User manual

9
English
Setthesensitivityoftheair
quality sensor
People with certain health problems (for example:
allergies or asthma) have a greater need for
healthy air. For this reason, the purier allows you
to adjust the sensitivity of the air quality sensor.
If you set it to higher sensitivity level, the purier
starts cleaning the air at lower pollution level.
There are 3 sensitivity levels:
• standard
• sensitive
• extra sensitive
The pollution sensor is set to standard
sensitivity. You can adjust the sensitivity of
the air quality sensor in the following way.
Note
•
When it is set to a higher sensitivity, the
purier starts cleaning the air at lower
pollution levels to make the air even cleaner.
Plug the purier before adjusting the sensitivity
of the air quality sensor.
1 Press the

button and simultaneously
put the power plug in the power socket.
» The purier beeps twice and one of
the

lights ( , , or ) goes on to
show the current sensitivity level of
the air quality sensor.
Timer light Sensitivity level
extra sensitive
sensitive
standard
Switch on
1
Plug the air purier into the power supply.
» All lights go on twice and you hear a
beep. Then, the lights go out again.
AC4012 Control
Panel
AC4014 Control
Panel
2 Press the

button to switch on the
purier.
» The air quality light shows the current
air quality.
» The fan speed
light goes on.
3 Press and hold the

button for 2
seconds to switch off the purier.
EN
English