User manual

18
8 Resetthefilter
lifetimecounter
When you replace the lters, it is important
that you also reset the lter lifetime counter
afterwards. This allows the purier to be in sync
with the lter lifetime.
After you have replaced the lters, reset the
lter time:
1 Switch off the purier and unplug it.
2 Replace the air purier lters (see
‘Replace the lters’).
3 Put the plug in the power socket and
switch on the purier again.
EN
4 Press and hold the button for 2
seconds.
Note
•
Reset the purier when it is plugged in and
switched on.
• Only replace the lters when you see the
light goes on.