Specifications

EN
35
WEP
Wired Equivalent Privacy (WEP) encryption requires you to use the same set of
encryption/decryption keys for the router and all of your wireless clients.
See the description of the Access Control features below.
Parameter Description
WEP
WEP Mode You can choose disabled, 64-bit or 128-bit encryption.
Key Entry Method When MAC filtering is enabled, all registered MAC addresses are
controlled by the Access Rule.
Key Provisioning Select static key or dynamic key.
Static WEP Key
Setting You may manually enter the keys or automatically generate
encryption keys. To manually configure the keys, enter 10 digits for
each 64-bit key, or enter 26 digits for the single 128¬bit key.
(A hexadecimal digit is a number or letter in the range 0-9 or A-F.)
Default Key ID Select the default key.
Passphrase For automatic key generation, check the Passphrase box, enter a
passphrase and click ‘SAVE SETTINGS.’
Key 1-4 If you do not choose to use the Passphrase for automatic key
generation, you must manually enter four keys. For 64-bit
encryption, enter exactly 10 digits. For 128-bit encryption,
enter exactly 26 digits.
(A hexadecimal digit is a number or letter in the range 0-9 or A-F.)
Click ‘SAVE SETTINGS’ to apply your settings.