Register your product and get support at www.philips.
Contents 1 Important 2 2 3 2 Your docking speaker 5 5 5 5 3 Prepare 6 6 6 6 4 Play 7 7 7 7 7 7 5 Specifications 9 9 9 Safety Notice Introduction What's in the box Overview of the main unit Connect power Turn the unit on Adjut brightness Listen to the iPod/iPhone Adjust sound Compatibility Charge the iPod/iPhone Play from an external device Amplifier General information 6 Troubleshooting 10 EN 1
1 Important Before using your product, read all accompanying safety information. Safety • • • • • This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S.
2 Your docking speaker Overview of the main unit Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Prepare Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC adaptor, make sure that you have completed all the other connections. Connect the AC power cord to • the power socket on the back of the unit.
4 Play Listen to the iPod/iPhone 1 2 Load your iPod/iPhone. Play your iPod/iPhone. »» Your music on the phone comes out through the device. Note •• After docking your iPod/iPhone onto the device, the time on your iPod/iPhone is displayed on the panel of the device automatically.
Connect the MP3 link cable to: • the AUX IN socket on the back of unit. • the headphone socket on an external audio player.
5 Specifications Amplifier Rated Output Power 2 X 2 W RMS General information AC Power Operation Power Consumption Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - Main Unit Y12FE-050-2000G (Philips) Input: 100-240 V ~, 50/60Hz; Output: DC 5.0V 2 A <10 W <1 W 216 x 102 x 112 mm 0.
6 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2011 Koninklijke Philips Electronics N.V. All rights reserved. AD300_12_UM_V1.
