Register your product and get support at OLED973 series www.philips.
Contents 1 What's new 9.6 Storage 4 10 Internet 1.1 Home and channels 4 1.2 Apps and Philips TV Collection 2 Setting Up 4 11 TV Menu 2.1 Read Safety 5 2.2 TV Stand and Wall Mounting 2.3 Tips on Placement 5 2.4 Power Cable 5 2.5 Antenna Cable 5 5 8 13 Networks 13.1 Network 13.2 Bluetooth 14 Settings 11 12 5.1 Install Channels 12 5.2 Channel Lists 12 5.3 Channel List sorting 12 5.4 Watching channels 13 5.5 Favourite Channels 15 5.6 Text / Teletext 16 5.7 Interactive TV 17 6.
21.1 About Top Picks 70 21.2 Now on TV 70 21.3 TV on Demand 70 21.4 Video on Demand 71 22 Netflix 23 Alexa 72 73 73 73 23.1 About Alexa 23.2 Using Alexa 24 Software 74 24.1 Update Software 74 24.2 Software Version 74 24.3 Automatic Software Update 24.4 Open Source Software 75 24.5 Open Source License 75 24.6 Announcements 75 25 Specifications 74 76 25.1 Environmental 76 25.2 Power 76 25.3 Operating System 76 25.4 Reception 76 25.5 Display Type 77 25.6 Display Input Resolution 25.
1 1.2 What's new Apps and Philips TV Collection 1.1 Home and channels Favourite Apps on the first row You can find more apps in the Apps page which can be opened by clicking the Apps icon at the left end of the Apps row. You can also add more apps as favourite from the Apps page. The new Home launcher Press HOME on your remote control to get your new Android Home screen. From here you can decide what to watch by browsing entertainment options from app and live TV.
TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting Up 2.1 2.3 Read Safety Tips on Placement Read the safety instructions first before you use the TV. • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect. • The ideal distance to watch TV is 2 to 5 times its diagonal screen size.
2.5 Antenna Cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals.
3 Middle Remote Control 3.1 Key Overview Top 1 - OK key To confirm a selection or setting. 2 - Arrow / navigation keys To navigate up, down, left or right. 3 - BACK To switch back to the previous channel you selected. To return to previous menu. To go back to the previous App/Internet page. 1 - Standby / On To switch the TV on or back to Standby. 4 - OPTIONS To open or close the Options menu. 2 - AMBILIGHT To select one of the Ambilight style. 5 - HOME To open the Home menu.
5 - Playback and Record • Play , to playback. • Pause , to pause playback • Stop , to stop playback • Rewind , to rewind • Fast forward , to go fast forward • Record , to start recording 4 - Navigation Pad - arrow / navigation • To navigate up, down, left or right. • During broadcast, swipe up/down to switch channels. 5 - Navigation Pad - OK To confirm a selection or setting. 6 - BACK • To switch back to the previous channel you selected. • To return to previous menu.
Voice Search You can search for videos, music or anything else on the Internet by simply using your voice. You can speak into the microphone on the remote control. You need to pair the remote control to the TV before use voice search. To use Voice... 1 - Press VOICE on remote control, the blue light on the remote control lights up and the search field opens, the microphone is active. 2 - Speak out what you are looking for with clear pronunciation.
3.6 Cleaning Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
4 4.2 Switching On and Off Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… 4.1 1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. Select Demo, to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel.
1 - With a channel list open on screen, press OPTIONS. 2 - Select Select Channel List and press OK. 3 - In the list menu, select one of the available channel lists and press OK. 5 Channels 5.1 Alternatively, you can select the list name at the top of the channel list and press OK to open the list menu. Install Channels For more information, in Help, press the colour key Keywords and look up Channel, Antenna Installation or Channel, Installation. Search for a Channel 5.
7 - Press (left) to go back one step or press close the menu. to If you lock or unlock channels in a channel list, you only have to enter the PIN code just once until you close the channel list. For more information, in Help, press the colour key Keywords and look up Child Lock for more information. 5.4 Watching channels Tune to a Channel Parental Rating To start watching TV channels, press . The TV tunes to the channel you last watched.
Switch On Select a Subtitle Language Digital broadcasts can have subtitles for their programmes. If none of the preferred subtitle languages are available, you can select another subtitle language if available. If no subtitle languages are available, you cannot select this option. To show the subtitles… Press OPTIONS and select Subtitles. You can switch subtitles On or you can select Automatic. To select a subtitle language when none of your preferred languages are available… Off.
4 - Select the appropriate Common Interface slot and press (right). 5 - Select the TV operator of the CAM and press OK. The following screens come from the TV operator. 3 - In the Favourites List, select the channel you want to reorder and press OK. 4 - With the (up) or (down) keys move the channel where you want it. 5 - Press OK to confirm the new location. 6 - You can reorder channels with the same method until you close the Favourites List with the BACK key.
4 - With the (up) or (down) keys move the channel where you want it. 5 - Press OK to confirm the new location. 6 - You can reorder channels with the same method until you close the Favourites List with the BACK key. Add a Range of Channels To add a consecutive range of channels to a Favourites List in one go, you can use Select Range. To add a range of channels… 1 - Open the Favourites List where you want to add a range of channels. 2 - Press OPTIONS, select Select Range and press OK.
You can select a word and scan Text for all occurences of this word. graphics. 1 - Open a Text page and press OK. 2 - Select a word or number with the arrow keys. 3 - Press OK again to jump immediately to the next occurence of this word or number. 4 - Press OK again to jump to the subsequent occurence. 5 - To stop searching, press (up) until nothing is selected. Text Setup Text language Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language .
What You Need Interactive TV is only available on digital TV channels. To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the TV. HbbTV If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages. Settings > General settings > Advanced > HbbTV settings > HbbTV > On.
select Install. 8 - If a satellite offers Channel Packages, the TV will show the available packages for that satellite. Select the package you need. Some packages offer a Quick or Full install for their available channels, select one or the other. The TV will install the satellite channels and radio stations. 9 - To store the satellite setup and installed channels and radio stations, select Finish. 6 Channel Installation 6.
Channel Packages User Band Frequency Satellite operators can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country. Some satellites offer subscription packages - a collection of channels you pay for. Next to the unique user band number, the built-in satellite receiver needs the frequency of the selected user band number. These frequencies are mostly shown next to the user band number on a Unicable switchbox.
channels and radio stations. Homing Transponder and LNB You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite. In some countries, you can adjust the expert settings for homing transponder and each LNB. Only use or change these settings when a normal installation fails. If you have non-standard satellite equipment, you can use these settings to overrule the standard settings.
the channel package. Manual Channel Update I cannot remove a satellite You can always start an channel update yourself. • Subscription packages do not allow removing a satellite. To remove the satellite, you have to do a complete installation again and select another package. To start a channel update manually… 1 - Select Settings > Channels > Antenna/Cable Installation or Antenna Installation and press OK. 2 - Enter your PIN code if necessary. 3 - Select Search for Channels and press OK.
2 - Enter your PIN code if necessary. 3 - Select Yes and press OK to confirm. 4 - The TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minutes. 5 - Press (left) to go back one step or press BACK to close the menu. Frequency Scan Select the method of searching for channels. You can select the faster Quick Scan method and use the predefined settings used by most cable operator in your country.
3 - Select Digital: Reception Test and press OK. 4 - Select Search and press OK. The digital frequency is shown for this channel. 5 - Select Search again and press OK to check the signal quality of this frequency. The test result is shown on screen. You can reposition the antenna or check the connections to possibly improve the reception. 6 - You can also change the frequency yourself. Select the frequency number one by one and use the (up) or (down) keys to change the value.
Channel List Version Check the current version of the channel list... 1 - Select Settings > Channels and press (right) to enter the menu. 2 - Select Channel List Copy and select Current Version, then press OK. 3 - Press (left) repeatedly if necessary, to close the menu. Upload a Channel List To not Installed TVs Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
7 HDMI ARC Connect Devices All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). 7.1 If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
HDMI CEC - EasyLink An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m. Smart Card Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control.
a disc player to match the sound with the video. Passwords and PIN codes For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV. Problems with HTS sound Sound with loud noise To set the PIN code for the CAM… If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
DVD Player 5 - Select the type of device and press OK. 6 - Press (left) repeatedly if necessary, to close the menu. Use an HDMI cable to connect the DVD player to the TV. * Your TV doesn't support Bluetooth subwoofer/speakers/headphones. If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control. ** HDMI connection is required for sound bar, speaker and other audio device. 7.
7.10 USB Hard Drive What You Need If you connect a USB Hard Drive, you can pause or record digital TV broadcasts (DVB broadcasts or similar). Minimum Disk Space • To Pause To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 4GB disk space. • To Record To pause and record a broadcast, you need a minimum of 250GB disk space. 7.
TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. Configure Install the keyboard To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV.
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press SOURCES and select USB. For more information on viewing photos, in Help, press the colour key Keywords and look up Photos, Videos and Music. To stop watching the USB flash drive content, press EXIT or select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime. 7.
1 - Go to the router, press the WPS button and return to the TV within 2 minutes. 2 - Select Connect to make the connection. 3 - A message will be shown when the connection is successful. 8 Connect your Android TV 8.1 Make the Connection - WPS with PIN Code Network and Internet Settings > Wireless and Networks > Wired or WiFi > Connect to Network > WPS with PIN Code. Home Network If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks.
What You Need Network Configuration - Static IP Configuration To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet. Settings > Wireless and Networks > Wired or WiFi > Network Configuration > Static IP Configuration. 1 - Select Static IP Configuration and configure the connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2.
Settings > Wireless and Networks > Wired or WiFi > Clear Internet Memory. information on these settings. To open these settings… With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips TV Collection favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared. 1 - Select Settings > Android Settings, and press OK.
The installed app found in the Apps page, which can be opened from the Android Home screen by pressing the Apps icon at the left end of the Apps row. YouTube channel This channel contains your Recommended, Subscriptions or Trending YouTube videos. Customize channels Click the CUSTOMIZE CHANNELS button to add and remove channels from your Home screen. Terms of Use See also www.support.google.com/androidtv To install and use the Philips TV Collection apps, you must agree to the Terms of Use.
via the Apps page or by the Add app to favourites item on the Apps row. Some Google Play products and features aren't available in all countries. 9 Apps Find more information on support.google.com/androidtv 9.1 About Apps You can find your favourite Apps on Home menu. Music Apps row in the With Google Play Music, you can play your favourite music on TV. Like apps on your smartphone or tablet, the apps on your TV offer specific functions for an enriched TV experience.
2 - Select Google Play Games. 3 - Select a game to play or select a new game to install and press OK. 4 - When done, press BACK repeatedly or press EXIT or stop the app with its dedicated exit/stop button. Payments To make a payment on Google Play on TV, you must add a form of payment - a credit card (outside the United States) - to your Google Account. When you purchase a movie or TV show, you will be charged on this credit card.
according to users/buyers maturity. You need to enter a PIN code to select or change the level of maturity. The level of maturity will determine which apps are available for instalation. 2 - Press (down) and select Device Preferences > Security & restrictions and press OK. 3 - Select Restricted Profile and press OK. 4 - Select Settings and press OK. 5 - Enter a PIN code with the remote control. 6 - Select Allowed apps and press OK.
are not using anymore. 9.6 Storage You can see how much storage space - the internal TV memory - you are using for your apps, videos, music, etc. You can see how much free space you still have available for installing new apps. Check your storage if apps start to run slow or in case of app trouble. To see how much storage you are using… 1 - Select Settings > Android Settings and press OK. 2 - Select Device > Storage & reset and press OK. 3 - View the storage usage of the TV memory.
10 Internet 10.1 Start Internet You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen. • Some plug-ins (e.g. to view pages or videos) are not available on your TV. • You cannot send or download files. • Internet pages are shown one page at a time and full screen. To start the Internet browser… 1234- Press HOME. Select Apps > Internet Browser and press OK. Enter an Internet address and select to confirm.
11 TV Menu 11.1 About TV Menu If the TV cannot be connected with the Internet, you can use the TV Menu as your Home menu. In the TV Menu, you will find every TV function. 11.2 Open TV Menu To open TV Menu and open an item… 1 - Press to open TV Menu. 2 - Select an item and press OK to open or start it. 3 - Press BACK to close TV Menu without starting anything.
12 12.3 Sources Device Name and Type When you connect a new device to the TV and the TV detects the device, you can assign an icon that fits the device type. If you connect a device with an HDMI cable and HDMI CEC, the TV detects the device type automatically and the device gets an appropriate icon. 12.1 Switch to a device From the list of Sources, you can switch to any of the connected devices.
13 Networks 13.1 Network For more information, in Help, press the colour key Keywords and look up Network, for more information on connecting the TV to a network. 13.2 Bluetooth Pairing a Device For more information, in Help, press the colour key Keywords and look up Bluetooth, Pairing for more information on pairing wireless devices.
14 Colour, Contrast, Sharpness, Brightness Settings Adjust the picture colour Settings > Picture > Colour. 14.1 Press the arrows (up) or (down) to adjust the colour saturation value of the picture. Picture Picture Settings Adjust the picture contrast Picture Style Settings > Picture > Contrast. Select a style Press the arrows (up) or (down) to adjust the contrast value of the picture. Settings > All settings > Picture > Picture style.
Select Normal or Wide to set the type of colour gamut. Settings > Picture > Advanced > Colour > RGB only mode. Select Red, Green, or Blue to switch picture as selected colour only, or select Off to turn off RGB mode. Select the preset colour temperature Settings > All settings > Picture > Advanced > Colour > Colour temperature. Select Normal, Warm, or Cool to set the colour temperature for your preference.
Settings > All settings > Picture > Advanced > Contrast > HDR Perfect. Picture Clean Noise reduction Select HDR Perfect for superior contrast and brightness effect. Settings > Picture > Advanced > Picture clean > Noise reduction. Note: Available when HDR (High-Dynamic Range) signal is detected. Select Maximum, Medium, or Minimum to set the level for removing the noise in video content. Noise is mostly visible as small moving dots in onscreen picture.
Settings > Picture > Advanced > Motion > Perfect Clear Motion. might take more than 1 hour. If you turn the TV on during the process, it will be stopped and will be restarted automatically when the TV switches to standby at a later time. While processing, a white line may appear on the screen. This is normal when clearing on-screen image retention. Perfect Clear Motion makes any movement smooth and fluent.
Equalizer Quick Picture Setting Settings > All settings > Sound > Expert mode settings > Equalizer. During the first installation, you did some picture settings in a few easy steps. You can redo these steps with Quick Picture Setting. To do these steps, make sure the TV can tune to a TV channel or can show a programme from a connected device. Press the arrows (up) or (down) to adjust the level of Equalizer.
You can select where you want to hear the TV sound and how you want to control it. • If you select TV speakers off, you permanently switch off the TV speakers. • If you select TV speakers, the TV speakers are always on. adjust the audio sync delay to synchronise the audio to the video. Select Off if a sound delay is set on your Home Theatre System. With an audio device connected with HDMI CEC, select HDMI sound system. The TV will switch off the TV speakers when the device is playing the sound.
• Lumina - Mixes audio dynamics with video colours • Colora - Based on audio dynamics • Retro - Based on audio dynamics • Spectrum - Based on audio dynamics • Scanner - Based on audio dynamics • Rhytm - Based on audio dynamics • Party - A mix of all Follow Audio styles, one after the other Ambilight + Hue Configure Settings > Ambilight > Ambilight+hue > Configure. Setup your Philips Hue bulbs to follow the colours of Ambilight.
Set TV switch off timer Advanced Ambilight Settings Settings > Eco settings > Switch off timer. Neutralise the influence of a coloured wall on the Press the arrows (up) or (down) to adjust the value. The value 0 (Off) deactivates the automatic switch off. Ambilight colours Settings > Ambilight > Advanced > Wall colour. Select Switch off timer, the TV switches off automatically to save energy.
USB Keyboard Settings EasyLink - HDMI CEC Set the keyboard layout for installed USB keyboard Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control. Settings > General settings > USB keyboard settings. EasyLink HDMI CEC must be switched on on the TV and the connected device. Connect the USB keyboard to one of the USB connections on this TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection.
• Resolution: 3840 x 2160 • Frame rate (Hz): 50Hz, 59.94Hz, 60Hz • Video data sub-sampling (bit-depth) - 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB 4:4:4* - 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2* - 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2* * Supported only when HDMI Ultra HD is set to Optimal. 14.6 Clock, Region, and Language Settings Language Settings > Region and language > Language. Select Standard or Off if the picture or sound are distorted.
• The standard setting for the TV clock is Automatic. The time information comes from the broadcasted UTC - Coordinated Universal Time information. • If the clock is not correct, you can set the TV clock to Country dependent. Universal access for hearing impaired people Settings > All settings > Universal access > Hearing impaired > On. • Some digital TV channels broadcast special audio and subtitles adapted for the hard of hearing or deaf people.
Lock for App Set lock on Philips apps Settings > Child lock > App lock. You can lock apps unsuited for children. You can lock 18+ rated apps from the Philips apps or set up a restricted profile in the Home menu. 18+ The 18+ app lock will ask for a PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps from the Philips apps. Restricted profile You can set up a restructed profile for the Home menu where only the apps you allow are available.
15 15.3 Videos, Photos and Music Most Popular Menu and Last Played Menu View most popular files or clear the list 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and select Most popular. 3 - Select one of the file and press OK to view files or press Clear all to clear the list. 15.1 From a Computer or NAS You can view your photos or play your music and videos from a computer or a NAS (Network Attached Storage) in your home network.
15.5 Video Options Play your Videos Browse video files... Play Videos • List/Thumbnails – List or thumbnails views • Shuffle – Play your files in a random order • Repeat – Plays all videos in this folder once or continuously Open video folder 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and press (right) to select the USB device you need. 3 - Select Videos, you can press Mark favourite to add the video folder to favourite menu - Favourites.
View a 360 photo 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and press (right) to select the USB device you need. 3 - Select 360 Photos and select one of photos, you can press Play All to play all files in the folder or press Mark favourite to add the selected photo to favourite menu - Favourites.
- 360 Photo Options Browse 360 photo files...
to From the Internet automatically. To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. 16 TV Guide 16.1 What You Need 16.3 Using the TV Guide With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV Guide information.
To clear a reminder… Set a Recording 1 - Press TV GUIDE and select a programme with the reminder. 2 - Press the colour key Clear Reminder and press OK. 3 - Press BACK to close the menu. You can set a recording in the TV Guide*. To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name.
17 Schedule a Recording Recording and Pause TV You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme… 17.1 1 - Press TV GUIDE. 2 - On the TV Guide, select the channel and programme you wish to record. Press (right) or (left) to scroll through the programmes of a channel. Use the colour key Day to select the day you need.
or both scheduled recordings. recordings and reminders. To adjust the start or end time of a scheduled recording… Watch a Recording 1 - Press TV GUIDE. 2 - Press the colour key Recordings . 3 - At the top of the screen, select Scheduled and press OK. 4 - In the list of scheduled recordings and reminders, select the tab Recordings and press OK to view the scheduled recordings only.
press (Stop). Replay Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. To replay a current broadcast… 1 - Press (Pause) 2 - Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed. At one point you will reach the start of the broadcast storage or the maximum time span. 3 - Press (Play) to watch the broadcast again.
18 Cast to Your TV Smartphones and Tablets To cast an app to the TV screen… Philips TV Remote App 1 - On your smartphone or tablet, open an app that supports Google Cast. 2 - Tab the Google Cast icon. 3 - Select the TV you would like to cast to. 4 - Press play on your smartphone or tablet. What you selected should start playing on TV. The new Philips TV Remote App on your smartphone or tablet is your new TV buddy. 18.3 18.1 With the TV Remote App, you master your media around you.
19 Games 19.1 What You Need On this TV, you can play games… • from the Philips TV Collection in the Home menu • from the Google Play Store in the Home menu • from a connected Game Console Games from the Philips TV Collection or the Google Play Store must be downloaded and installed on TV before you can play them. Some games need a gamepad to play. To install game apps from the Philips TV Collection or the Google Play Store, the TV must be connected to the Internet.
• Rhytm - Based on audio dynamics • Party - A mix of all Follow Audio styles, one after the other 20 Ambilight 20.1 Follow Colour Ambilight Style You can set Ambilight to follow the video or the audio dynamics of a TV programme. Alternatively, you can set Ambilight to show a preset colour style or you can switch Ambilight off. Follow Video You can set Ambilight to follow the video or the audio dynamics of a TV programme.
20.3 Ambilight Settings For more information, in Help, press the colour key Keywords and look up Ambilight, Settings for more information. 20.4 Lounge Light Mode The lounge light mode of your TV allows you to switch on the Ambilight when the TV is in standby. So you can light up your room with Ambilight. After you have switched your TV to standby and wish to switch on the Ambilight lounge light, follow these steps: 1 - Press AMBILIGHT.
accepted already when you connected to the Internet.). 21 Top Picks The icon will only appear at the top of the screen when Now on TV is available. 21.1 The TV does not store former recommendations. About Top Picks With Top Picks your TV recommends… Using Now on TV • current TV programmes in Now on TV • online TV services (Catch Up TV) in TV on Demand • the latest rental videos in Video on Demand To open Now on TV… 1 - Press to open Quick Menu.
Using TV on Demand You can select a specific video store if more than one is available. To open TV on Demand… To rent a movie… 1 - Press to open Quick Menu. 2 - Select Top Picks to open the Top Picks menu. 3 - Select TV on Demand at the top of the screen and press OK. 4 - Press (down) to open the page full screen. 5 - You can select a specific broadcaster if more than one is available. 6 - Select a programme icon and press OK to start watching. 7 - Press BACK to close.
22 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. In your region, Netflix might only come available with future software updates. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
3 - Follow the instructions on screen to accept Privacy Policy terms, name your TV and sign in your Google account. The Google account is needed to pair with Alexa device. 4 - On your mobile device, sign in with the same Google account in the Amazon Alexa companion app. 5 - Complete following steps in the Amazon Alexa companion app. The first is to enable "Philips Smart TV Voice Control" skill. The second is to link your Google account and then the final is to discover devices.
1 - Insert the USB flash drive into your computer. 2 - On the USB flash drive, locate the file update.htm and double click it. 3 - Click Send ID. 4 - If new software is available, download the .zip file. 5 - After the download, unzip the file and copy the file autorun.upg onto the USB flash drive. Do not place this file in a folder. 24 Software 24.1 Update Software Update from Internet Update the TV software 1 - Insert the USB flash drive into the TV again. The update starts automatically.
INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS SOFTWARE. TP Vision Netherlands B.V. offers no support for this software. The preceding does not affect your warranties and statutory rights regarding any TP Vision Netherlands B.V. product(s) you purchased. It only applies to this source code made available to you. 24.3 Automatic Software Update To switch on Automatic software update to update your TV software automatically. Leave the TV in standby.
25 Specifications 25.1 Please inform yourself about the local separate collection system for electrical and electronic products. Environmental Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. European Energy Label The European Energy Label informs you on the energy efficiency class of this product.
• 800 x 600p - 60 Hz • 1024 x 768p - 60 Hz • 1280 x 1024p - 60 Hz • 1920 x 1080p - 60 Hz • 3840 x 2160p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz 25.
Playback formats • Containers: PS, TS, M2TS, TTS, AVCHD, MP4, M4V, MKV, ASF, AVI, 3GP, Quicktime • Video Codecs : AVI, MKV, HEVC, H264/MPEG-4 AVC, MPEG-1, MPEG-2, MPEG-4, VP9 • Audio Codecs : AAC, MP3, WAV, WMA (v2 up to v9.
• Check the TV - You can check if the picture, sound, Ambilight are working fine. • Check the network - Check the network connection. • Update software - Check available software updates. • User manual - Read the user manual for TV information. • Troubleshooting - Find a solution for frequent ask questions. • Factory settings - Reset all settings to factory settings. • Reinstall TV - Reinstall and redo the complete TV installation.
and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or on the TV. screen for a while. To allow OLED TV to perform refreshing properly, please adhere to the following: • For normal refreshing process to take place automatically, always use remote control to switch off TV and keep the TV power plugged. • When normal refreshing message is shown on TV screen, follow the onscreen recommended instructions.
option (see TV picture settings). • Always watch video in full screen instead of a small window on TV screen. (e.g. video in internet browser page) • Do not attach any sticker or label on the OLED panel to reduce the chance of image residual phenomenon. Philips TV is equipped with the following to take care Make sure that Location is set to Home. Picture does not fit the screen • Change to a different picture format. • Change Picture format to Original.
correct. • If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable, make sure that an additional audio cable is connected to AUDIO IN (mini-jack only), if available. Wrong Menu Language Wrong menu language Change the language back to your language. HDMI EasyLink does not work • Make sure that your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible. 1 - Press HOME to go to Home screen .
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 27 Safety and Care 27.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 27.2 Screen Care • Never touch, push, rub or strike the screen with any object.
black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. 28 Terms of Use 28.1 CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design) and 2011/65/EC (RoHS). Terms of Use - TV 2018 © TP Vision Europe B.V.
29 29.4 Copyrights DTS-HD Premium Sound ™ DTS-HD Premium Sound ™ 29.1 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Premium Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. MHL MHL MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. 29.2 29.
29.7 Other Trademarks All other registered and unregistered trademarks are the property of their respective owners.
30 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index Disposal of TV or batteries 76 DVB (Digital Video Broadcast) 23 A Age Rating 13 Alexa 73 Ambilight+hue, configuration 51 Ambilight+hue, Immersion 51 Ambilight+hue, on or off 51 Ambilight, Ambilight Style 68 Ambilight, Settings 50 Android Settings 35 Announcements 75 Antenna, Manual Installation 24 APP lock 38 Apps 37 Audio Language 14 Audio Language, Primary 14 Audio Language, Secondary 14 Auto Volume Levelling 49 Automatic Channel Update 22 E EasyLink HDMI CEC 53 Eco Settings 52 End of use 76 Europ
TV Installation 22 TV on Demand 70 TV placement 5 P Parental Rating 13 Partially sighted 55 Pause TV 63 Photos, Videos and Music 57 Picture Style 45 Picture style setting 45 Picture, picture format 48 Picture, quick settings 49 Power connection 5 Power consumption check 52 Problems, Channels 80 Problems, Connection, Internet 82 Problems, Connection, Wi-Fi 82 Problems, HDMI Connection 81 Problems, Picture 81 Problems, Remote control 79 Problems, Sound 81 Problems, USB Connection 81 Problems, Wrong menu lang
Powered by TCPDF (www.tcpdf.
