Specifications

EN
53
SNMP
Community
Use the SNMP configuration screen to display and modify parameters for the Simple
Network Management Protocol (SNMP). A computer attached to the network, called
a Network Management Station (NMS), can be used to access this information.
Access rights to the agent are controlled by community strings. To communicate with
the ADSL Modem Multiservices PSTN Voice, the NMS must first submit a valid
community string for authentication.
Parameter Description
Community A community name authorized for management access.
Access Management access is restricted to Read or Write.
Valid Enables or disables the entry.
Note: Up to 5 community names may be entered.
Trap
Parameter Description
IP Address Community
Version Traps are sent to this address when errors or specific events occur on
the network.
A community string (password) specified for trap management. Enter a
word, something other than public or private, to prevent unauthorized
individuals from reading information on your system.
Sets the trap status to disabled, or enabled with V1 or V2c.
The v2c protocol was proposed in late 1995 and includes
enhancements to v1 that are universally accepted. These include a get-
bulk command to reduce network management traffic when retrieving
a sequence of MIB variables, and a more elaborate set of error codes
for improved reporting to a Network Management Station.