Specifications

System Settings

Time Settings

Set the time zone and time server for the ADSL Modem Multiservices PSTN Voice.

This information is used for log entries and client access control.

Check ‘Enable Automatic Time Server Maintenance’ to automatically maintain the

ADSL Modem Multiservices PSTN Voice’s system time by synchronizing with a public

time server over the Internet. Then configure two different time servers by selecting

the options in the Primary Server and Secondary Server fields.

Password Settings

Use this page to restrict access based on a password. By default, there is no

password. For security you should assign one before exposing the ADSL Modem

Multiservices PSTN Voice to the Internet.

Passwords can contain from 3 to12 alphanumeric characters and are not case

sensitive.

Note: If your password is lost, or you cannot gain access to the user interface, press the

reset button (colored blue) on the rear panel (holding it down for at least

five seconds) to restore the factory defaults. (By default there is no password.)