User guide

M-FLASH SETUP

M-Flash funcion allows you to flash BIOS from USB drive/ storage drive (FAT/ FAT32

format only), or allows the system to boot from the BIOS file inside USB drive (FAT/

FAT32 format only). To use M-Flash, first boot/reboot the computer and the system will

start POST (Power On Self Test) process. When the message below appears on the

screen, press <DEL> key to enter BIOS.

Press DEL to enter SETUP

Select M-Flash in BIOS main menu and press <ENTER> key to enter M-Flash menu

and the following menu appears.

H-Flash

= BIOS Update or Boot 2nd BIOS Fron USB driue ==

tl-Flash function as [Disabled]

===== Backup BIOS to USB driue =====

Sage File to Selected Deuice [USB:USB FD1

Saue File Name as

Sage Extend File nai

Start to saue file

[BIOS!

11131

[Press Enter]

(BIOS Update]: Update

BIOS RUtl Chip data

fro* selected file.

[Boot]: After

allocated BIOS file.

Systen uill boot fron

this BIOS uhich stored

at USB Drige.

Ti«"»:Moge Enter:Select »/-/:Ualue F10:Sage ESC:Exit Fl:Genera] Help

F4:CPU Spec F5:Hetnory-Z F8:Fail-Safe Defaults F6Optimized Defaults

Please refer to the instructions below to setup.

== BIOS Update or Load BIOS From USB drive==

M П—h function as

[Disabled] Disable M-Flash function.

[BIOS Update] Flash BIOS via the USB/ Storage drive directly. Update BIOS

ROM chip data from selected file, which is download from offi-

cial website and must be saved in the root directory of the USB/

Storage drive. It only supports particular file name, which is the

official BIOS file name from us.

[Boot] After allocated particular BIOS file, system will boot from this

BIOS file which saved in the root directory of USB drive. System

will skip MB ROM chip data and boot with thisparticular BIOS

inside USB drive.Note: this option is for USB drive only.

G52-XXXX22B-Q13