Register your product and get support at www.philips.
Content Introduction 1. Important Information 1.1 Safety precautions and maintenance 1.2 Care of the PhotoFrame 1.3 Recycling 3 3 3 4 2. 2.1 2.2 2.3 2.4 Your PhotoFrame What’s in the Box Control Buttons and Menu Navigation Connections Product Highlights 5 5 6 6 7 3. 3.1 3.2 3.3 3.4 Getting started Placing the Product Connecting to the Mains Turning on your PhotoFrame Initial Setup 8 8 8 8 8 4. 4.1 4.2 4.3 4.
Philips digital PhotoFrame can be placed either vertically or horizontally to fit the photos on display.You can place it somewhere in a room for a continuous display by connecting it to the mains power supply. 1. Important 1.1 Safety precautions and maintenance Read and follow these instructions when connecting and using your PhotoFrame: • To protect your display from possible damage, do not put excessive pressure on the LCD panel.
5 Keep the stand clear from cables Make sure the stand of your PhotoFrame is clear from cables as cables could pull the stand out of PhotoFrame to the floor. 6 Temperature and humidity limitations Operating temperature: 0° ~ 40° (Celsius) / 32° ~ 104° (Fahrenheit) Humidity: 20% ~ 80% 1.3 Recycling • The PhotoFrame uses materials that can be recycled.
Your PhotoFrame 2.1 What’s in the box ENGLISH 2. Register your product and get support at www.philips.
2.2 Control Buttons and Menu Navigation 2.3 Connections 2.3.1 Memory Card Photo display (underside) A • Use your PhotoFrame by pressing the control buttons in the back. • The control buttons and instructions are shown at the bottom of the menu screen. B A. CF Card(Type I) B. SD/MMC/MS/xD Card Inserting a memory card: • Insert the memory card into the slot in the frame. • For xD, SD, MMC, MMC+, or Memory Stick cards slide the card until it locks in place.
USB Connections 2.4 For Windows PC (XP & Vista): • Connect PhotoFrame to a PC via a USB cable (not supplied) where it will be recognized as a mass storage device. • For installation and more details about his application, follow instrustions in user manual. PhotoFrame Product highlights The PhotoFrame is designed to be flexible and convenient to use and it provides the following features: • High pixel density for sharp and crisp photo display. • View photos directly from memory cards – no PC needed.
3. Getting started 3.1 Placing the Product The PhotoFrame should be placed on a flat surface and close to a power socket. Keep it away from high temperatures and high levels of moisture 3.2 Connecting to the mains 3.4 Initial Setup 3.4.1 Setup the Language Press the Mode button to toggle to the Main Menu, select the Setup and press Play/OK to Language.
1 • Press the Mode button to access the Main Menu . • Navigate Down to highlight Clock and press Play/OK. Date: • Navigate Up and Down to select the date. • Navigate Left and Right to move between days, months and years. • Press the Play/OK button to confirm. Press the Mode button to leave this menu and play the slideshow. 2 • From the Clock screen, press Play/OK. • Navigate Down to Time and Date. • Navigate Right to Time/Date/12/24 hr/ Slideshow Clock and press the Play/OK button.
5 Time: • Navigate Up and Down to select the time. • Navigate Left and Right to move between hours and minutes. • Press the Play/OK button to confirm. Day: • Navigate Up and Down to select Everyday, Weekday, or Weekend. • Press the Play/OK button to confirm. On/Off : • Navigate up or down to select Off or On. • Press the Play/OK button to confirm. 1. To quick access the clock when in slideshow, press Play/OK twice. 2.
Using your PhotoFrame 4.1 View Photos View pre-stored photos 1 Press the Mode button to go to the Main Menu. 2 In the Main Menu select photos, select the source as the type of memory card installed (SD/MMC,CF Card, Memory Stick, xD Cards). 3 Press Play/OK, to play the photos in slidehow mode. Note 2: Photos are easily editable from slideshow mode by pressing the Memu button. To go directly to thumbnail mode form read the section of “ 5.2 Photo Menu ”. 4.2.3 To display photos in Clock mode.
2 • Navigate Down to select the photo source to browse. • Press Play/OK to access the source. 4.3.1 Copy from a Memory Card to your PhotoFrame 1 Insert a memory card into the Photoframe 2 Press Mode to go to the Main Menu . 3 Select the Photo and then go to the photo source. 4 Go to thumbnail mode to select a photo. 5 Press Menu to access the menu options for photo editing.
Delete Photos using the PhotoFrame If you need to free up space on a memory card you can delete photos. 1 • Press the Mode button to access the Main Menu . • Navigate Up to Photo and press the Play/OK button. 3 • Press the Menu button and navigate Down to Delete. • Press Play/OK • Navigate Up or Down to Yes or No. Press Play/OK. • Navigate Right to Yes to confirm the deletion and press Play/OK. ENGLISH 4.4 Press the Mode button to leave this menu and play the slideshow.
5. Use more of your PhotoFrame 5.1 Menu Navigation The menu is navigated using the navigation controller and the menu buttons. When in a menu follow the onscreen instructions in the bottom right of the screen for details on how to navigate. • Navigate the controller Left and Right to cycle through the menus. • Navigate Down and Up to select options. • Press the Menu button to go to the main menu. • Press the Play/OK button to make a selection.
Press the Mode button to leave this menu and play the slideshow. Zoom and Crop Note 1: To retain image quality it is recommended that zooming and cropping is carried out before the image is stored in the PhotoFrame. 2 • Navigate Down to select the media to browse and press Play/OK. • Press the Up, Down, Left or Right keys to find the image you want to rotate. 3 • Press the Menu button and navigate Up to Zoom and Crop. • Press Play/OK or navigate Right.
5.2.2 Photo Effects This section describes how to apply the Sepia photo effect to your photos. 1 • Press the Mode button to access the Main Menu. • Navigate Up to Photo and press the Play/ OK button. 3 • Press the Menu button and navigate Up to Photo Effects. • Press Play/OK or navigate Right. • Navigate Up or Down to the required effect. Press Play/OK to confirm and return to the thumbnail images. Press the Mode button to leave this menu and play the slideshow.
ENGLISH 2 • Navigate Down to select the media to browse and press Play/OK. • Press the Up, Down, Left or Right keys to find the image you want to add the frame to. 3 • Press the Menu button and navigate Up to Frames. • Press Play/OK or navigate Right. • Navigate Up or Down to the required frame. Press Play/OK to confirm and return to the thumbnail images. Press the Mode button to leave this menu and play the slideshow. Note: Frames can be removed by selecting no frame.
6. Settings Use this section to setup the PhotoFrame slideshow squences, transition effects, frequency of the change of image, collage effects, background color, brightness levels, display language, enable the delete function on your memory card, automatically turn on and off, check the PhotoFrame status , tilt functions, turning off the beep sound and turning on and off the key help screen when first starting the PhotoFrame 6.1 2 • Navigate Down to access Sequence and navigate Right.
Press Mode button to leave this menu and play the slideshow. Note 1: This function applies to all the slideshows stored on all media. Note 2: Random plays different effects out of sequence during the slideshow transition. 6.3 Frequency Use this function to select how long each photo is displayed during the slide show. 1 • Press the Mode button to access the Main Menu. • Navigate Up to Setup and press the Play/OK button. 2 • Navigate Down to access Frequency and navigate Right.
6.4 Collage 6.5 Background Color To show multiple photos arranged on the screen at the same time select collage. Use this function to select the background border color for photos that are smaller than the PhotoFrame display (these photos appear with black borders). 1 • Press the Mode button to access the Main Menu. • Navigate Up to Setup and press the Play/OK button. 2 • Navigate Down to access Collage and navigate Right. • Navigate Up and Down to select Off or Random. • Press Play/OK to confirm.
6.7 Language Change the brightness settings of the PhotoFrame to achieve the best visibility depending on the light conditions. Use this section to choose the menu language of the PhotoFrame. 1 • Press the Mode button to access the Main Menu. • Navigate Up to Setup and press the Play/OK button. 2 • Navigate Down to access Brightness and navigate Right. • Navigate Up and Down to select the brightness of the screen from 1 ~ 5 • Press Play/OK to confirm. 1 • Press the Mode button to access the Main Menu.
3 • Navigate Right to enter the Language menu. • Navigate Up and Down to select your preferred language (select between English ,French , German , Italian , Japanese, Russian , Simplified Chinese , Spanish ,Dutch , and Danish ). • Press the Play/OK button to confirm your selection.The new setting will be effective immediately. 2 Navigate Down to To Delete . 3 • Navigate Right and select Not Allow or Allow . • Press Play/OK to confirm choice.
4 • Navigate Up and Down to adjust the hours. • Navigate Right to move to minutes. • Navigate Up and Down to adjust the minutes. • Press Play/OK to apply the settings and return to the previous screen. 2 Navigate Down to Auto Dim. Turning the Automatic start and finish On and Off 1 • Press the Mode button to access the Main Menu. • Navigate Up to Setup and press the Play/OK button. 3 • Navigate Right to select Time period. • Navigate Up or Down to select either Auto Dim Start or Auto Dim End.
3 • Navigate Right to select AutoDim Timer. • Navigate Up or Down to select either On or Off. • Press Play/OK to apply the settings. 6.10 Check the Status of your Photoframe You may check the status of your PhotoFramehow many more photos can be stored, which media are currently connected, and the PhotoFrame software version. 1 • Press the Mode button to access the Main Menu. • Navigate Down to highlight Setup and press Play/OK. Press the Mode button to leave this menu and play the slideshow.
Rotate Function (Auto Tilt) With this function your photos will automatically be properly positioned no matter whether you have the PhotoFrame positioned horizontally or vertically. 1 • Press the Mode button to access the Main Menu. • Navigate Down to highlight Setup and press Play/OK. 2 • Navigate Down to go to Auto tilt. • Navigate Right to go to On or Off. • Press Play/OK to confirm selection. 6.12 Beep On/Off ENGLISH 6.
6.13 Key Help When the PhotoFrame first starts a description of the control buttons is displayed for 15 seconds or until the press of any of the buttons. If you would like to turn this function off follow the instructions below. 1 • Press the Mode button to access the Main Menu. • Navigate Down to highlight Setup and press Play/OK. 2 • Navigate Down to go to Key Help. • Navigate Right to go to On or Off. • Navigate Down and press Play/OK to confirm the selection.
Technicaldata • Playback mode: Full screen browse, Slideshow , Thumbnail browse • Album management: Create, Delete, Edit, Rename • Photo edit: Copy, Delete, Rotate, Zoom and Crop, Move • Photo effects: Frames, Sepia • Slideshow setting: Collage, Random, Sequential,Transition effects • Screen background color: Black,White, Gray • Clock function: Set time and date, Clock and Storage Media Alarm,Auto dim on weekday/weekend • Memory Card Types: • Setup function: Brightness adjustment, SD/MMC/MMC+/xD/MS/CF type
8. Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control Digital PhotoFrame. Can I switch between different slideshows photos by using different memory cards? Yes. When a memory card is connected to the Digital PhotoFrame, it’ll slideshow photos stored on that specific card. Will the LCD screen be damaged if I keep showing the same photo for a long time? No.
Service and Warranty One Year Limited Warranty (for US and Canada only) Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for a period of one year from the date of purchase.This warranty extends only to the original purchaser of the product, and is not transferable.
Federal Communications Commission (FCC) Notice (U.S.Only) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Note: Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l’article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d’une installation résidentielle.
©200 8 Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
