Software Upgrade

Software History
ER10U_1.3.0.0_09481
Following problems are solved.
• Some channels not available after turn ON.
• Delta volume changes not remembered.
• Preferred channel changes not remembered.
• Green or yellow static (sometime snowy) on HDMI picture.
ER10U_1.2.0.0_07344
Following problems are solved.
• Picture and sound loss for 5 to 10 sec (green LED is still ON) and back to normal.
• Audio loss in all inputs and can be recovered when main switch ON and OFF.
• Turning to unknown channel when go to standby after cable installation.
• TV set turn ON by itself/ green LED light up and goes off when set is ON.
• Digital sub channels getting unlocked automatically if tuning to another sub channel in the
same major channel.
• Shadow/ghost effect seen in YPbPr and HDMI inputs
ER10U_1.1.0.0_07343
Following problems are solved
• Sometime Audio loss, recover when channel change.
• Crackling sound, Buzzing sound at high volume.
• Sometime menu pop up itself. It can be removed by pressing RC “menu “key.
• Improvement on virtual Dolby surrounds effect.
• Improve on OSD display too long.
• Include the possibility to download the rating table (RRT5 capability) for digital programs.
ER10U_1.0.3.0_07342
Following problems are solved
• White vertical edge seen in 4:3 and 14:9 format
ER10U_1.0.2.0_07341
Following problems are solved
• Set goes to protection when going to standby (in Auto-Clock mode).
• Some Factory commands are not working.
ER10U_1.0.0.0_01701
First Production released.