Photo Frame User manual Manuel d'utilisation Manual del usuario Benutzerhandbuch 9FF2
Content Philips © 2006 2006.8 First Version V06.08.10 4.1.2 Play All albums or selected slideshow ........................................................................- 23 4.1.3 Add Album to Slideshow ...............- 23 4.1.4 Remove Album from Slideshow...- 25 4.1.5 Rename Slideshow...........................- 26 4.1.6 Delete Slideshow .............................- 27 4.2 Slideshow Sequence ...........................- 28 4.3 Transition Effects ................................- 29 4.4 Frequency .......
Introduction Philips digital Photo Frame can be placed either vertically or horizontally to fit the photos on display. Its internal rechargeable battery provides you with the freedom to pass it around and show photos without the power cord. Or, you can place it somewhere in a room for a continuous display by connecting it to the mains power supply.
1. Getting started 1.
1.2 Initial setup Remove the parts from the packaging 1.2.1 Connecting Power Source Connect the supplied power cable from Photo Frame to a power outlet. The internal battery will start charging and the battery LED turns blue and flashes. This will take approximately 3 hours. 1.2.2 Locate Control Buttons Use your Photo Frame by pressing the control buttons in the back. Power on/off Rest Button • The control buttons and instructions are shown at the bottom of the menu screen. Navigation Controller 1.
1.2.4 Select Language Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu. Navigate down to go to language. Navigate right to enter the language menu. Navigate up and down to select your preferred language (select between English, French, Spanish, Italian, Polish, Chinese and Japanese). Press the OK button to confirm your selection. The new setting will be effective immediately.
Navigate left and right to move between hours, minutes and AM/PM. Press the OK button to confirm selection. Date: Navigate up and down to select the date. Navigate left and right to move between days, months and years. Press the OK button to confirm selection. Show Clock: Navigate up and down to select Show clock. Navigate right then up and down to select Yes or No. Press the OK button to confirm selection.
• • To remove the Compact Flash card, pull out the card slowly. To remove the XD, XD, SD, MMC, or Memory Stick card, push the card again to unlock and then pull out the card. Note: To copy photo from the memory card to the Photo Frame read the copying photo section. Tips: - Increase the memory of the Photo Frame by permanently inserting permanently a memory card into it. This allows the same functions as the internal memory to be performed.
2. Enjoying Photos 2.1 Browse Mode Slideshow mode is entered once you turn on the Photo Frame. Navigate left and right to move quickly through the photos. Note 1: The frequency of the slideshow can be adjusted. To do so please read “slideshow frequency” section. Note 2: For slideshow creation and management read the section “Creating and managing slideshow” Note 3: Photos are easily editable from slideshow mode by pressing the OK button. To go directly to thumbnail mode form read the photo menu section 2.
3. Managing Photos and Albums 3.1 Thumbnail Access and Navigation A large number of Photos can be viewed quickly using thumbnails. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the photo source to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. Navigate left and right to move between photos.
3.2 Quick access to thumbnai Thumbnails can be accessed directly from the slideshow by pressing the OK button. The thumbnail with the mini preview is launched and the picture last seen on the slideshow when you pressed the OK button is displayed. 3.3 Photo selection – single and multiple Using the method below you can select either single, multiple or all 16 photos. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu.
3.4 Photo Menu This menu allows the control all aspects of managing your photos. Copy, Delete and Move photos as well as select various effects, frames to apply to your photos. 3.4.1 Copying Photos You can copy photos stored on a memory card or PC to Photo Frame internal memory or in a Memory card plugged in the Photo Frame. Photo Frame will then internally store a resized copy of the original photo. This resized copy will remain inside Photo Frame until you delete it from Photo Frame.
Navigate right to go to the source you want to copy your photo to. Navigate down to select the media to copy to. Navigate right to select which album to copy to. Press the OK button to begin copying. The copy screen disappears upon completion and a resized copy of the photo is stored inside the selected album. You may move to other photos and continue this process until all the photos you want are copied to the selected album.
To copy from Photo Frame to PC • Copy the photos on Photo Frame to PC the same way you transfer the contents of a digital camera to PC. All photos are stored in the sub-directories of the \DCIM\on the Photo Frame drive.
3.4.2 Deleting Photos2 If you need to free up space on the Photo Frame or a memory card you can delete photos. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the slideshow menu. Navigate down to select the source to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. When you delete a photo, Photo Frame will show the status and return to the album after completion.
3.4.3 Rotating, Zooming and Cropping3 Photo Frame can change the orientation of photos and change the framing of photos. Note: The crop function only applies to original photos stored on external memory card. Rotating Press the menu button to access the Main Menu. Navigate right or press the OK button to access the slideshow menu. Navigate down to select the media to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album.
Zooming and Cropping Note: To retain image quality it is recommended that zooming and cropping is carried out before the image is stored in an album. This function only applies to original photos not those processed by the photo Frame Note: All photos processed and copied by the photo Frame will be resized for optimal display on Photo Frame and to save storage space Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu.
3.4.4 Moving Photos4 Photos can only be moved between albums created by Photo Frame on internal memory or external memory card. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the media to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. Press the navigation buttons to move between photos. Press the OK button to select individual images.
3.4.5 Photo Effects5 Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the media to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. Press the menu button to access the Photo Menu Select the photo to change.
3.4.6 Frames6 Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the media to browse. Navigate right to enter the required album. Navigate right to view the photos in the chosen album. Press the OK button to select the photo to add the frame to. Navigate down to select the desired frame. Press OK to apply the frame.
3.5 Album Menu 3.5.1 Creating New Photo Album To organize your photos you can create photo albums on your Photo Frame or memory card and select which albums to be used in slide shows. There is a limit of 500 albums that can be created. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the media to browse. Navigate right to select the new album.
3.5.2 Rename Album Albums can be renamed at any time by following the instructions below. Press the menu button to access the Main Menu. Navigate right or press the OK button to access the Photo menu. Navigate down to select the media to browse. Navigate right to enter the required album. Press the menu button to access the album menu. Navigate right to create a new album and enter the on screen keyboard.
4 Creating and Managing Slideshows To tailor your own slide shows You can handpick the albums for slideshow, select a slideshow frequency that determines, how long a photo remains on screen, select transition effect, how next photo replaces current one on screen, and sequential or random. 4.1 Slideshow 4.1.1 Create New Slideshow To play all the photos in the Photo Frame follow the instructions below. Press the menu button to access the Main Menu.
4.1.2 Play All albums or selected slideshow To play all the albums in the Photo Frame follow the instructions below. Press the menu button to access the Main Menu. Slideshow menu shows the settings available for slideshows. Navigate down to highlight the slideshow icon. Navigate right and to album list. Navigate right or press the OK button to access the slideshow menu. Navigate up and down to select all albums or individual albums. Press slideshow to start playing the slideshow 4.1.
Navigate right to go to the slideshow list. Navigate down to go to the slideshow where the album is to be added to. Press the menu button. Navigate right to pick the album to be added and press OK to add.
4.1.4 Remove Album from Slideshow This function removes the selected album from the slideshow. It does not delete the album. To delete the album permanently see the Delete Album section. Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate right to access the storage menu. Navigate right to access the slideshow list. Navigate down to go to the slideshow.
4.1.5 Rename Slideshow This function removes the selected album from the slideshow. It does not delete the album. To delete the album permanently see the Delete Album section. Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate right to access the storage menu. Navigate right to access the slideshow list. Navigate down to go to the slideshow.
4.1.6 Delete Slideshow Deleting a slideshow will NOT remove the images the from the Photo Frame, simply remove the slideshow name and list. Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate right to access the storage menu. Navigate right to access the slideshow list. Navigate down to go to the slideshow you want to delete and press the menu button.
4.2 Slideshow Sequence Slideshows can be played in one of two ways randomly or sequentially. Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate down to access the sequence menu.
4.3 Transition Effects The photos can appear on the screen in one of 3 ways Fade, Slide or Scroll. Press the menu button to access the Main Menu. Navigate down button to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate down to go to Transition Effect. • Navigate right to highlight the effect.
4.4 Frequency Use this function to select how long each photo is displayed during the slide show. Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate down to access the frequency menu. Navigate Right. Navigate down to move to the required transition time Press the OK button to confirm. Note: This function applies to all the slideshows stored on all media.
4.5 Collage To show multiple photos arranged on the screen at the same time select collage. Note: Photos formatted in such a way as not to fit the Photo Frame display normally appear with a black border. Collage automatically fills these borders with multiple displays of the same photo. Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate down to access the collage menu. Navigate Right.
4.6 Background Color Use this function to select the background border color for photos that are smaller than the Photo Frames display (these photos appear with black borders). Press the menu button to access the Main Menu. Navigate down to highlight the Slideshow icon. Navigate right or press the OK button to access the slideshow menu. Navigate down to access the background color menu. Navigate Right to access the color list.
5 Setup Use this section to setup Photo Frame brightness levels, Time and date settings, turning off the beep sound, checking the Photo Frame status and on-screen information display language and enable the delete function on your memory card. In addition, you can set your daily automatic turn-off and turn-on time for Photo Frame, set an event reminder and decide if you want to show a time clock on the display. 5.
5.2 Language Use this section to choose the menu language of the Photo Frame. Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to go to language Navigate right to enter the language menu. Navigate up and down to select your preferred language (select between English, French, Spanish, Italian, Polish, Chinese and Japanese). Press the OK button to confirm your selection.
5.3 Memory Card Use this feature to allow the delete function on the inserted memory card Delete Permission Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to Memory Card Navigate right to Delete function Navigate right select Do Not Allow or Allow Press OK to confirm choice.
5.4 Event Reminder Use this function to set reminders for special days. You can select the Photo to be displayed at a selected time and date. 5.4.1 Create New Step 1 Create New Alarm Event Reminder Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to Alarm reminder Navigate right to go to New Alarm reminder. Press the OK button.
Step 2 Event Reminder Photo Select the Photo that will be displayed when the reminder starts. Navigate right and down to go to Photo. Press the OK button to confirm selection. Navigate down to select photo.
Step 3 - Event Reminder Time Define the time of the day when the reminder will start. Navigate right and down to go to Time. Press the OK button to confirm selection. Navigate Up and down to move between hours, minutes and AM/PM Step 4 Event Reminder Date Select the date when the Event reminder will start. Navigate right and down to go to Date. Press the OK button to confirm selection. You can choose to have this alarm every day or to schedule a specific date.
Deleting an event reminder Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to event reminder Navigate right and down to go to the event name. Navigate right to go to Delete Alarm. Navigate up and down to select either yes or no Press the OK button to confirm selection.
5.4.1 Snooze A snooze function is available so that the reminder can be temporarily turned off. Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK to access the setup menu. Navigate down to Alarm. Navigate right and down to go to snooze. Navigate right and down to go to select between ON/ Off, 5 minutes or 10 minutes. Press the OK button to confirm selection.
5.5 Time, Date and Clock Use this function to set the time and date of the Photo Frame. Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to Time and Date Navigate right to access the Time and Date settings. Navigate right to go to Time. Navigate right and down to go to Date. Time: Navigate up and down to select the time.
5.6 Auto On/Off Use this function to select when the Photo Frame turns on for both weekdays and weekends. Depending on your lifestyle and schedule, you may want to have the Photo Frame to automatically turn ON and OFF the different time during the weekdays and when you are at work during a week day and at different time during the weekend.
Navigate down to go to Auto On. Navigate up and down to change the time. Navigate right to move between the hours and minutes. Press OK to confirm. Repeat to change Auto Off Press Play Slideshow to leave this menu and play the slideshow Weekend – Saturday 00:00 to Sunday 23:59 Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to select the Auto On/Off function Navigate right to weekend.
Press Play Slideshow to leave this menu and play the slideshow Note: Digital Photo Frame will automatically turn off its display exactly at the Auto-off time; if the time has already passed it will go into Auto-off status at the next set time. Note 2: If you want to turn ON the Photo Frame during an auto OFF period, just press any key, the Photo Frame will wake up until the next auto OFF period.
5.7 Auto Tilt With this function your photos will automatically be properly positioned no mater whether you have the Photo Frame positioned horizontally or vertically. Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to go to Auto tilt. Navigate right to go to On or Off. Press OK to confirm selection.
5.8 Beep On/Off Turning the button sounds ON or OFF Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu Navigate down to go to beep. Navigate right to go to On or Off. Navigate down or Press OK to confirm selection.
5.9 Status Press the menu button to access the Main Menu. Navigate down to highlight the setup icon. Navigate right or press the OK button to access the setup menu. Navigate down to go to status. The status of the Photo Frame is shown in the right window. If you have a memory card in the Photo Frame it will give you the status of the card (card Type and free memory left).
6 Getting help 6.1 Checking Display Status You may check the status of your Photo Frame— whether the system is ON, if the battery is charging, how many more photos can be stored, how much battery power remains, which media are currently connected, or the Photo Frame software version.
6.2 Taking Care of Photo Frame 1) Do not drop Photo Frame is a complicated electronic device and cannot withstand shock from being dropped. Do not expose to moisture Photo Frame is neither moisture proof nor moisture resistant. Exposing it to moisture or liquid of any kind will very likely damage your Photo Frame. Do not hit or scratch The LCD panel of Photo Frame is made of glass and is therefore sensitive to abnormal force and sharp edges. Screen cleaning Use only a dry soft cloth to clean your screen.
6.3 Frequently asked questions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Q: Is the LCD screen touch-enabled? A: The LCD screen is not touch-enabled. Use the buttons on the back to control Digital Photo Frame. Q: Can I switch between different slideshows photos by using different memory cards? A: Yes. When a memory card is connected to the Digital Photo Frame, it’ll slideshow photos stored on that specific card. Q: How can I quick-charge my Photo Frame? A: Charge it with the system in OFF status.
15) A: Connect Photo Frame to PC and put photos directly under the root directory of the Photo Frame drive. Disconnect the USB cable. After a few seconds, all photos in the root directory will be automatically added to Photo Frame and the directory will be emptied. Note that this operation does not apply to photos in sub-directories. Q: I'm trying to upload pictures from my PC to a memory card, which I'm then inserting into the DPD. However, the DPD doesn't show the photos.
6.4 Troubleshooting Please see below for various situations and recommended actions. Situations Recommended actions Warning message: "Low battery" Recharge Photo Frame or turn off Photo Frame before it can be recharged again. If the Photo Frame's internal battery level drops completely to zero, the "Current time" setting may be lost. Warning message: "No free space to store more photos" It means your Photo Frame is fully loaded with photos.
6.5 Service and Warranty Your Philips Warranty Thank you for purchasing this Philips product. All Philips products are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please check our website www.philips.com/support before you contact the Philips helpdesk.
- Product requires modification or adaptation to enable it to comply with local or national technical standards, which apply in countries for which the product was not originally designed, manufactured, approved and/or authorized. Therefore always check whether a product can be used in a specific country. - Note that for products that are not originally designed, manufactured, approved and/or authorized for usage within the country of use the Philips global warranty terms apply.
Greece 00800 3122 1223 Local call tariff Ireland 01 601 1161 Local call tariff Italy 199 404 042 € 0.25 Luxembourg 26 84 30 00 Local call tariff The Netherlands 0900 0400 063 € 0.20 Norway 2270 8250 Local call tariff Portugal 2 1359 1440 Local call tariff Spain 902 888 785 € 0.15 Sweden 08 632 0016 Local call tariff Switzerland 02 2310 2116 Local call tariff United Kingdom 0906 1010 017 £0.
7 Appendix 7.1 Philips Pixel Defect Policy Philips Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable.
One lit red, green or blue sub pixel Two adjacent lit sub pixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) Three adjacent lit sub pixels (one white pixel) A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
Total black dot defects of all types 3 TOTAL DOT DEFECTS ACCEPTABLE LEVEL MODEL 9FF2 series Total bright or black dot defects of all types 4 - 58 - Philips Electronics
7.2 Regulatory Recycling Information for Customers • Banned Substance Declaration • CE Declaration Confirmity • FCC Declaration of Conformity • Federal Communications Commission (FCC) Notice (U.S.
- EN61000-3-2:2000 (Limits for Harmonic Current Emission) - EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable - 73/23/EEC (Low Voltage Directive) - 89/336/EEC (EMC Directive) - 93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on ISO9000 level. Federal Communications Commission (FCC) Notice (U.S.
Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EN 55022 Compliance (Czech Republic Only) VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.
North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
End-of-Life Disposal Your new product contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.
7.3 Specification Picture/Display - Effective viewing area: 169.6 x 111.
- Slideshow setting: Collage, Random, Sequential, Transition effect - Screen background color: Black, White, Gray - Setup function: Brightness adjustment, Language, Status, Auto on/off on weekday/weekend, Beep on/off, Set time and date, Clock display enable/ disable, Event reminder with snooze, Photo source - System status: Battery level, Firmware version, Power source, Remaining memory - Connected media status: Connected media, Remaining memory - OSD Languages: English, French, German, Italian, Japanese, R
Taking care of your Photo Frame 1) 2) 3) 4) 5) 6) 7) Do not drop Photo Frame is a complicated electronic device and cannot withstand shock from being dropped. Do not expose to moisture Photo Frame is neither moisture proof nor moisture resistant. Exposing it to moisture or liquid of any kind will very likely damage your Photo Frame. Do not hit or scratch The LCD panel of Photo Frame is made of glass and is therefore sensitive to abnormal force and sharp edges.
Frequently Asked Questions ________________________________________ 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Q: Is the LCD screen touch-enabled? A: The LCD screen is not touch-enabled. Use the buttons on the back to control Digital Photo Frame. Q: Can I switch between different slideshows photos by using different memory cards? A: Yes. When a memory card is connected to the Digital Photo Frame, it’ll slideshow photos stored on that specific card.
15) A: Connect Photo Frame to PC and put photos directly under the root directory of the Photo Frame drive. Disconnect the USB cable. After a few seconds, all photos in the root directory will be automatically added to Photo Frame and the directory will be emptied. Note that this operation does not apply to photos in sub-directories. Q: I'm trying to upload pictures from my PC to a memory card, which I'm then inserting into the DPD. However, the DPD doesn't show the photos.
