User guide

Feature Menu Controls (continued)
o
CHANNEL MEMORY
AUTO-PROGRAM.MING
A TOTE: If you went through First
1 V Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
Your TV can automatically set itself
for local area (or Cable TV) chan
nels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL A Y but
tons are pressed.
CBEGINJ
<1> Select CHANNEL MEMORY
(START AUTO-PROGRAM
MING) control.
With the FEATURES MENU on
screen, mov^the RED highlight with
the MENU <•! buttons. Then press
the MENU (M) button.
Press the MENU button to turn
AUTO-PROGRAMMING ON.
The TV shows which channel num
bers are "SAVED" (t>) as they are
added into memory.
"Auto-programming CHANNEL
MEMORY is finished" shows when
the TV is through adding channels.
<|> Press the STATUS or Menu (M)
button to clear the screen.
Smart Help
Try it out. Press the
_ CHANNELAT buttons and
see which channels you can select.
Remember. An Antenna or Cable TV
signal must first be connected to your
TV so that channels can be saved.
If you want to delete any unwanted
channels from the TV's memory, see
"ADD/DELETE CHANNELS" on
page 14.
AUTCM>flOGRAMMING
CHANNEL MEMORY
Channel Numbers are
Saved in Memory
1 2^
4v^
6v^ 8v^
10 11 12
13
14 15 16
17 1B 19 20
21 22
23
24
Press "M" to
13-1B7893 E001