Instructions / Assembly

10 InstantFit Ballast Compatibility Guide
1. System performance (Philips InstantFit LED T8 lamps and ballast) has been evaluated by the lamp and ballast manufacturer.
2. System performance (Philips InstantFit LED T8 lamps and ballast) has been evaluated by the lamp manufacturer only.
3. Typical application for U-Bent lamps is with 2-lamp ballasts.
4. Ballast tests are performed with a specic date code. Please contact the factory for date code information.
5. Connect BRN/BRN-W leads.
6. Please contact the emergency ballast manufacturer for wiring diagrams.
7. UL/CSA classied with the listed ballasts.
† This ballast is compatible for two (2) lamp horizontal conguration only.
*
Please contact Philips for questions about third party ballasts that are not on this list. Information in this document is subject
to change without prior notice
© 2017 Philips Lighting Holding B.V. All rights
reserved. Philips reserves the right to make changes in
specications and/or to discontinue any product at any time
without notice or obligation and will not be liable for any
consequences resulting from the use of this publication.
PLt-16118CR 01/17
Philips Lighting North America Corporation
200 Franklin Square Drive, Somerset, NJ 08873
Tel. [phone]
Imported by: Philips Lighting,
A division of Philips Electronics Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. [phone]