Specifications

EN
37
802.1X
Management access will be checked against the authentication database stored on the
router. If an authentication RADIUS server is used, you must specify the secret key of
the Message-Authenticator attribute, i.e., Message Digest-5 (MD5), and the
corresponding parameters in the RADIUS Server Parameters field for the remote
authentication protocol.
See the description of the 802.1x features below.
Field Default Parameter Description
Server IP is set to 192.168.2.1 The IP address of the RADIUS server.
Server Port is set to 1812 UDP port used for RADIUS authentication
messages
Re-Authentication is defined in Defines a maximum period of time for
3600 seconds period which the period seconds RADIUS server
will dynamically re-assign a session key to a
connected client station
60 second Quit Period Defines a maximum period of time for
which the connection is maintained during
inactivity.
Seesion idle is set to 300 seconds Defines a maximum period of time for
before timeout which the router will wait between failed
authentications.
Server Type RADIUS using 802.1x Selects the authentication server type.
security control.
Secret Key set to None Secret Key None Defines a text string on
both the RADIUS client and server to
secure RADIUS traffic.The RADIUS server
requires the MD5 Message-Authenticator
attribute for all access request messages.
The 802.1x authentication scheme is
supported by using the Extensible
Authentication Protocol (EAP) over the
RADIUS server.
NAS-ID is set to None This defines the request identifier of the
Network Access Server (NAS) or RADIUS
client that is requesting client authentication
from the RADIUS server.