Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Docking Speaker 4 3 Get started 6 4 Play 7 5 Specifications 8 6 Troubleshooting 8 7 Notice 9 Introduction What's in the box Overview of the main unit Connect power Play from iPod/iPhone Play from an external audio device Charge the iPod/iPhone Amplifier General information 4 4 5 6 7 7 7 8 8 EN 2
1 Important • • • • • • • • • 3 Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Overview of the main unit a b d c e g f a b • Start or pause play. • Mute sound. c VOLUME + / • Adjust volume. d Dock for the iPod/iPhone e MP3-LINK • Connect an external audio device. f Battery compartment g DC IN • Connect AC power.
3 Get started Option 2: Battery power Caution Always follow the instructions in this chapter in sequence. •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Remove batteries if they are exhausted or will not be used for a long time. Connect power •• Batteries contain chemical substances, so they should be disposed of properly. This docking speaker can be powered by either AC power or batteries.
4 Play Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker supports the following iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone To remove the iPod/iPhone: Pull the iPod/iPhone out of the dock.
5 Specifications Amplifier Total Output Power Signal to Noise Ratio MP3 Link Warning 4W per channel x 2 > 62 dBA 650mV RMS General information Power supply -AC Power Adaptor -Battery Power Operation Power Consumption Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - Main Unit 6 Troubleshooting Model: AS110-080AE130 (Philips); Input: 100-240 V ~, 50/60Hz, 0.5A; Output: 8.0 V 1.3 A 4X1.5V AA/UM3/LR6 15 W <0.5 W 265 x 94 x 74 mm 0.9 kg •• Never remove the casing of this apparatus.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AD440_12_UM_V1.
