Register your product and get support at www.philips.
Contents 1 Important 4 4 2 Your docking speaker 5 5 5 5 3 Prepare 6 6 4 Play 7 7 7 8 8 5 Specifications 9 9 9 Safety Introduction What's in the box Overview Connect power Use your iPod/iPhone Play from an external device Adjust volume Adjust brightness of LCD screen Amplifier General information 6 Troubleshooting 10 7 Notice 11 11 11 11 11 Compliance Care of the environment Copyright Trademark notice EN 3
1 Important Safety Read and understand all instructions before you use this docking speaker. If damage is caused by failure to follow the instructions, the warranty does not apply. • • • The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filledobjects, lighted candles). Where the plug of the direct plug-in adaptor is used as the disconnect device, the disconnect device shall remain readily operable.
2 Your docking speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model number and serial number of this product. The model number and serial number are on its bottom. Write the numbers here: Model No. __________________________ Serial No.
3 Prepare Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. •• Risk of electric shock! When you unplug the AC power adaptor, always pull the plug from the socket. Never pull the power cord. •• Before you connect the AC power adaptor, make sure that you have completed all the other connections.
4 Play 2 Play a file on your iPod/iPhone. »» Music comes out through this device. Note Use your iPod/iPhone Compatible iPod/iPhone models This docking speaker supports the following iPod and iPhone models. • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone • iPod touch (1st, 2nd, 3rd, and 4th generations) • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generations) • iPod classic • iPod with video • iPod with color display • iPod mini •• If power is interrupted, the clock on this device is reset.
Adjust volume Press +/- repeatedly. • +: Increase the volume • -: Decrease the volume Adjust brightness of LCD screen To adjust the brightness of LCD screen, press repeatedly.
5 Specifications Note •• Specifications are subject to change without notice. Amplifier Rated output power Signal-to-noise ratio AUX IN 2 X 2 W RMS 65 dB 0.6 V RMS 10 kohm General information AC power adaptor Operation power consumption Standby power consumption Dimensions of main unit (W x H x D) Weight of main unit Input: 100-240 V ~, 50/60Hz, 0.35 A; Output: 5.0V , 2,000 mA Model No.: Y12FE-0502000G Brand name: Philips < 10 W < 1W 216 x 102 x 112 mm 0.
6 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Compliance Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AD300_12_UM_V2.
