Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Docking Speaker 3 3 Get started 5 4 Play 5 5 Product information 7 6 Troubleshooting 8 7 Notice 9 Introduction What's in the box Overview of the main unit Connect power Play from iPod/iPhone Play from Bluetooth device Play from an external audio device Adjust volume Specifications About Bluetooth device Disposal of your old product Bluetooth Statement 3 3 4 5 5 6 7 7 7 8 9 9 EN 2
1 Important • • • • • • • • • • • • • 3 Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Overview of the main unit a b e c d a Dock for the iPod/iPhone b VOL +/• Adjust volume. c MP3-LINK • Connect an external audio device. d DC IN • Connect power. e • Enable or disable Bluetooth function.
3 Get started Always follow the instructions in this chapter in sequence. 4 Play Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Note •• The type plate is located at the back of the docking speaker.
Charge the iPod/iPhone When the docking speaker is connected to power, the docked iPod/iPhone begins to charge automatically. Play from Bluetooth device Pair with Bluetooth devices Note •• Before you connect a Bluetooth device to this docking speaker, familiarize yourself with the Bluetooth capabilities of the device. •• The effective operational range between the docking system and the paired device is approximately 10 meters.
Play from an external audio device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. 5 Product information Note •• Product information is subject to change without prior Note notice. •• Make sure that no iPod/iPhone is docked in the docking speaker. 1 2 Specifications Connect an MP3 link cable (not supplied) to: • the MP3-LINK socket at the back of the docking speaker. • the headphone socket on an external device.
6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AD620_12_UM_V1.
