Register your product and get support at OLED754 series www.philips.
Contents 1 Get Support 13.1 Home Network 46 13.2 Connect to Network 46 13.3 Wireless and Network Settings 4 1.1 Identify and Register your TV 4 1.2 TV Help and User Manual 4 1.3 On-line Help and User Manual 4 1.4 Consumer Care / Repair 4 2 Software 14 Smart TV 6 6 2.1 Update Software 2.2 Software Version 3 Quick Guide 7 16 Ambilight 8 10 17 Netflix 7 Channels 55 19 Amazon Prime Video 5.1 Connectivity guide 12 5.2 Antenna 12 5.3 Satellite 12 5.4 Video Device 12 5.5 Audio Device 13 5.
27.2 27.3 27.4 27.5 27.6 Dolby Audio 70 Dolby Vision and Dolby Atmos DTS-HD (italics) 70 Wi-Fi Alliance 70 Other Trademarks 70 28 Open Source 70 71 28.1 Open Source Software 28.
* Ambilight setting is only for models which support Ambilight function. 1 Get Support 1.3 1.1 On-line Help and User Manual Identify and Register your TV Identify your TV - TV model number and serial number To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. You might be asked to provide the TV product model number and serial number.
Do not attemp to repair the TV yourself. This may cause severe injury, irrepairable damage to your TV or void your warranty.
2 back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 2.1 Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1 - Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2 - VOICE microphone Speak near this hole during voice search. 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 Alkaline type AAA-LR03-1.
4 - Colour keys Direct selection of options. Blue key , opens Help. Bottom (for UK models) 5 - Arrow / navigation keys To navigate up, down, left or right. 6 - Home To open the Home menu. 7 - OPTIONS To open or close the Options menu. Bottom 1- To open the Netflix App directly. With the TV switched on or from standby. • If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet.
most operations. • To use Alexa voice control operations, you need to pair (link) the TV with the remote control. When you started the initial TV installation, the TV invited you to long press the PAIR key, and by doing so, the pairing was done. Note: 1 - Once the remote control has entered pairing mode successfully, the blue LED indicator ring around the microphone on the front side of the remote control starts blinking.
4 Wall Mounting Setting Up Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . 4.1 Read Safety Read the safety instructions first before you use the TV. To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. 4.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key on the back of the TV. Switch to standby To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.
with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection. Composite This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
1 - Activate Miracast (Screen mirroring) on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or from the mobile device. From the device With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV.
Reset Wi-Fi Miracast connections All previously connected devices are stored in the WiFi Miracast list of connections. To clear all connected Miracast devices… (Home) > Settings > All settings > Network > Reset Wi-Fi Miracast connections. Smart Card Screen Delay Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. The normal delay when sharing a screen with Miracast is about 1 second.
using to unlock the TV. To pause and record a broadcast, you need a minimum of 250GB disk space. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. To set the PIN code for the CAM… 1. Press SOURCES . 2. Select the channel type you are using the CAM for. 3. Press OPTIONS and select Common Interface. 4. Select the TV operator of the CAM.
the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting. 2 - Switch on the USB Hard Drive and the TV.
6 Switch Source 6.1 Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press OPTIONS and select Device info. • To close the source menu without switching to a device, press SOURCES again. 6.2 Rename Device • Only CVBS, YPbPr, HDMI sources can be renamed or replace device icon.
for channels 7 Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. This can take a few minutes. 7.1 About Channels and Switch Channels Quick reinstall (Home) > Settings > Install Channels > Antenna/cable installlation > for channels To watch TV channels • Press . The TV tunes to the TV channel you last watched. • Press (Home) > TV > Channels and press OK. • Press + or - to switch channels.
frequency value to search for channels, select Advanced. the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. Frequency step size The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz.
• Fine tune To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. automatically. • Up to 4 Satellites - You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation. • Unicable - You can use a Unicable system to connect the antenna dish to the TV.
(Home) > Settings > Install Channels > Satellite installlation > satellite > Remove satellite Manual Installation Search for (Home) > Settings > Install Channels > Satellite installlation > installtion You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite. Manually install satellite. • LNB - Select the LNB for which you want to add new channels.
Channel List copy To Installed TVs Introduction Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. Channel list copy is intended for dealers and expert users. To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, see chapter Re-install channels. Start this procedure until you reach the country setting. Press BACK to cancel the installation.) If the country is correct continue with step 2.
language (the language set on TV), the TV can show subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages must also be part of the broadcast. Channel info Select Channel info to view the technical information of the channel. You can select your preferred subtitle languages in Subtitle language. HbbTV on This Channel If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only.
Select Channel Range Channel List Options > OK > OPTIONS > Open Option Menu Select a range of channels in a favourites channel list, once completed, press OK. To open the channel list option menu... • Press , to switch to TV. • Press OK to open the current channel list. • Press OPTIONS , and select one of options. • Press BACK to close the channel list. Select Channel List > OK > OPTIONS > 1 - Press , to switch to TV.
With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default list will be appended after your favourite channels for your preview. You need to add these channels into your favourite list to enable its operation (refer to "TV Guide" chapter). 7.
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV. In that case, the set-top box’s teletext can be used instead.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press TV GUIDE and select the programme set for recording. 2 - Press the colour key Clear recording . To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name.
9 Freeview Play 9.1 About Freeview Play To enjoy Freeview Play*, you need to connect your TV to Internet first. Freeview Play offers: • Watch TV programmes you missed from the last seven days. • Watch live TV and on demand, all in one place without entering an app, you can search Freeview Play programmes in TV Guide. • Watch over 70 standard channels and upto 15 HD channels. • Enjoy on demand services like BBC iPlayer, the ITV Hub, All 4, Demand 5, BBC NEWS and BBC SPORT.
10 To record a programme… Recording and Pause TV 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel. 3 - With the programme highlighted, press the colour key Record . The programme is scheduled for recording. A warning will show automatically when overlapping recordings are scheduled.
8 - Select Schedule and press manual recording. OK to schedule the Replay The recording will appear in the list of scheduled recordings and reminders. Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. To replay a current broadcast… Watch a Recording 1 - Press (Pause) 2 - Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed.
11 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. 11.1 From a USB Connection Repeat, Play once View the pictures repeatedly or once only. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Stop music Stop the music if the music playback is in progress.
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails View 360 photos with list view or thumbnails view. List/Thumbnails View video files with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. Subtitles Display the subtitles if available, select On, Off, or On during mute. Repeat, Play once View the pictures repeatedly or once only.
ideal sound settings. • Audio out - Set the TV to play the sound on TV or on the connected audio system. • Ambilight style* - Select one of preset Ambilight styles. • Ambilight+hue* - Switch Ambilight+hue on or off. • Sleep timer - Set the TV to switch to standby automatically after a preset time. • Screen off - If you only listen to music on TV, you can switch off the TV screen. 12 Open TV Setting Menus 12.1 Home Menu Overview Press (Home) to select one of below menus, then press OK.
not supported in Monitor mode. The TV is able to play HDR video in Monitor mode but no HDR processing will be applied. (Home) > Settings > All settings > Picture > Contrast Press the arrows (up) or (down) to adjust the contrast value of the picture. Custom a style You can adjust and stored picture settings in in the currently selected picture style, like Colour, Contrast or Sharpness. You can decrease contrast value to reduce power consumption.
settings > Colour temperature Perfect Select Normal, Warm, or Cool to set the colour temperature for your preference. Set HDR Perfect to Off, Minimum, Medium, Maximum or Automatic to set the level at which the TV automatically shows superior contrast and brightness effect for HDR content. For HDR10+ content, it is highly recommended to set HDR Perfect to Automatic to have the best HDR effect.
of Light Sensor when it is active. • (Home) > Settings > All settings > Picture style > Monitor. To save energy, the built-in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. The built-in light sensor automatically adjusts the picture to the lighting conditions of the room. Natural Motion (Home) > Settings > All settings > Picture > Expert mode settings > Natural Motion Natural Motion makes any movement smooth and fluent.
change. • Fill screen – automatically enlarges the picture to fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some extreme picture formats can still show black bars. Picture content aspect ratio may change. • Fit to screen – automatically zooms in the picture to fill the screen without distortion. Black bars may be visible. Not supported for PC input. The available sound styles are ...
press Volume and press the arrows (right) or (left) to select the output source you want to adjust. Press the arrows (up) or (down) to adjust the volume. TV Placement (Home) > Settings > All settings > Sound > TV placement With an audio device connected with HDMI CEC, select HDMI sound system. The TV will switch off the TV speakers when the device is playing the sound. Select On a TV stand or On the wall to have best sound reproduction according to the setting.
CAM Operator Profile Digital out offset (Only available when Digital out (Home) > Settings > All Settings > Channels > CAM Operator Profile delay set to On) (Home) > Settings > All settings > Sound > Advanced > To switch on operator profile for CI+/CAM for easy channel installation and updates. Digital out offset • If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound.
(Home) > Settings > All settings > General settings > EasyLink > EasyLink > On playing such content for the first time. HDR10+ or Dolby Vision content is supported only when HDMI Ultra HD is set to Optimal .
Delete demo file Location - Home or Shop (Home) > Apps > Demo me > Manage demos > Delete Delete demo file from your TV. (Home) > Settings > All settings > General settings > Location • Select the location of your TV • Select Shop, the picture style is switched back to Vivid, and can adjust shop settings. • Shop mode is for in-store promotion. Configuration of demo (Home) > Apps > Demo me > Manage demos > Configuration Set the TV to Main TV or Sub TV.
UTC - Coordinated Universal Time information. • If the clock is not correct, you can set the TV clock to Country dependent. • When select Country dependent, you can set the time for Automatic, Standard time, or Daylight saving time.
Universal access for hearing impaired people Lock for Programme (Home) > Settings > All settings > Universal access > Hearing impaired > On (Home) > Settings > All settings > Child lock > • Some digital TV channels broadcast special audio and subtitles adapted for the hard of hearing or deaf people. • Switched on, the TV automatically switches to the adapted audio and subtitles, if available. Parental rating Set a minumum age to watch rated programmes.
select OK to make the connection immediately. 3 - A message will be shown when the connection is successful. 13 Wireless and Networks Make the Connection - WPS (Home) > Settings > All settings > Wireless and networks > Connect to network > WPS 13.1 Home Network If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All settings > Wireless and networks > Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Switch On with Wi-Fi (WoWLAN) must be switched on.
server registration and parental rating settings, your video store app logins, all Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
14 Search Smart TV With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories. In the list of found keywords, select a keyword and press OK to search for items with that keyword. 14.
15 TV on Demand / Video on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
16 Ambilight Follow Flag (Home) > Settings > All settings > Ambilight > Ambilight style > flag 16.1 Ambilight Style Select one of the preset flag styles. (Home) > Settings > All settings > Ambilight > Ambilight style Follow App You can select the way Ambilight follows. (Home) > Settings > style > Follow app Follow Video (Home) > Settings > style > Follow video Ambilight > Follow Ambilight > Ambilight This function is available when you control Ambilight with an app.
3 - Switch on the Hue bulbs. Step 4 - Configure Bulb To start the configuration… In the following step, you will configure each Philips Hue bulb. 1 - Press (Home) > Settings > All settings > Ambilight > Ambilight + hue > Configure the hue bulbs. 2 - Select Start now and press OK. The TV will search for the Philips Hue Bridge. If the TV is not yet connected to your network, the TV will start the network setup first. If the Philips Hue Bridge appears in the list.
Bridge and bulbs. (Home) > Settings > All settings > Ambilight > Ambilight + hue > configuration Reset Reset current setup of the Ambilight+hue. 16.4 Advanced Ambilight Settings Wall colour (Home) > Settings > All settings > Ambilight > Advanced > Wall colour • Neutralise the influence of a coloured wall on the Ambilight colours • Select the colour of the wall behind the TV and the TV will modify the Ambilight colours to appear as they are intended.
17 Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
18 Rakuten TV Watch the latest new releases on your Smart TV. The biggest blockbusters, award winning classics and TV series available instantly. Press the key on your remote control or the app icon to open the Rakuten TV app. Your TV must be connected to the Internet to use the app. For more information about Rakuten TV, please visit www.rakuten.tv.
19 Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, please visit www.primevideo.com.
20 YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, please visit www.youtube.com.
Amazon account. The Amazon account is needed to pair with Alexa on TV. 4 - On your mobile device, sign in with the same Amazon account in the Amazon Alexa companion app. 5 - Complete following steps in the Amazon Alexa companion app. The first is to enable "Philips SAPHI Smart TV Voice Control" skill. The second is to link your Amazon account and then the final is to discover devices 6 - At the end of setup screen, you can select Done to start to use Alexa. 21 Alexa 21.
22 Environmental 22.1 European Energy Label When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
23 23.4 Specifications Supported Input Resolution Video 23.1 Power Support Timing Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Video support timing also includes field/frame rate 23.976Hz, 29.97Hz and 59.94Hz.
• Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360 photo 23.5 Supported Input Resolution Computer Wi-Fi Certified This TV supports Miracast certified devices. Performance may vary, depending on the capabilities of the mobile device and the software used. • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1280 x 800 - 60Hz • 1280 x 960 - 60Hz • 1280 x 1024 - 60Hz • 1366 x 768 - 60Hz • 1440 x 900 - 60Hz • 1920 x 1080 - 60Hz • 3840 x 2160 - 60Hz 23.
24 respond to the remote control. Troubleshooting Creaking sound at startup or switch off When you are turning the TV on or standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 24.1 Tips If you can't find a solution for your TV problem in Troubleshooting, you can use Keywords in Help > User manual to find the information you are looking for.
digital channels available. • Check if you selected the correct DVB (Digital Video Broadcast) system. Select DVB-T (terrestrial) when you use an antenna or common antenna, select DVBC (cable) if you use a TV cable service. • Redo the installation and check if you select the correct country and system. If you never put your TV in standby, you will regularly be notified by on screen messages that the display needs to execute this clean-up process. Please always follow those instructions.
• Do not display any still image continuously or display the same image for more than 10 minutes. • Recommend to use Standard or HDR Standard as picture style in normal home viewing condition. • Recommend to use OLED Contrast setting 50 or below in picture settings when playing Game or watching TV programs with logos or clocks on any parts of the screen. • Switch off On Screen Display (e.g. the home menus) of TV application program when not used.
• Reset all TV settings, go to (Home) > Settings > All settings > General settings > Reinstall TV. • Check the connections of the source/input devices. • If the picture size changes all the time, press (Home) > Settings > All settings > Picture > Picture Format > Fit to screen. • If the position of the picture is incorrect on the screen, try to check the signal resolution and output type of the connected device, press (Home) > Settings > All settings > Picture > Picture Format > Original.
show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection. If the picture and sound of a device connected with HDMI is distorted, check if a different HDMI Ultra HD setting can solve this problem. In Help > User manual, press the colour key Keywords and look up HDMI Ultra HD.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 25 Safety and Care 25.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design) and 2011/65/EC (RoHS). 26 Terms of Use 2019 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
27 27.4 Copyrights DTS-HD (italics) DTS 27.1 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 28 Open Source 28.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and name resolves asynchronously. Source: http://c-ares.haxx.se/ This television contains open source software. TP Vision Europe B.V.
The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ Source: http://www.gnu.org/software/inetutils/ iptables (1.4.15) For Cross connection. Source: http://www.netfilter.
libusb. This piece of software is made available under the terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ ain_Page mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc.
procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html to run . This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://www.denx.de udhcpc (0.9.8cvs20050303-3) Source: http://udhcp.
29 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index Eco, Light Sensor 42 End of Use 59 Energy Saving 42 Equalizer 39 European Eco-label 59 A Advanced Ambilight Settings 53 Advanced Picture Settings 36 Advanced Sound Settings 40 Alexa 58 Ambilight 51 Ambilight Style 51 Ambilight+hue 51 Ambilight+hue, Hue Bulbs 51 Ambilight, Brightness 51 Ambilight, Saturation 51 App Gallery 49 App lock 45 Audio Language 44 Audio Out Menu 40 Auto Clock Mode 44 F Favourite Channel, Channel Range 25 Favourite Channel, Create 25 Favourite Channel, Edit 25 Favourite Channe
Parental Rating 45 Pause TV 32 Philips Support 4 Philips TV Remote App 15 Photos, Videos and Music 33 Picture Clean, Noise Reduction 38 Picture Contrast Menu 37 Picture Format 38 Picture Motion 38 Picture Motion Style 38 Picture Style 35 Picture, Colour 36 Picture, Contrast 36 Picture, Light sensor 37 Picture, Sharpness 36 Problems 62 Universal Access, Hearing Impaired 44 Universal Access, Mixed Volume 44 Universal Access, Speech 44 Unlock Channel 25 Update Software 6 Update Software - Internet 6 Update So
Powered by TCPDF (www.tcpdf.
