Specifications

1. Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP

Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your

Default Gateway is 192.168.2.254. These values confirm that your ADSL Modem

Multiservices PSTN Voice is functioning.

2. Type ‘EXIT’ and press the ENTER key to close the Command Prompt window.

Manual IP Configuration

1. Follow steps 1-4 in ‘DHCP IP Configuration’ on page 11.

2. Select ‘Use the following IP address automatically.’ Enter an IP address based on

the default network 192.168.2.x (where x is between 2 and 254), use

255.255.255.0 for the subnet mask and the IP address of the ADSL Modem

Multiservices PSTN Voice (default: 192.168.2.1) for the Default gateway field.

3. Select ‘Use the following DNS server addresses.’

4. Enter the IP address for the ADSL Modem Multiservices PSTN Voice in the

Preferred DNS server field. This automatically relays DNS requests to the DNS

server(s) provided by your ISP. Otherwise, add a specific DNS server into the

Alternate DNS Server field and click OK to close the dialog boxes.

5. Record the configured information in the following table.

TCP/IP Configuration Setting

IP Address ____.____.____.____

Subnet Mask ____.____.____.____

Preferred DNS Server ____.____.____.____

Alternate DNS Server ____.____.____.____

Default Gateway ____.____.____.____

Disable HTTP Proxy

You need to verify that the ‘HTTP Proxy’ feature of your web browser is disabled.

This is so that your browser can view the ADSL Modem Multiservices PSTN Voice’s

HTML configuration pages.

Your computer is now configured to connect to the ADSL Modem Multiservices

PSTN Voice.