7556 Series User Manual 43PUS7556 50PUS7556 55PUS7556 65PUS7556 Register your product and get support at www.philips.
Contents 1 Get Support 4 11.2 Frequent Settings and All settings 30 1.1 Identify and Register your TV 4 11.3 All Settings 30 1.2 TV Help and User Manual 4 12 Wireless and Networks 41 1.3 Consumer Care / Repair 4 12.1 Home Network 41 2 Software 5 12.2 Connect to Network 41 2.1 Update Software 5 12.3 Wireless and Network Settings 41 2.2 Software Version 5 13 Smart TV 43 2.3 Automatic Software Update 5 13.1 Setup Smart TV 43 2.4 View Software Update History 5 13.
24.3 DTS-HD 59 24.4 Wi-Fi Alliance 59 24.5 Other Trademarks 59 25 Open Source 60 25.1 Open Source Software 60 25.
installation. • Contact info - Show the telephone number or web address for your country or region. 1 Get Support * Sorting channels is only applicable for certain countries. 1.1 Identify and Register your TV ** Ambilight setting is only for models which support Ambilight function. Identify your TV - TV model number and serial number 1.3 You might be asked to provide the TV product model number and serial number.
2 back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 2.1 Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
Display the list of software versions that are successfully update on the TV.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control. 1 - Standby / On To switch the TV on or back to Standby. 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries.
1 - Standby / On To switch the TV on or back to Standby. 2 - OPTIONS To open or close the Options menu. 1 - OK key To confirm a selection or setting. To open the channel list while watching TV if Interactive Service is not available. 3- To launch the Amazon prime video App. 4- To open the Netflix App directly. With the TV switched on or from standby. 2 - Back To close a menu without changing a setting. 3 - Playback and Record • Play , to playback. • Pause , to pause playback.
2 - Volume Prese + or - to adjust the volume level. 3 - Number keys To select a channel directly. 4 - Channel list To open the channel list. 5 - Channel Prese + or - to switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. 6 - Mute To mute the sound or to restore it. 7 - SUBTITLE To open Subtitle page. 1 - - EXIT Press to switch back to watch TV or to stop an interactive TV application. 3.
1 - With the TV switched on, press the joystick key on the bottom of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. Select Demo, to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically.
4 Wall Mounting Setting Up Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . 4.1 Read Safety Read the safety instructions first before you use the TV. To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. 4.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On Press the small joystick key on the bottom of the TV. Switch to standby To switch the TV to standby, press on the remote control. You can also press the small joystick key on the bottom of the TV.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.
HDMI ARC/eARC Only HDMI 1 on the TV have Return Channel). Headphones HDMI ARC (Audio You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV.
you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme. Apps - Philips TV Remote App With the TV Remote App, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch on the TV Guide and watch it on your phone or TV. With the TV Remote App you can use your phone as a remote control*.
1. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV. 2. While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE. 3. Push the CAM in as far as it will go. Leave it in the slot permanently. When you switch on the TV, it may take a few minutes before the CAM is activated.
6 Switch Source 6.1 Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press OPTIONS and select Device info. • To close the source menu without switching to a device, press SOURCES again. 6.
for channels 7 Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. This can take a few minutes. 7.1 About Channels and Switch Channels Quick reinstall (Home) > Settings > Install Channels > Antenna/cable installlation > for channels To watch TV channels • Press . The TV tunes to the TV channel you last watched. • Press (Home) > TV > Channels and press OK. • Press + or - to switch channels.
frequency value to search for channels, select Advanced. the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. Frequency step size The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz.
• Fine tune To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. usually you can select this type for your LNB. • Low LO Frequency / High LO Frequency - The local oscillator frequencies are set to standard values. Adjust the values only in case of exceptional equipment that needs different values. • 22 kHz Tone - By default, the Tone is set to Automatic.
channel update, you can switch it off. Copy a Channel List, Check Channel List Version Copy a channel list to USB flash drive Manual Installation (Home) > Settings > Install Channels > Satellite installlation > installtion (Home) > Settings > All settings > > Channel list copy > Copy to USB Channels Manual Check channel list version Manually install satellite.
the TV successfully. Unplug the USB flash drive. To read more information, in Help, press the colour key Keywords and look up Audio Language. Channel Options Dual I-II Open Options If an audio signal contains two audio languages but one language or both has no language indication, this option is available. While watching a channel, you can set some options. Depending on the type of channel you are watching or depending on the TV settings you made, some options are available.
3 - Select one channel you want to rename. 4 - Press OPTIONS > Rename channel, and press OK. 5 - In the typing field, press OK to open on-screen keyboard, or press Back to hide the on-screen keyboard. 6 - Use navigation keys to select a character, then press OK. - Press (red) key to enter with lower-case - Press (green) key to enter with upper-case - Press (yellow) key to enter number and symbol - Press (blue) key to delete a character 7 - Select Done when complete the editing.
Search Channels > OK > OPTIONS > Create a Favourites List Search channel 1 - While watching a TV channel, long press TV Guide to open the channel list. 2 - Select the channel, and press Mark as favourites to mark as favourite. 3 - The selected channel is marked with a . 4 - To finish, press Back . The channels are added to the Favourites list. You can search for a channel to find it in a long list of channels.
you know"-channel provides useful tips to improve the way you use your TV. Text Options * Satellite channel only can be searched on xxPxSxxxx TV models. In Text/Teletext, press OPTIONS to select the following… • Freeze page To stop the automatic rotation of subpages. • Dual screen / Full screen To show the TV channel and Text alongside each other. • T.O.P. overview To open T.O.P. Text. • Enlarge To enlarge the Text page for comfortable reading. • Reveal To unhide hidden information on a page.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press Channel up to view the schedule of one of the next days. Press Channel down to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels.
9 Freeview Play (for UK models) 9.1 About Freeview Play To enjoy Freeview Play*, you need to connect your TV to Internet first. Freeview Play offers: • Watch TV programmes you missed from the last seven days. • Watch live TV and on demand, all in one place without entering an app, you can search Freeview Play programmes in TV Guide. • Watch over 70 standard channels and upto 15 HD channels. • Enjoy on demand services like BBC iPlayer, the ITV Hub, All 4, Demand 5, BBC NEWS and BBC SPORT.
10 10.3 Videos, Photos and Music Photos View Photos 1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and press (right) to select the USB device you need. 3 - Select Photo, you can press Sort to browse your photos by day, month or year. 4 - Select one of photos, and press OK to view the selected photo. • To view photos, select Photos in the menu bar, select a photo thumbnail and press OK.
10.4 Video Options Videos When browsing video files, press OPTIONS to… Play Videos List/Thumbnails View video files with list view or thumbnails view. To play a video on TV… Subtitles Display the subtitles if available, select On, Off, or On during mute. Select Videos , and select the file name and press OK. Shuffle off, Shuffle on Play videos in sequential order, or at random. • To pause the video, press OK. Press OK again to continue. • To rewind or go fast forward, press or .
• Install channels - Update channels or start a complete new channel installation. • Picture style - Select one of preset picture styles for ideal picture viewing. • Picture format - Select one of preset picture format which fits the screen. • Sound style - Select one of preset sound styles for ideal sound settings. • Audio out - Set the TV to play the sound on TV or on the connected audio system. • Sleep timer - Set the TV to switch to standby automatically after a preset time.
sources. ** Picture style - Monitor is only available when HDMI source video is applicable for PC application. HDR is not supported in Monitor mode. The TV is able to play HDR video in Monitor mode but no HDR processing will be applied. Adjust the picture contrast (Home) > Settings > All settings > Picture > Backlight contrast Press the arrows (up) or (down) to adjust the contrast value of the picture.
Dynamic Contrast Customise colour temperature (Home) > Settings > All settings > Picture > Expert mode settings > Dynamic contrast (Home) > Settings > All settings > Picture > Expert mode settings > Custom colour temperature Select Custom in Colour temperature menu to customise a colour temperature yourself. Press the arrows (up) or (down) to adjust the value.
settings > Picture > Expert mode settings > reduction Noise Picture Format (Home) > Settings > All settings > Picture > Picture format Select Maximum, Medium, Minimum to set the level for removing the noise in video content. Noise is mostly visible as small moving dots in onscreen picture. If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely.
next setting. • To do these steps, make sure the TV can tune to a TV channel or can show a programme from a connected device. AI Equalizer (Home) > Settings > All settings > Sound > Personal mode settings > Equalizer AI Select On to enable intelligent equalizer adjustment based on audio content and custom settings. Sound Settings Sound Style Custom AI Equalizer Select a style For easy sound adjustment, you can select a preset sound style.
devices have no multichannel sound processing, select to only output stereo content to your audio playback devices. • Multichannel: Select to output multichannel audio content (compressed multichannel sound signal) or stereo audio content to your audio playback devices. • Multichannel (bypass): Select to send original bitstream from HDMI ARC to the connected HDMI Sound System.
detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. Channels HbbTV Settings - Hybrid Broadcast Broadband TV Mouse Settings (Home) > Settings > All Settings > Channels > HbbTV settimgs > HbbTV (Home) > Settings > All settings > General settings > Mouse settings If a TV Channel offers HbbTV services, you must first switch on HbbTV in the TV settings to access to these advanced services, e.g. video on-demand and catchup TV services.
Select Backdrop to enable the Screensaver. Select Off to disable the Screensaver. is applied to reduce the lag, judder and frame tearing for better gaming experience. Note: To watch HDR10+ or Dolby Vision content from HDMI source, you may need to power off your player and power on again when the player connected to TV playing such content for the first time.
Location - Home or Shop Delete demo file (Home) > Settings > All settings > General settings > Location (Home) > Apps > Demo me > Manage demos > Delete Delete demo file from your TV. • Select the location of your TV • Select Shop, the picture style is switched back to Vivid, and can adjust shop settings. • Shop mode is for in-store promotion. Configuration of demo (Home) > Apps > Demo me > Manage demos > Configuration Set the TV to Main TV or Sub TV.
Lock for Programme Universal access for hearing impaired people (Home) > Settings > All settings > Child lock > Parental rating (Home) > Settings > All settings > Universal access > Hearing impaired > On Set a minumum age to watch rated programmes. • Some digital TV channels broadcast special audio and subtitles adapted for the hard of hearing or deaf people. • Switched on, the TV automatically switches to the adapted audio and subtitles, if available.
these languages are available, the TV will show the subtitles you selected. (Home) > Settings > All settings > Region and language > Clock > Sleep timer. Set the TV to switch to Standby automatically after a preset time. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown.
12 Wired Connection Wireless and Networks What You Need To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet. 12.1 Home Network To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your network router. 12.
If you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. Netflix settings (Home) > Settings > All settings > Wireless and networks > Wired or Wi-Fi > Netflix settings Network Configuration - Static IP Configuration With Netflix settings, you can view ESN number or deactive Netflix device.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. 13 Smart TV Search With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories.
14 Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
15 Rakuten TV Watch the latest new releases on your Smart TV. The biggest blockbusters, award winning classics and TV series available instantly. Press the key on your remote control or the app icon to open the Rakuten TV app. Your TV must be connected to the Internet to use the app. For more information about Rakuten TV, please visit www.rakuten.tv.
16 Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, please visit www.primevideo.com.
17 YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, please visit www.youtube.com.
18 Google Assistant Google Assistant is available on Philips Android TVs running on Android O (8) or higher OS version. GA is available in selected languages and countries with English-UK and German-DE and French-FR being supported from the start. Supported language/countries list is going to be expanded overtime. For latest language and countries support list please contact our consumer care. Your TV can work with the Google Assistant.
19 Environmental 19.1 European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use. You can also find the power consumption values for this product on the Philips website for your country at www.philips.
20 20.4 Specifications Supported Input Resolution Video 20.1 Power Support Timing Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Video support timing also includes field/frame rate 23.976Hz, 29.97Hz and 59.94Hz.
20.6 20.8 Sound Connectivity Output power (RMS) : 20W Dolby MS12 V2.4 • Dolby Atmos • DTS – HD (M6) • Surround Virtualizer + Height Virtualizer • Dolby Bass Enhancement • Clear Dialogue • AI Sound • AI EQ TV Side • Common Interface slot: CI+/CAM • USB 2 - USB 3.0 • Headphones - Stereo mini-jack 3.5mm • HDMI 3 in - UHD - HDR TV Rear • Audio out - Optical Toslink • USB 1 - USB 2.0 • Network LAN - RJ45 • Satellite tuner • Antenna (75 ohm) • HDMI 1 in - ARC/eARC - UHD - HDR • HDMI 2 in - UHD - HDR 20.
contraction of the TV as it cools and warms up. This does not affect performance. 21 Troubleshooting The TV goes back to standby after showing the Philips startup screen 21.1 When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup.
correct country and system. • Check if the settings are set to two satellites. Changing the installation settings did not solve my No analogue channels found during the installation • Check if the TV was connected with an antenna. Check the cable connections. • Check if you selected the correct DVB (Digital Video Broadcast) system. Select DVB-T (terrestrial) when you use an antenna or common antenna. • Redo the installation and select Digital and analogue channels during the installation.
press OK. (Home) > Settings > All settings > Picture > Picture style • Restore picture style, select back to Picture style, then press Restore style. • Reset all TV settings, go to (Home) > Settings > All settings > General settings > Reinstall TV. • Check the connections of the source/input devices.
no picture is displayed, switch the source from one device to another and back again. • This is an Ultra HD TV. Some older devices connected with HDMI - do not recognise an Ultra HD TV electronically and might not work correctly or show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 22 Safety and Care 22.1 Stability Hazards Safety A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Important Read and understand all safety instructions before you use the TV.
some lithium battery types). • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 22.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design) and 2011/65/EC (RoHS). 23 Terms of Use 2021 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
24 Copyrights 24.1 HDMI 24.4 HDMI Wi-Fi Alliance The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 24.5 Other Trademarks 24.2 Dolby Vision and Dolby Atmos All other registered and unregistered trademarks are the property of their respective owners.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 25 Open Source 25.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and name resolves asynchronously. Source: http://c-ares.haxx.se/ This television contains open source software. TP Vision Europe B.V.
The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ Source: http://www.gnu.org/software/inetutils/ iptables (1.4.15) For Cross connection. Source: http://www.netfilter.
libusb. This piece of software is made available under the terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ ain_Page mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc.
procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html to run . This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://www.denx.de udhcpc (0.9.8cvs20050303-3) Source: http://udhcp.
26 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index Favourite Channels A Advanced Picture Settings Advanced Sound Settings AI Equalizer Antenna App Gallery App lock Audio Language Audio Out Menu Auto Clock Mode Auto movie mode Automatic software update 31 34 34 13 43 39 39 35 40 37 5 G Gamma General Settings Get Support Google Assistant 7 C CAM PIN Channel List Channel List Copy Channel Options Channel, Channel Filter Channel, Rename Channel Channels Child Lock Child Lock, Change Code Child Lock, Set Code CI Card Clear dialogue Clear Internet Memo
Video Contrast Video on Demand View Network Settings View software update history Viewing Distance Q Quick Picture Settings Quick Settings Menu 33 30 R Reception Register TV Remote Control Remote Control - IR Sensor Remote Control and Batteries Rename or replace device icon Repair Reset Settings 50 4 7 9 7 17 4 38 W Whitepoint Alignment Wi-Fi S Safety and Care Satellite Screen Mirroring Screen Mirroring Connection Screen Off Screensaver settings Shop Setup Sleep Timer Smart TV Software Version Sound M
Powered by TCPDF (www.tcpdf.
