User Guide

27Use of the menus
Source
This menu allows you to select and/or name the peripheral equipment you
connect to one of the AV inputs.
& Select Source with the cursor right.
The Source menu items appear.
é Press the cursor down to select the menu items..
When you select
Select, a list appears, showing the available sources. Selecting
a source causes the TV to begin showing video and playing audio from the
selected source.
When you select
AV1, AV2, AV3,AV4 or SIDE, a list appears allowing you to
identify which type of peripheral is attached to this input.
The TV detects the presence of the connected peripheral and the signal is
routed appropriately.
The name selected is automatically added to the source in the Select list.
“ Press the menu Ï button on the remote control to turn off all menus on
screen.
‘ Press the SOURCE button on the remote control.
The Source Select menu appears in which you may select a source or
peripheral connected to be displayed on screen.
Source
Select
AV1
AV2
AV3
AV4
Side
Settings
TV
AV1: Name
AV2: Name
AV3: Name
AV4: Name
Side: Name
Should your Remote Control be temporarily unavailable, or lost or broken,
the buttonpad on top of the TV allows you to summon and to navigate the
Main Menu, to tune TV channels, and to control the volume.
When the Main Menu is not displayed, the CH- or + buttons enable you
to select the TV channels, the V - or + buttons to adjust the volume.
Press the M button to summon the Main Menu and to confirm the selection
made (same function as the OK button)
Press the V - or + buttons to navigate left/right in the menu items.
Press the CH - or + buttons to navigate up/down in the menus.
Select the M button again or navigate to
Exit to dismiss the Main Menu.
Keypad on top of the TV
M
CH
V