User Guide
5Preparation
Do not insert the power plug in a wall socket before all connections
are made.
& Place the TV on a solid surface.
For ventilation, leave at least 2” free all around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects on top of the TV.
Avoid heat, direct sunlight and exposure to rain or water.
é Connect a cable TV signal, to the ANT./CABLE jack at the back of the TV.
“ Demo pin
Your new TV is equipped with a Retail Demo Pin inserted in the IR
SHOOTER connector at the back of the TV.
On the retail floor with the Demo Pin inserted and the TV powered on, the
demo about
GUIDE Plus+ is automatically activated.
Remove the demo pin and insert the IR extender supplied into the IR
SHOOTER connector. (See Connect Peripheral Equipment, p. 39 to connect
your VCR/Cable converter box.)
This disables the Retail Demo feature and allows normal TV operation.
‘ Insert the power plug in the wall socket. Refer to the rear of the TV set
for the correct operation voltage. Consult your local dealer if your AC power
supply is different.To prevent damaging the power (AC) cord which could
cause a fire or electric shock, do not place the TV on the cord.
( Remote Control
Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1,5V).
Press the TV button to be sure your remote control is in the TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many areas exhausted batteries may not be disposed of with your
household waste. Please check on how to dispose of exhausted batteries according
to local regulations.
§ Turn the TV on
Press the POWER switch A on the front of your TV or press the red power
button on the remote control.
A green LED on the front of the TV lights up and the screen comes on.
When you switch on your set for the first time, the Install menu
automatically appears on the screen.
Follow the instructions shown on the screen to guide you through the first
time setup and use of your TV.
Preparation
ANT. / CABLE
DEMO PIN
This Demo Pin activates an
automatic GUIDE Plus+ demo.
RETAILERS
Do not remove this Demo Pin.
Removal will disable the auto-
matic demo.
CONSUMERS
Remove this Demo Pin and
insert the IR extender here
before using this TV.
WARNING
Dispose of properly.
KEEP AWAY FROM CHILDREN
R6 / AA
B
Sæ
lq
Q
CBL
INFO
+
GUIDE
+
EXITVCR
+
ALT
AUDIO
TV
SOURCE
SELECT
VCR AMP
SATHD DVD CD
TV
a a a a a










