Register your product and get support at www.philips.
1. What is in box 2 2. 2.1 2.2 Connect Attach the Stand Connect the power adaptor 3 3 3 3. 3.1 3.2 Setup Turn on the photo frame Chose Language 3 3 4 4. 4.1 4.2 4.3 4 4 5 5 4.6 4.7 Enjoy View pre-stored photos View photos from your memory card Copy or copy all photos from your memory card Delete or Delete all photos from your memory card Copy/ Delete photos by connecting to your computer Set Time and Date functions Set Auto on/off timer functions 5. Frequently asked questions 8 6.
Introduction Philips digital PhotoFrame can be placed either vertically or horizontally to fit the photos on display. Its internal rechargeable battery provides you with the freedom to pass it around and show photos without the power cord. Or, you can place it somewhere in a room for a continuous display by connecting it to the mains power supply. 1.
2. Connect 3. 2.1 Attach the Stand Locate the control keys Control keys on the back of the frame and corresponding function icons on the front of the LCD display enable you to maneuver through the menus and customize your settings. • Place the head of the stand in the socket. • Rotate counterclockwise until the stand clicks into place. Caution: To help prevent damage, do not hold the frame by the stand. Grasp the frame firmly using two hands. 2.
3.2 Choose language Menu buttons are on the back of the photo frame. Icons indicate location of buttons found on the back of the panel. • Press , keys to select SETTINGS. Press key to enter. • Press , keys to select Language settings. Press key to enter. • Press , keys to select. Press key to set your language. • Use key to return and exit SETTINGS. MainMenu OK PhotoFrame (front) Language Setting Up Down Right PhotoFrame (back) 4. Enjoy 4.
4.2 4.3 Copy or copy all photos from your memory card Copying photo mode , 1 • In the thumbnail mode, use keys to select photo. • Press key to add/cancel selected photos. After selecting, press key to show photo menu. View photos from your memory card Photo display (underside) Use left slot for Secure Digital/MMC/xD/Memory Stick card. Slide card with end first and face up. left slot right slot User right slot for Compact Flash card. Slide card with end first and face down.
4.4 Delete or Delete all photos from your memory card Deleting photo mode , 1 • In the thumbnail mode, use keys to select photo. • Press key to add/cancel selected photos. After selecting, press key to show photo menu. 4.5 Copy/ Delete photos by connecting to your computer You may copy, delete and move photos by connecting the photo framewith the computer through the provided USB cable. USB port , keys to select Delete or 2 Press Delete all from your memory card.
Set Time and Date functions Set Date functions • Press , keys to select SETTINGS. Press key to enter. • Press , keys to select Time and Date. Press key to enter. • Press , keys to select Date to setup. Press key to set year, month and day. Set Time functions • Press , keys to select SETTINGS. Press key to enter. • Press , keys to select Time and Date. Press key to enter. • Press , keys to select Time to setup. Press key to set hour and minutes. Press key to return main menu and exit SETTINGS.
, keys to select Set On/Off 2 Press to switch. Press key to set On or Off, and then press enter. 5. Frequently Asked Questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the keys in the back of the frame to control digital photo display. , 3 Press off time. keys to set auto on or auto After copying photos, how can I check to see if the photos are already stored inside? The photos are copied after the screen confirms with “Finished” message.
Service and Warranty One Year Limited Warranty (for US and Canada only) Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for a period of one year from the date of purchase. This warranty extends only to the original purchaser of the product, and is not transferable.
Banned Substance Declaration This product comply with RoHs and Philips BSD (AR17-G04-5010-010) requirements CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards • EN60950:2000 (Safety requirement of Information Technology Equipment) • EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Commission Federale de la Communication (FCC Declaration) Note: Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l’article 15 Des règles de la FCC.
North Europe Information (Nordic Countries) VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation Polish Center for Testing and Certification Notice • The equipment should draw power from a socket with an attached protection circuit(a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
ENGLISH Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative) Waste Electronics and Electrical Equipment (WEEE) This product is labelled with this symbol in accordance with European Directive 2002/96/ EG to indicate that it must not be disposed of with your other household waste. Please check your local city office or waste disposal service for the return and recycling of this product.
©2007 Koninklijke Philips N.V. All rights reserved.
