Specifications

EN
31
IP Address Pool Start IP
End IP Domain Name
Specify the start IP address of the DHCP pool. Do not include the gateway address of
the ADSL Modem Multiservices PSTN Voice in the client address pool. (See ‘TCP/IP
Configuration’ on page 11). If you attempt to include the ADSL Modem Multiservices
PSTN Voice gateway address (192.168.2.1 by default) in the DHCP pool, an error
dialog box will appear. If you change the pool range, make sure the first three octets
match the gateway’s IP address, i.e., 192.168.2.xxx.
Specify the end IP address of the DHCP pool.
If your network uses a domain name, enter it here. Otherwise, leave this field blank.
Remember to configure your client PCs for dynamic address allocation. (See ‘TCP/IP
Configuration’ on page 11 for details.)
Wireless
The ADSL Modem Multiservices PSTN Voice also operates as a wireless access point,
allowing wireless computers to communicate with each other. To configure this
function, you need to enable the wireless function, define the radio channel, the
domain identifier, and the security options.
Wireless Settings
Check Enable and click ‘SAVE SETTINGS.’
Channel and SSID
You must specify an Service Set ID (SSID) and a common radio channel to be used by
the ADSL Modem Multiservices PSTN Voice and all of its wireless clients. Be sure
you configure all of its clients to the same values. The SSID is case-sensitive and can
consist of up to 32 alphanumeric characters. Functioning as an access point, the
Gateway can be configured for roaming clients by setting the SSID and wireless
channel.