Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Portable Radio 4 3 Use your portable radio 5 4 Product information 8 5 Troubleshooting 8 6 Notice 9 What's in the box Power supply Turn off Listen to FM/MW radio Charge mobile phone Charge the Ni-MH battery pack Turn the flashlight on Turn the alarm on 4 4 5 5 6 6 7 7 EN 2
1 Important • • • • • • • • • • • 3 Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Refer all servicing to qualified service personnel.
2 Your Portable Radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Operate on alkaline batteries 1 2 Open the battery compartment. Insert 3 x 1.5 V AAA batteries (not supplied) with correct polarity (+/-) as indicated. (Fig. ) c What's in the box Check and identify the contents of your package. (Fig.
Tip •• To make sure that the built-in battery has enough power to support the alarm and flashlight function in emergency case, you are recommended to use alkaline batteries in normal times. 3 Use your portable radio Operate on Ni-MH battery Listen to FM/MW radio To operate on the rechargeable Ni-MH battery pack, slide the power source selector to RECHARGE BATT. (Fig. ) 1 e 2 3 4 Slide the power source selector to BATT (Fig. ) or RECHARGE BATT. (Fig.
Charge mobile phone i This portable radio can also serve as an emergency charger for your mobile phone. In places where AC outlet is unavailable, your phone will never run out of power with this device. 1 2 Open the MICRO USB cover and take out the supplied USB cable. Plug the USB cable into a USB socket on your phone. (Fig. ) g »» The charing indication appears on your phone. Note •• If the supplied USB cable does not match the USB 3 Slide the power source selector to CHARGE MOBILE. (Fig.
»» The portable radio begins charging the Ni-MH battery. Turn the flashlight on (Fig. j ) k Turn the alarm on (Fig. Tip ) l •• It takes 8 hours to fully charge the battery. •• Fully charge the built-in battery if the radio has not been used for more than 3 months. Charge through power generator In emergency situation, you can charge the built-in battery through the power generator. 1 2 7 Switch the power source selector to OFF, BATT, or RECHARGE BATT.
4 Product information Warning •• Never remove the casing of this device. Note •• Product information is subject to change without prior notice. Tuner Tuning range 5 Troubleshooting FM: 87.0 - 108 MHz MW: 522 - 1620 kHz General information Power supply - Rechargeable battery Ni-MH battery pack - Alkaline battery 3 X AAA batteries Dimensions - Main Unit (W x H x D) 120 x 76 x 47 mm Weight - With Packing 0.32 kg - Main Unit 0.26 kg To keep the warranty valid, never try to repair the system yourself.
6 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AE1120_00_UM_V1.
