Register your product and get support at www.philips.com/welcome 46PFL3507 46PFL3507S 42PFL3507 42PFL3507S 42PFL3007 42PFL3007S 32PFL3507 32PFL3507S 32PFL3007 32PFL3007S User manual EN.
1 Notice 2 2 Important 4 3 Your TV 7 7 7 8 TV controls Remote control Remote control usage 4 Use your TV Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume Use teletext 5 Use more of your TV Access TV menus Add device to the home menu Rename devices from the home menu Remove devices from the home menu Change picture and sound settings Use advanced teletext features Create and use list of favorite channels Display the TV clock Use
1 Notice 2012 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
English Manufactured under license from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Screen care • • • • • Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. Unplug the TV before cleaning. Clean the TV and frame with a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV. To avoid deformations and color fading, wipe off water drops as soon as possible. Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time.
Environmental efforts Philips continuously focus on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efficient use, end-of-life instructions and product recycling. To access energy-efficient settings: 1 2 While you watch TV, press the green button on the remote control.
3 Your TV 1 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 2 TV controls VOL English Remote control 20 3 4 5 19 6 7 1 8 18 CH 2 9 10 11 12 3 13 14 4 POWER 15 a VOL +/-: Adjust volume. b CH 17 : Switch channels. 16 c MENU: Access the home menu. INPUT: Select connected devices. d POWER: Switch the TV on or off. a (Standby) Switch the TV on or to standby.
e (Home) Access the home menu. f INFO Display information about current activity. g (Navigation buttons) Navigate through menus and select items. h OK Confirm an entry or selection. i j OPTIONS Access options for the current activity or selection. (Back) Return to the previous menu or exit a function. k CH +/- (Channel +/-) Switch channels. l (Mute) Mute or restore audio. m +/- (Volume) Adjust volume. n Color buttons Select tasks or options. o 0-9 (Numeric buttons) Select channels.
This section helps you perform basic TV operations. Switch your TV off • Press the power switch on the TV again. »» The remote control sensor on the TV switches off. »» Though the TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet or turn off the power switch. Switch your TV on • English 4 Use your TV Press the power switch on the TV.
Other ways to switch channels • • Enter a channel number using the Numeric buttons. Press on the remote control to return to the previous channel. Watch connected devices Note •• Before you select a device as a source, switch the device on. Note •• When you use a favorite list, you can only select those channels in the list (see 'Create and use list of favorite channels' on page 175). Select a device from the source list 1 Press SOURCE on the remote control or INPUT on the TV.
• Use teletext Press +/- on the remote control. 1 • English Adjust TV volume Press +/- on the TV. 2 VOL 3 Press TEXT. »» The main index page appears. Select a page as follows: • Press the Numeric buttons to enter a page number. • Press CH +/- to view the next or previous page. • Press the Color buttons to select a color coded item. • Press to return to a previously viewed page. Press TEXT to exit teletext. To mute or unmute sound • • Press Press to mute the sound. again to restore the sound.
5 Use more of your TV 3 4 Access TV menus 5 Menus help you to install channels, change picture and sound settings and access other features. 1 Press . » The menu screen appears. Follow the on-screen instructions to add the device to the home menu. » The device is displayed in the home menu. To watch the device, switch it on, then select it in the home menu. You can also select the device with the source button.
Press OPTIONS. • Select [Remove device], then press OK. • • • • Select [Remove], then press OK. »» The selected device is removed from the home menu. • Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Note •• While you watch TV or external devices, press ADJUST , then select [Smart picture] or [Smart sound] for quick access to picture and sound settings.
[Advance sharpness]: Enable superior picture sharpness. • [Dynamic contrast]: Enhance contrast. [Medium] setting is recommended. • [Dynamic backlight]: Adjust brightness of the TV backlight to match lighting conditions. • [Color enhancement]: Make colors more vivid and improves the details in bright colors. You can switch this feature on or off. • [Gamma]: Adjust the midtone intensity in the picture. Black and white are not affected. [Picture format]: Change the picture format.
1 2 3 • • • • • • • • Press . • Select [Setup] > [TV settings] > [Sound], then press OK. Select one of the following settings, then press OK. [Smart sound]: Access predefined smart sound settings. [Reset]: Reset to factory default settings. [Clear sound]: Enhance the sound clarity. [Bass]: Adjust the bass level. [Treble]: Adjust the treble level. [Surround]: Switch on spatial sound. [Auto volume leveling]: Automatically reduce sudden volume changes, for example, when switching channels.
3 Select [Select list] > [Favorites], then press OK. »» Only channels in the favorites list appear in the channel grid. Note •• The favorites channel grid is empty until you add channels into the favorites list. View all channels You can exit the favorites list, and view all installed channels. 1 2 3 While you watch TV, press LIST. »» The channel matrix menu is displayed. Press OPTIONS. Select [Select list] > [All], then press OK. »» All channels are displayed in the channel grid.
4 Sleep timer switches the TV to standby after a pre-defined duration. Enter your code using the Numeric buttons. »» Follow the on-screen instructions to create or change your PIN code. English Automatically switch the TV to standby (sleep timer) Tip Tip •• You can switch off your TV earlier or reset the sleep •• If you forget your code, enter ‘8888’ to override any existing codes. timer during the countdown. 1 2 3 4 Press . Select [Setup] > [TV settings] > [Preferences] > [Sleep timer].
Change menu language Switch on Scenea 1 2 1 2 3 Press . Select [Setup] > [TV settings] > [Preferences] > [Menu language], then press OK. Select a language, then press OK. 1 2 While you watch TV, press Show or hide subtitles 1 2 While you watch TV, press SUBTITLE. Select one of the following, then press OK. • [Subtitles on]: Always display subtitles. • [Subtitles off]: Never display subtitles. • [On during mute]: When audio is muted, display subtitles.
1 2 3 4 • Switch on the TV. • • Connect the USB device to the USB port on the side of your TV. Press . • Select [Browse USB], then press OK. »» The USB browser appears. View photos 1 2 In the USB browser, select [Picture], then press OK. Select a photo or a photo album, then press OK to view the photo enlarged to fill the TV screen. • To view the next or previous photo, press or . View a slide show of your photos 1 2 When a full screen image of a photo is displayed, press OK.
View a slide show with music You can view picture slide show with background music. 1 2 3 4 5 6 Select an album of songs. 2 3 Press to return to the USB content browser. Select an album of pictures. •• Follow this procedure to avoid damage to your USB storage device. 1 2 Press OK. »» The slideshow begins. To exit, press . In the USB browser, select [Video], then press OK. Press OK to play. To control play, press the play buttons: • OK to play or pause. or to search backward or forward.
4 5 6 7 8 Find the information and software related to your TV, and locate the latest software update file. Compare the latest software version number to the current version on your TV. • If the current software version matches the latest software update file, you do not need to update your TV software. • If the current software version is lower than the latest software update file, download the latest software update file to the root directory of your USB device.
• • • [Clock]: Enable or disable the time display on the TV screen, and set clock options. [Status]: Display program information. [Ecology]: Apply settings that consume less energy. Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. 1 2 3 While you watch TV, press . Select [Setup] > [Watch demo], OK. Select a demo and press OK to view it.
Step 1: Select your system English 6 Install channels Note The first time you setup your TV, you are prompted to select a menu language and to install TV channels. Afterward, you can re-install channels and customize channels in other ways. •• Skip this step if your system settings are correct. 1 2 Automatically install channels You can search and store channels automatically. Step 1: Select your menu language 1 2 3 Press .
Rename channels You can rename channels. The name appears when you select the channel. 1 2 3 4 5 6 While you watch TV, press LIST. »» The channel matrix menu appears. Select the channel to rename. Press OPTIONS. »» The channel options menu appears. Select [Rename channel], then press OK. »» A text input box appears. Press or Numeric buttons to select each character, then press OK. When the name is complete, select [Done], then press OK.
This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the Quick Start Guide. More examples of connections with other devices are provided in the Quick Start Guide. b PC IN (VGA and AUDIO IN) Audio and video input from a computer. English 7 Connect devices VGA Note • You can use different types of connectors to connect a device to your TV.
e TV ANTENNA Signal input from an antenna. TV ANTENNA Side connections a HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. f SERV. U For use by service personnel only. g CVI 1/CVI 2 (Y Pb Pr and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players or game consoles. b AUDIO L/R Audio input from analog devices connected to VIDEO. c VIDEO Composite video input from analog devices such as VCRs.
DVI-HDMI cable • English d USB Data input from USB storage devices. PC IN AUDIO DVI e (Headphone) Stereo audio output to headphones or earphones. HDMI cable and HDMI-DVI adaptor • Connect a computer PC IN AUDIO Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: DVI Note •• Connections via DVI or VGA require an additional audio cable.
Use Philips EasyLink Get the most out of your HDMI-Consumer Electronic Control (CEC) compliant devices with Philips EasyLink enhanced control features. If your HDMI-CEC compliant devices are connected through HDMI, you can control them at the same time with your TV remote control.
1 2 3 While you watch TV, press English Select speaker output with Options menu If [EasyLink] or [EasyLink autostart] are selected, access the Options menu to switch the TV audio. OPTIONS. Select [Speakers], then press OK. Select one of the following, then press OK: • [TV]: On by default. Stream TV audio through TV and the connected HDMICEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected device.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
• For 32PFL35x7: English Supported TV mounts To mount the TV, purchase a Philips TV mount or a compatible TV mount. 3x Warning •• Follow all instructions provided with the TV mount. TP Vision Netherlands B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Before you mount, perform these steps: 1 2 To prevent damage to cables and connectors, leave a clearance of at least the following distance from the back of the TV. • For xxPFL35x7: 4.8 cm (1.
9 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/orientation. •• Replace the remote control batteries if they are flat or weak.
Check that the devices are connected properly. •• Check that the picture settings are correctly set. The TV did not save your picture settings: • Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings. The picture does not fit the screen; it is too big or too small: •• Try using a different picture format. The picture position is incorrect: •• Picture signals from some devices may not fit the screen correctly.
10 Index end of use recycle while you watch TV A analog channels fine-tune language, change audio language 25 20 20 factory settings favorites list, add H C channels favourites hide or unhide install (automatic) install (manual) rearrange rename reorder switch channels, fine-tune (analog) child lock computer, see PC connect connect, PC connect, USB controls D demo devices add watch digital channels language, change subtitles display, wallpaper 17 17 25 25 26 26 26 11 25 19 29 29 20 9 EasyLink en
recycle reinstall TV rename channels reorder channels S Scenea, see screen saver Scenea, switch on screen saver settings assistant picture sound shop mode sleeptimer smart picture smart sound sound settings specifications standby subtitles English R 7 25 26 26 20 20 20 15 15 16 23 19 15 16 16 32 11 20 T teletext dual screen enlarge subpages teletext 1.
Specifications are subject to change without notice © 2012 TP Vision Netherlands B.V. All rights reserved.
