Register your product and get support at 6201 series www.philips.
Contents 1 TV tour 10.1 About the Home menu 10.2 Open the Home menu 4 1.1 Smart TV 4 1.2 App gallery 4 1.3 Rental videos 4 1.4 Ultra HD TV 4 1.5 Pause TV and recordings 1.6 Smartphones and tablets 1.7 Ambilight 4 2 Setting up 4 4 3 Network 6 40 41 41 14.1 Start Internet 15 Videos, photos and music 12 16 Smartphones and tablets 16.1 Philips TV Remote App 16.2 Miracast 44 16.3 MHL 45 16.4 Smart TV 45 17 Ambilight 49 18 Multi room 24 19 Settings 51 51 51 52 6.1 Key overview 25 6.
23.3 23.4 23.5 23.6 23.7 23.8 23.9 Reception 83 Display type 84 Display input resolution Dimensions and Weights Connectivity 84 Sound 84 Multimedia 84 24 Help and support 84 84 86 24.1 Register your TV 86 24.2 Using help 86 24.3 Troubleshooting 86 24.4 Online help 88 24.5 Consumer care / Repair 25 Safety and care 25.1 Safety 89 25.2 Screen care 26 Terms of use 27 Copyrights 89 90 91 92 27.1 MHL 92 27.2 Ultra HD 92 27.3 HDMI 92 27.4 Dolby Digital Plus 92 27.5 DTS 2.0 + Digital Out ™ 27.
* Depending on the video streaming service of the selected video store. 1 TV tour 1.4 1.1 Ultra HD TV Smart TV This TV has an Ultra HD display. Its resolution is four times as much as normal HD displays. Ultra HD means 8 million pixels for the most refined and lifelike picture on TV. Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
1.7 Ambilight Ambilight is the most elegant and exclusive feature of your new Philips TV. A subtle glow of coloured light that comes from behind the screen - expanding your visual experience. With Ambilight your eyes relax but your mind is fully taken up by what you see. Select one of the many Ambilight styles to follow your mood.
according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting up 2.1 Read safety 2.3 Read the safety instructions first before you use the TV. Tips on placement To read the instructions, in Help, press the colour key Keywords and look up Safety instructions. • Position the TV where light does not shine directly on the screen.
2.5 Antenna cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals.
select Done to make the connection immediately. If your router supports WPS or WPS PIN, you select WPS, WPS PIN or Standard. Select your choice and press OK. 7 - A message will be shown when the connection is successful. 3 Network 3.1 Network and Internet Home network WPS To enjoy the full capabilities of your Philips TV, your TV must be connected to the Internet. If your router has WPS, you can directly connect to the router without scanning for networks.
• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality. • Use a high-speed (broadband) Internet connection for your router. Network settings View network settings You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc. DHCP • If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on.
enter the menu. 2 - Select Digital Media Renderer - DMR and press OK. 3 - Select On and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. device. To switch on Wi-Fi Smart Screen… Switch on Wi-Fi connection 1 - Press , select Network and press (right) to enter the menu. 2 - Select Wi-Fi smart screen and press OK. 3 - Select On and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. You can switch on or off Wi-Fi connection on your TV.
File sharing The TV can connect to other devices in your wireless network, like your computer or smartphone. You can use a computer with Microsoft Windows or Apple OS X. On this TV, you can open photos, music and videos stored on your computer.
4 Connect devices 4.1 About connections Connectivity guide Copy protection Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management).
that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands. HDMI Ultra HD This TV can display Ultra HD signals. Some devices connected with HDMI - do not recognise a TV with Ultra HD and might not work correctly or show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle.
1 - Press , select General settings and press (right) to enter the menu. 2 - Select EasyLink > EasyLink Remote Control and press OK. 3 - Select On or Off and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. Copy protection DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).
Scart CI+ SCART is a good quality connection. This TV is ready for the CI+ Conditional Access. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals. The SCART connection also supports NTSC playback. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region.
more information. Passwords and PIN codes For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV. Satellite tuner Connect the dish antenna cable to the Satellite receiver. To set the PIN code for the CAM… Next to the antenna connection, add an HDMI cable to connect the device to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection. 1 - Press SOURCES .
Audio sync delay For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio Out Delay on the TV.
4 - Press (left) repeatedly if necessary, to close the menu. Wired For a wired connection, use the HDMI 4 MHL connection on the back of the TV. In Help, press the colour key Keywords and look up HDMI MHL for more information. Audio out levelling Use the Audio Out Levelling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing. 4.
4.8 Headphones You can connect a set of headphones to the connection on the back of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. CVBS - Audio L R CVBS - Composite Video is a high quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. To adjust the volume… 1 - Press , select Sound > Headphone volume and press OK.
corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. 4.10 USB hard drive What you need If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar). Formatting Before you can pause or record a broadcast, you must connect and format a USB Hard Drive.
4.12 Connect USB mouse Connect a USB keyboard (USB-HID type) to enter text on your TV. Connect USB mouse Use one of the USB connections to connect. You can connect a USB mouse (USB-HID type) to navigate pages on the Internet. On an Internet page, you can select and click on links more easily. Connect the mouse Switch the TV on and connect the USB mouse to one of the USB connections on the TV. You can also connect the USB mouse to a connected USB keyboard.
press SOURCES and select USB. Audio Video LR / Scart To stop watching the USB flash drive content, press EXIT or select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime. You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter (sold separately) to connect to the SCART connection.
Ideal setting If you connect a computer, we advice you to give the connection, on which the computer is connected, the correct device type name in the Source menu. If you then switch to Computer in the Source menu, the TV is set to the ideal Computer setting automatically. You can manually switch the ideal setting to Off for watching TV or Game for playing a game from a connected game console (remember to switch back to Off when you stop playing a game).
To switch the TV on standby, select and press the joystick key. 5 Switching On and Off 5.1 On or standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. 5.3 Sleep timer With the Sleep Timer, you can set the TV to switch to Standby automatically after a preset time. To set the Sleep Timer… 1 - Press , select General settings > Sleep timer and press OK.
6 Remote control 6.1 Key overview Top 1 - Home To open the Home menu. 2 - SMART TV To open the Smart TV start page. 3 - Colour keys Direct selection of options. Blue key , opens Help. 1 - Standby / On To switch the TV on or back to Standby. 4 - INFO To open or close programme info. 2 - Playback and Record • Play , to playback.
6.3 Batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control. 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
4 - The selected channel is marked with a . 5 - To finish, press BACK . The channels are added to the Favourites list. 7 Channels To remove a channel from the favourites list, select the channel with , then press again to unmark as favourite. 7.1 Install Channels Reorder For more information, in Help, press the colour key Keywords and look up Channel, Antenna installation or Channel, Cable installation. You can reorder — reposition — channels in the Favourite channel list.
• To delete the character in front of the cursor, press Backspace . • To enter a character, select the character with the arrow keys and press OK. • To select uppercase characters, press . • To select numbers or special characters, press . • When you are ready, press BACK to close the on-screen keyboard. • To finish renaming, select Done and press OK. 6 - Press (left) to go back one step or press BACK to close the menu. 7.
show the subtitles you selected. Universal access In Help, press Keywords and look up access for more information. To set the primary and secondary subtitle language… Universal 1 - Press , select General settings > Languages > Primary subtitles or Secondary subtitles. 2 - Select the language you need and press OK. 3 - Press (left) to go back one step or press BACK to close the menu.
Dual I-II Status If an audio signal contains two audio languages but one language or both has no language indication, this option is available. Select Status to view technical information on the channel (if it is analogue or digital) or a connected device you are watching. Common Interface Share If you installed a CAM in one of the Common Interface slots, you can view the CAM and operator information or do some CAM related settings.
• Language To switch the group of characters that Text uses to display correctly. • Text 2.5 To activate the Text 2.5 for more colours and better graphics. What you need Interactive TV is only available on digital TV channels. To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the TV. HbbTV Text setup If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages.
About interactive TV With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages. Note: • You cannot download files to your TV with this feature. • Not all TV programmes, commercials and features include closed captioning information. • You cannot respond to the digital content. Visit the broadcaster's Internet website for more information.
Internet or vice versa. The TV might have switched to From the Internet automatically. To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. 8 TV Guide 8.1 What you need 8.3 With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
3 - Select Change day, select Previous day, Today or Next day and press OK. 4 - Press BACK to close the menu. Set a reminder You can set reminders that alert you of the start of a programme with a message on screen. • To set a reminder, select the programme in the schedule and press for Set reminder. The programme is marked with a clock. • To cancel the reminder, press the for Clear reminder. • To view a list of all reminders you have set, press OPTIONS, and select All reminders.
1 - To schedule a recording, press TV Guide . On the TV guide page, select the channel and programme you wish to record. You can enter the channel number to jump to the channel in the list. Press (Right) or (Left) to scroll through the programmes of a channel. To change the date of the list, press OPTIONS and select Change day. In the list, select the day you want and press OK. If the TV guide comes from the Internet, you can select the date at the top of the page and press OK.
• You can record the digital (DVB) subtitles of channel. You cannot record subtitles that come from Text services. To check if digital (DVB) subtitles are available, tune to the TV channel and press OPTIONS , select Subtitle language to open the list of Subtitles. You can only record a subtitle language preceded by a DVB icon. The moment you switch to a digital channel, the USB Hard Drive starts buffering the broadcast.
10 Home menu 10.1 About the Home menu Channels This row contains all channles. Sources This row contains available sources in this TV. Utilities This row contains TV functions which are available for user. Quick settings This row contains settings which are available for user. 10.2 Open the Home menu To open the Home menu and open an item… 1 - Press Home . 2 - Select an item and press OK to open or start it. 3 - Press BACK to close the Home menu without starting anything.
11 Utilities Smart TV Open Smart TV page. Internet Open Internet browser. TV guide For more information, in Help, press the colour key Keywords and look up TV guide. Recording For more information, in Help, press the colour key Keywords and look up Recording. Channel View channel list. Update software For more information, in Help, press the colour key Keywords and look up Update software. Demo Me View Demo Me for demo on this TV. Help Open Help page.
12 Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
13 13.3 Sources Scan connections 13.1 To rescan connections and update the Sources menu, press Scan connections. (if key is available on the bottom of the screen.) Switch to a device From the list of Sources, you can switch to any of the connected devices. You can switch to a tuner to watch TV, open the content of a connected USB Flash Drive or see the recordings you made on a connected USB Hard Drive.
14 Internet 14.1 Start Internet You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen. • Some plug-ins (e.g. to view pages or videos) are not available on your TV. • You cannot send or download files. • Internet pages are shown one page at a time and full screen. To start the Internet browser… 1234- Press Home > Utilities, and press OK. Select Internet and press OK. Enter an Internet address and press OK.
15 the computer. Videos, photos and music The menu bar 15.1 Navigate to the menu bar and select the type of file you want to watch or play. Select Photos , Music or Videos . Alternatively, you can open the Folders view and browse your folders to look for a file. From a USB connection Sorting To browse your photos by date, month, year or alphabetically by name, press Sort . To browse your music by album, artist, genre or alphabetically by name, press Sort .
15.5 15.6 View your photos Play your music View photos Play music To view photos, select Photos in the menu bar, select a photo thumbnail and press OK. If there are several photos in the same folder, select a photo and press Slide show to start a slide show of all photos in this folder. To jump to the next or previous photo, press + or - . To stop the slide show or close the photo, press (Stop). To view info on a photo (size, creation date, file path, etc.
16 Wi-Fi. Smartphones and tablets For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance. 16.1 Philips TV Remote App Switch on Miracast The new Philips TV Remote App on your smartphone or tablet is your new TV buddy. Make sure Wi-Fi Miracast is switched on. With the TV Remote App, you master your media around you.
The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time. From the TV To stop watching the screen of the device on TV, you can . . . Charging • press EXIT to watch a TV broadcast • press Home to start another activity on TV • press SOURCES to open the Sources menu and select a connected device. With the MHL cable connected, your device will charge while the TV is switched on (not in standby).
Tip Smart TV start page To enter text or to navigate an Internet page more easily, you can consider to connect a USB keyboard and a USB mouse to the TV. For more information, press Keywords and look up USB keyboard or USB mouse. 1234567- Now on your TV Your Apps App gallery Internet Recommended Apps Search Colour keys for control Setup Smart TV Your Apps The first time you open Smart TV, you need to configure your connection. Read and agree to the terms and conditions to continue.
1 - Press Home > Utilities > Smart TV . 2 - On the start page, select an App icon and press OK. In an App, press BACK to go back 1 step or page. try the World Wide Web and surf the Internet on TV. Close an App With the video store Apps in Smart TV, you can rent your favourite movie from an online rental video store. You can pay securely with your credit card. Rental video Apps To close an App and return to the Smart TV start page, press Smart TV .
Multi View While you are on a Smart TV App or the Internet, you can watch the current TV channel. Multi view opens a small screen for the TV channel next to the Smart TV screen. To open Multi view… 1 - Press SMART TV to open Smart TV. 2 - Press MULTI VIEW to open the small screen. 3 - Press + or – to change the TV channel in the small screen. Reset Smart TV To reset your connection with Smart TV, clear the Internet memory on the TV.
17 17.2 Ambilight Ambilight off To switch off Ambilight… 17.1 1 - Press AMBILIGHT. 2 - Select Off and press OK. 3 - Press (left) to go back one step or press BACK to close the menu. Ambilight style Follow video You can set Ambilight to follow the video dynamics or to show a preset colour style. Alternatively, you can switch Ambilight off. 17.3 If you select Follow video, you can select one of the styles that follow the dynamics of the picture on your TV screen.
1 - Press , select All Settings and press OK. 2 - Select Ambilight and press (right) to enter the menu. 3 - Select Advanced > Wall colour and press OK. 4 - In the colour palette, select the colour that matches the colour of the wall behind the TV. 5 - Press (left) repeatedly if necessary, to close the menu. TV switch off With TV switch off, you can set Ambilight to switch off immediately or slowly fade out when you switch off the TV.
standby. 18 Multi room Stream a TV channel 18.1 With Multi room, you can watch the current TV channel or open the channel list of the other TV. If you select a channel from the list, the other TV will also switch to the channel you selected. If the other TV has a build-in satellite tuner with installed channels or a connected Hard Disc Drive (HDD) with recordings*, you can also watch these on this TV. You cannot switch channels while the other TV is recording or in Pause TV mode.
19 Sleep timer Settings For more information, in Help, press the colour key Keywords and look up Sleep timer. 19.1 Quick settings 19.2 Eco settings Picture For more information, in Help, press the colour key Keywords and look up Eco settings. Picture style Select a style Picture style For easy picture adjustment, you can select a preset Picture Style. For more information, in Help, press the colour key Keywords and look up Picture style. 1 - While watching a TV channel, press .
Home or Shop Advanced picture settings If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting meant for in-store promotion. Game or computer When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.
4 - Press (left) repeatedly if necessary, to close the menu. Brightness Custom colour temperature With Brightness, you can set the level of brightness of the picture signal. Brightness is a setting intended for expert users. We recommend non-expert users to adjust the brightness of the picture with the Contrast setting. With Custom colour temperature, you can set a colour temperature yourself. To set a custom colour temperature, first select Custom in the Colour Temperature menu.
1 - Press , select Picture and press (right) to enter the menu. 2 - Select Advanced > Sharpness > Ultra Resolution, and press OK. 3 - Select On or Off. 4 - Press (left) repeatedly if necessary, to close the menu. fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some extreme picture formats can still show black bars. • Fit to screen – automatically zooms in the picture to fill the screen without distortion. Black bars may be visible.
3 - Press the arrows (up) or (down) to adjust the value. 4 - Press (left) repeatedly if necessary, to close the menu. the menu. The available styles are… • Personal - The sound preferences you set during the first start up. • Original - Most neutral sound setting • Movie - Ideal for watching movies • Music - Ideal for listening to music • Game - Ideal for gaming • News - Ideal for speech Surround mode With Surround Mode, you can set the sound effect of the TV speakers.
TV speakers Audio out format You can send the TV sound to a connected audio device - a Home Theatre System or audio system. For more information, in Help, press the colour key Keywords and look up Audio out format. You can select where you want to hear the TV sound and how you want to control it. • If you select TV speakers > Off, you permanently switch off the TV speakers. • If you select TV speakers > On, the TV speakers are always on.
Headphone volume Screen off With Headphones Volume, you can set the volume of a connected headphone separately. If you only listen to music, you can switch off the TV screen to save energy. To adjust the volume… To only switch off the TV screen… 1 - Press , select Sound and press (right) to enter the menu. 2 - Select Headphones volume and press OK. 3 - Press the arrows (up) or (down) to adjust the value. 4 - Press (left) repeatedly if necessary, to close the menu.
/ 4:2:2 signals. The setting UHD 4:2:0 allows UHD YCbCr 4:2:0 signals. Clock To set the signal quality… In Help, press Keywords and look up Clock settings for more information. 1 - Press , select General settings and press (right) to enter the menu. 2 - Select HDMI Ultra HD > HDMI 3 & 4 and press OK. 3 - Select UHD 4:4:4/4:2:2, UHD 4:2:0 or UHD Off and press OK. 4 - Press (left) repeatedly if necessary, to close the menu.
Home or Shop HbbTV If the TV is installed in a shop, you can set the TV to display an in store promotion banner. Picture style is set to Vivid automatically. Switch off timer is switched off. If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages. 1 - Press , select General settings and press (right) to enter the menu. 2 - Select HbbTV, and press OK. 3 - Select On or Off. 4 - Press (left) repeatedly if necessary, to close the menu.
The new code is set. CAM settings Forgotten your Child Lock PIN code? Switch on operator profile If you forgot your PIN code, you can override the current code and enter a new code. To switch on operator profile for CI+/CAM for easy channel installation and updates... View CAM profile name 1 - Press , select Child lock and press (right) to enter the menu. 2 - Select Change code and press OK. 3 - Enter the overriding code 8888. 4 - Now enter a new Child Lock PIN code and enter it again to confirm.
To select an audio language when none of your preferred audio language is available… available. To know if a channel is analogue or digital, switch to the channel and open Channel Info in OPTIONS. 1 - Press OPTIONS . 2 - Select Audio language and select on the audio language you want temporarily. Text / Teletex Languages Subtitles Text pages Switch on To open Text/Teletext press TEXT, while you are watching TV channels. To close Text, press TEXT again. To switch on Subtitles, press SUBTITLE.
1 - Press , select the device and press OK. 2 - While watching a channel on the device, press OPTIONS , select Show device keys and select the key and press OK. 3 - Press BACK to hide the device keys. 4 - To close Text, press BACK again. 1 - Press TEXT. 2 - With Text/Teletext open on screen, press OPTIONS. 3 - Select Text 2.5 > Off. 4 - Press (left) repeatedly if necessary, to close the menu.
1 - While watching a TV channel, press OPTIONS , select Universal access and press OK. 2 - Select Hearing impaired, and select On. Manual time offset To adjust time offset… 1 - Press , select General settings > Clock > Manual time offset, and press OK. 2 - Press the arrows (up) or (down) to adjust the value. 3 - Press (left) repeatedly if necessary, to close the menu.
1 - Press , select Universal access and press (right) to enter the menu. 2 - Select Audio Description > Speakers/Headphones and press OK. 3 - Select Speakers, Headphones or Speakers + Headphones and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. Mixed volume You can mix the volume of the normal audio with the audio commentary. To mix the volume… 1 - Press , select Universal access and press (right) to enter the menu. 2 - Select Audio Description > Mixed volume and press OK.
20 Networks For more information, in Help, press the colour key Keywords and look up Network, for more information on connecting the TV to a network.
3456- 21 Channel installation Select Select Select Press Search for channels and press OK. Start now and press OK. Update channels and press OK. BACK to close the menu. 21.1 Antenna/cable installation Reinstall channels Update channels Reinstall all channels Automatic channel update You can reinstall all channels and leave all other TV settings untouched. If you receive digital channels, you can set the TV to automatically update the list with new channels.
For ease of use, all DVB-C settings are set to automatic. If your DVB-C operator gave you specific DVB-C values, the network ID or network frequency, enter these values when the TV asks for them during installation. If this results in having no channels installed or if some channels are missing, you can select the extended Full scan method. This method will take more time to search for and install channels.
frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK. 21.2 Channel list copy Introduction If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic, unless your cable provider gave you a specific symbol rate value. To enter the symbol rate value, use the number keys. Channel List Copy is intended for dealers and expert users.
Upload a channel list To not installed TVs Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. To a TV that is not yet installed 1 - Plug in the power plug to start the installation and select language and country. You can skip the channel search. Finish the installation. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, press , select General settings and press OK.
The TV switches itself off for 10 seconds and then back on again. Please wait. 22 Software Do not . . . • use the remote control • remove the USB memory device from the TV 22.1 Update software If a power cut occurs during the update, never remove the USB memory device from the TV. When the power returns, the update will continue. At the end of the update, the message Operation successful appears on screen. Remove the USB memory device and press on the remote control.
3 - Press (left) repeatedly if necessary, to close the menu. Open source Freetype (2.4.3) FreeType is a software font engine that is designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output (glyph images). This piece of software is made available under the terms and conditions of the FreeType Project license, which can be found below. Source: http://freetype.sourceforge.net 22.5 Open source software This television contains open source software.
Used by boot loader and only linked with boot loader, GPL license. This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://sourceforge.net/projects/u-boot/files/ u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download and abstraction layer, and integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications.
mtd-utils (1) The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc., but will only need to provide simple routines for read, write and erase. Presentation of the device's contents to the user in an appropriate form will be handled by the upper layers of the system.
This piece of software is made available under the terms and conditions of the e2fsprogs license, which can be found below. Source: http://e2fsprogs.sourceforge.net/ findutils (4.2.31) The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ alsa (1.0.24.
net-tools (1.6) The Net-tools?package is a collection of programs for controlling the network subsystem of the Linux kernel. Source: http://www.linuxfromscratch.org/blfs/view/6. 3/basicnet/net-tools.html Source: http://uriparser.sourceforge.net/ xerces-c++ (3.1.1) For MPEG-DASH Source: http://xerces.apache.org/ webp (0.2.1) For Netflix Source: https://code.google.com/p/webp/ procps (ps, top) (3.2.
The original download site for this software is : http://lloyd.github.com/yajl/This piece of software is made available under the terms and conditions of the ISC license Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/ lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21 82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz software used in this Philips TV.
This piece of software is made available under the terms and conditions of the libjpg license, which can be found below. Source: http://www.ijg.org/ http://www.openssl.org/source/openssl-1.0.0.tar.gz Expat (2.01) xml paser; Expat is an XML parser library written in C. It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). An introductory article on using.
free/open software, licensed under the GPL, for accessing SquashFS filesystems. This piece of software is made available under the terms and conditions of the SquashFS license, which can be found below. Source: http://squashfs.sourceforge.net/ NTFS-3G is an open source cross-platform implementation of the Microsoft Windows NTFS file system with read-write support. NTFS-3G often uses the FUSE file system interface, so it can run unmodified on many different operating systems.
When Wifi Display or streaming RtspPlayer are enabled. This piece of software is made available under the terms and conditions of the electric-fence license, which can be found below. Source: www.live555.com Bash is an sh-compatible shell that incorporates useful features from the Korn shell (ksh) and C shell (csh). It is intended to conform to the IEEE POSIX P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use.
Source: http://www.skbuff.net/iputils/ Various system utilities. Source: http://userweb.kernel.org/~kzak/util-linuxng/ module-init-tools (3.12) Provides developer documentation for the utilities used by Linux systems to load and manage kernel modules (commonly referred to as "drivers"). Source: https://modules.wiki.kernel.org/index.php/M ain_Page udhcpc (0.9.8cvs20050303-3) Udhcpc is a very small?DHCP?client geared towards?embedded systems. Source: http://udhcp.sourcearchive.com/downloads/ 0.9.
specification for the encryption of electronic data. Used inside Philips libraries. Source: http://gladman.plushost.co.uk/oldsite/AES/ Source: http://jquery.com/ Libupnp (1.2.1) The Linux* SDK for UPnP* Devices (libupnp) provides developers with an API and open source code for building control points, devices, and bridges that are compliant with Version 1.0 of the UPnP Device Architecture Specification. Source: http://upnp.sourceforge.net/ microhttpd (libmicrohttpd-0.9.9.tar.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. 23 Specifications 23.1 Environmental Please inform yourself about the local separate collection system for electrical and electronic products. European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
23.3 23.6 Reception Dimensions and Weights • Aerial input : 75 ohm coaxial (IEC75) • Tuner bands : Hyperband, S-Channel, UHF, VHF • DVB : DVB-T2, DVB-C (cable) QAM • Analogue video playback : SECAM, PAL • Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2), MPEG4 SD/HD (ISO/IEC 14496-10) • Digital audio playback (ISO/IEC 13818-3) 43PUx6201 • without TV stand: Width 968.18 mm - Height 575.71 mm - Depth 81.8 mm - Weight ± 9.3 kg • with TV stand: Width 968.18 mm - Height 622.34 mm - Depth 204.
23.9 Multimedia Connections • USB 2.0 / USB 3.0 • Ethernet LAN RJ-45 • Wi-Fi 802.11b/g/n (built-in) Supported USB file systems • FAT 16, FAT 32, NTFS Playback formats • Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS, MPEG-4, Matroska (MKV), Quicktime (MOV, M4V, M4A), Windows Media (ASF/WMV/WMA) • Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4 Part 10 AVC (H.264), VC-1, WMV9 • Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital Out™, MPEG-1/2/2.
When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 24 Help and support 24.1 Register your TV TV does not respond to the remote control The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour.
• Make sure that the volume is not muted or set to zero. • Make sure that the TV audio output is connected to the audio input on the Home Theatre System. Sound should be heard from the HTS speakers. • Some devices may require you to manually enable HDMI audio output. If HDMI audio is already enabled, but you still do not hear audio, try changing the digital audio format of the device to PCM (Pulse Code Modulation). Refer to the documentation accompanying your device for instructions.
24.5 Wi-Fi and Internet Consumer care / Repair Wi-Fi network not found or distorted • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. For support and repair, call the Consumer Care hotline in your country.
25 Risk of injury or damage to the TV Safety and care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design), 2010/30/ EU (Energy Labelling) and 2011/65/EC (RoHS). 26 Terms of use 2016 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
27 Copyrights 27.1 MHL 27.5 MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. DTS 2.0 + Digital Out ™ For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. 27.2 Ultra HD The DIGITALEUROPE UHD Display Logo is a trademark of DIGITALEUROPE. 27.
PlayReady-protected content and/or WMDRMprotected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content.
Index Clear Sound 57 Clock settings 63 Colour 53 Colour, Colour enhancement 53 Colour, colour temperature 53 Colour, custom colour temperature 54 Common Interface Slot 15 Computer, connect 22 Connect, USB Flash Drive 21 Connectivity Guide 12 Consumer Care 88 Contact Philips 88 Contrast 53 Contrast, Contrast Mode 54 Contrast, Dynamic Contrast 54 Contrast, Gamma 54 Contrast, Video Contrast 54 A Age Rating 28 Ambilight, Advanced- TV switch off 50 Ambilight, Advanced- Wall colour 49 Ambilight, Ambilight bright
Problems, Remote control 86 Problems, Sound 87 Product Fiche 83 I iTV 31 K R Keys on TV 24 Radio stations 27 Reception Quality 68 Recording 35 Recording, TV Guide data 33 Register your product 86 Reinstall TV 67 Remote control and batteries 26 Rental videos 47 Repair 88 L Language settings 61 M Media 42 Media files, from a computer or NAS 42 Media files, from a USB drive 42 Miracast™, switch on 44 MPEG Artefact Reduction 55 S N Safety instructions 89 SCART connection, tips 15 Sharpness 53 Sharpnes
W Watch TV 28 Wi-Fi 8 Wired network 9 Wireless network 8 WoWLAN 9 Y YPbPr connection, tips 14 96
Powered by TCPDF (www.tcpdf.
