Register your product and get support at 9002 series www.philips.
Contents 1 Setting Up 1.1 Read Safety 4 1.2 TV Stand and Wall Mounting 1.3 Tips on Placement 4 1.4 Power Cable 4 1.5 Antenna Cable 4 2 Remote Control 11 Sources 4 6 3 Switching On and Off 12 Networks 7 12.1 Network 12.2 Bluetooth 13 Settings 4 Channels 10 9 4.1 Install Channels 10 4.2 Channel Lists 10 4.3 Watching channels 11 4.4 Favourite Channels 13 4.
22.1 Environmental 99 22.2 Power 99 22.3 Operating System 99 22.4 Reception 99 22.5 Display Type 100 22.6 Display Input Resolution 22.7 Connectivity 100 22.8 Sound 100 22.9 Multimedia 100 23 Help and Support 100 102 23.1 Register your TV 102 23.2 Using Help 102 23.3 Troubleshooting 102 23.4 Online Help 103 23.5 Support and Repair 104 24 Safety and Care 24.1 Safety 105 24.2 Screen Care 25 Terms of Use 105 106 107 25.1 Terms of Use - TV 107 25.2 Terms of Use - Smart TV 26 Copyrights 107 108 26.
1 1.3 Setting Up Tips on Placement • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect. • Position the TV up to 15 cm away from the wall. • The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen. 1.1 Read Safety Read the safety instructions first before you use the TV.
Use this antenna connection for DVB-T and DVB-C input signals.
2 Remote Control 2.1 Key overview Top 1 TV Menu To open the TV Menu with typical TV functions. 2 - SOURCES To open or close the Sources menu. 3 - INFO To open or close programme info. 1 - Standby / On To switch the TV on or back to Standby. 2- 4 - BACK • To switch back to the previous channel you selected. • To return to previous menu. VOICE microphone 3 - LIST To open or close the channel list. 5 - Colour keys Direct selection of options.
When you started the initial TV installation, the TV invited you to long press the PAIR key, and by doing so, the pairing was done. Note: If the TV does not launch the voice search field when press VOICE, pairing was unsuccessful. Pairing or pairing again If the pairing with the remote control was lost, you can pair the TV with the remote control again. You can simply long press the PAIR key (approximate for 3 seconds) for pairing.
2.4 IR Sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. Warning Do not put any objects in front of IR sensor of the TV, it may block the IR signal. 2.5 Batteries If the TV does not react on a key press on the remote control, the batteries might be empty.
3 3.2 Switching On and Off Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… 3.1 1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. Select Demo, to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel.
1 - With a channel list open on screen, press OPTIONS. 2 - Select Select Channel List and press OK. 3 - In the list menu, select one of the available channel lists and press OK. 4 Channels 4.1 Alternatively, you can select the list name at the top of the channel list and press OK to open the list menu. Install Channels For more information, in Help, press the colour key Keywords and look up Channel, Antenna Installation or Channel, Cable Installation. Filter a Channel List 4.
search results. If you lock or unlock channels in a channel list, you only have to enter the PIN code just once until you close the channel list. 4.3 For more information, in Help, press the colour key Keywords and look up Child Lock for more information. Watching channels Tune to a Channel Parental Rating To start watching TV channels, press . The TV tunes to the channel you last watched. To prevent children from watching a programme not suitable for their age, you can set an age rating.
Subtitles Select a Subtitle Language Switch On If none of the preferred subtitle languages are available, you can select another subtitle language if available. If no subtitle languages are available, you cannot select this option. Digital broadcasts can have subtitles for their programmes. To show the subtitles… To select a subtitle language when none of your preferred languages are available… Press SUBTITLE. You can switch subtitles On or you can select Automatic. 1 - Press OPTIONS.
4 - Select the appropriate Common Interface slot and press (right). 5 - Select the TV operator of the CAM and press OK. The following screens come from the TV operator. until you close the Favourites List with the BACK key. 4.4 Favourite Channels HbbTV on this Channel About Favourite Channels If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only. In a favourite channel list, you can collect the channels you like.
4 - With the (up) or (down) keys move the channel where you want it. 5 - Press OK to confirm the new location. 6 - You can reorder channels with the same method until you close the Favourites List with the BACK key. Add a Range of Channels To add a consecutive range of channels to a Favourites List in one go, you can use Select Range. To add a range of channels… 1 - Open the Favourites List where you want to add a range of channels. 2 - Press OPTIONS, select Select Range and press OK.
Some devices that receive TV channels can also offer Text. To open Text from a connected device . . . 3 - Select Language > Primary Text or Secondary Text and press OK. 4 - Select your preferred Text languages. 5 - Press (left) repeatedly if necessary, to close the menu. 1 - Press SOURCES, select the device and press OK. 2 - While watching a channel on the device, press OPTIONS, select Show Device Keys and select the key and press OK. 3 - Press BACK to hide the device keys.
reception strength are shown on screen. 8 - When the TV found the satellites you need, select Install. 9 - If a satellite offers Channel Packages, the TV will show the available packages for that satellite. Select the package you need. Some packages offer a Quick or Full install for their available channels, select one or the other. The TV will install the satellite channels and radio stations. 10 - To store the satellite setup and installed channels and radio stations, select Finish.
Channel Packages User Band Frequency Satellite operators can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country. Some satellites offer subscription packages - a collection of channels you pay for. Next to the unique user band number, the built-in satellite receiver needs the frequency of the selected user band number. These frequencies are mostly shown next to the user band number on a Unicable switchbox.
channels of the found satellites. 7 - Select Finish and press OK to store the channels and radio stations. Homing Transponder and LNB In some countries, you can adjust the expert settings for homing transponder and each LNB. Only use or change these settings when a normal installation fails. If you have non-standard satellite equipment, you can use these settings to overrule the standard settings. Some providers might give you some transponder or LNB valeus which you can enter here.
the channel package. Manual Channel Update I cannot remove a satellite You can always start an channel update yourself. • Subscription packages do not allow removing a satellite. To remove the satellite, you have to do a complete installation again and select another package. To start a channel update manually… 1 - Press , select All Settings and press OK. 2 - Select Channels > Antenna/Cable Installation and press OK. 3 - Enter your PIN code if necessary. 4 - Select Search for Channels and press OK.
1 - Press , select All Settings and press OK. 2 - Select General Settings > Reinstall TV and press OK. 3 - Enter your PIN code if necessary. 4 - Select Yes and press OK to confirm. 5 - The TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minutes. 6 - Press (left) to go back one step or press BACK to close the menu. Frequency Scan Select the method of searching for channels.
4 - Select Digital: Reception Test and press OK. 5 - Select Search and press OK. The digital frequency is shown for this channel. 6 - Select Search again and press OK to check the signal quality of this frequency. The test result is shown on screen. You can reposition the antenna or check the connections to possibly improve the reception. 7 - You can also change the frequency yourself. Select the frequency number one by one and use the (up) or (down) keys to change the value.
Now you can upload the copied channel list onto another Philips TV. select All Settings and press OK. 4 - Select Channels > Channel List Copy > Copy to TV and press OK. Enter your PIN code if necessary. 5 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive. Channel List Version Check the current version of the channel list... 1 - Press , select All Settings and press OK. 2 - Select Channels and press (right) to enter the menu.
5 - Select Copy to USB and press OK. You might be asked to enter the Child Lock PIN code to copy the channel list. 6 - When copying is done, unplug the USB flash drive. 7 - Press (left) repeatedly if necessary, to close the menu. reinstallation. See chapter Reinstall All Channels and start the installation. Select the correct country and skip the channels search. Finish the installation. When done, continue with step 2. 2 - Plug in the USB flash drive that holds the channel list of the other TV.
signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management). 6 Connect Devices 6.1 HDMI ARC About Connections All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). Connectivity Guide If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV.
accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection. Contact a digital TV operator for more information on terms & conditions. HDMI CEC - EasyLink An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.
Settings > Sound > Advanced > Digital Ou t Format. 6.3 No sound Home Theatre System - HTS If you cannot hear the sound from the TV on your Home Theatre System, check if you connected the HDMI cable to an HDMI ARC connection on the Home Theatre System. All HDMI connections on the TV are HDMI ARC connections. Connect with HDMI ARC Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. 6.
Select a Device To select a wireless device… 1 - Press , select All Settings and press OK. 2 - Select Wireless and Networks and press OK. 3 - Select Bluetooth > Search for a device and press OK. 4 - In the list, select the wireless device and press OK. 5 - Press (left) repeatedly if necessary, to close the menu. Remove a Device You can connect or disconnect a wireless Bluetooth device. You can also remove a wireless Bluetooth device. If you remove a Bluetooth device, the device will be unpaired. 6.
6.9 6.10 Game Console USB Hard Drive HDMI What You Need For best quality, connect the game console with a High speed HDMI cable to the TV. If you connect a USB Hard Drive, you can pause or record digital TV broadcasts (DVB broadcasts or similar). Minimum Disk Space • To Pause To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 4GB disk space. • To Record To pause and record a broadcast, you need a minimum of 250GB disk space.
key Keywords and look up Recording, or Apps. Pause TV, 6.11 USB Keyboard Connect Connect a USB keyboard (USB-HID type) to enter text on your TV. Use one of the USB connections to connect. Configure Warning Install the keyboard The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings.
content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. 6.12 USB Flash Drive Ultra HD on USB You can view photos or play your music and videos from a connected USB flash drive. You can view photos in Ultra HD resolution from a connected USB device or flash drive. The TV will downscale the resolution to Ultra HD if the resolution of the photo is higher. You cannot play a native Ultra HD video on any of the USB connections.
Connect You can connect your computer to the TV and use the TV as a PC monitor. With HDMI Use an HDMI cable to connect the computer to the TV. With DVI to HDMI Alternatively, you can use a DVI to HDMI adapter (sold separately) to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. Ideal Setting If you connect a computer, we advice you to give the connection, on which the computer is connected, the correct device type name in the Source menu.
devices in your wireless network that use the WEP security encryption system, you cannot use WPS. 7 Connect your Android TV 1 - Go to the router, press the WPS button and return to the TV within 2 minutes. 2 - Select Connect to make the connection. 3 - A message will be shown when the connection is successful. 7.1 Network and Internet Make the Connection - WPS with PIN Code Home Network (TV menu) > Settings > Wireless and Networks > Wired or Wi-Fi > Connect to Network > WPS with PIN Code.
Wired Connection Network Configuration - Static IP Configuration What You Need (TV menu) > Settings > Networks > Wired or Wi-Fi > Network Configuration > Static IP Configuration. To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet. 1 - Select Static IP Configuration and configure the connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2.
7.2 Google Account Sign In To enjoy the full capabilities of your Philips Android TV, you can sign in to Google with your Google Account. By signing in you'll be able to play your favourite games across phone, tablet and TV. You'll also get customised video and music recommendations on your TV home screen as well as access to YouTube, Google Play and other apps. Sign In Use your existing Google Account to sign in to Google on your TV. A Google Account consists of an email address and a password.
8 repeatedly or press EXIT. Apps Some Google Play products and features aren't available in all countries. 8.1 Find more information on support.google.com/androidtv About Apps You can find all installed apps in the Apps section of the Home menu. Music Like apps on your smartphone or tablet, the apps on your TV offer specific functions for an enriched TV experience. Apps like YouTube, games, video stores or weather forecasts (a.o.). You can use the Internet app to surf the Internet.
Games and press OK. 3 - Select a game to play or select a new game to install and press OK. 4 - When done, press BACK repeatedly or press EXIT or stop the app with its dedicated exit/stop button. Payments To make a payment on Google Play on TV, you must add a form of payment - a credit card (outside the United States) - to your Google Account. When you purchase a movie or TV show, you will be charged on this credit card.
Lock Apps • Purchase through Google Play Movies & TV, nor Google Play Games • Use third-party apps that don't use the Google signin About App Locks With the TV switched to a restricted profile you can… 8.5 • Watch content already rented or purchased from Google Play Movies & TV • Play games already purchased and installed from Google Play Games • Access the following settings: Wi-Fi network, Speech and Accessibility • Add Bluetooth accessories You can lock apps unsuited for children.
Exit To exit the restricted profile… 1 - Press HOME, scroll down to Settings and scroll far right. 2 - Select Restricted Profile and press OK. 3 - Select Exit restricted profile and press OK. 4 - Enter the PIN code. The TV will exit the restricted profile. 8.6 Manage Apps If you stop an app and return to the Home menu, the app is not really stopped. The app is still running in the background to be readily available when you start it again.
9 Internet 9.1 Start Internet You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen. • Some plug-ins (e.g. to view pages or videos) are not available on your TV. • You cannot send or download files. • Internet pages are shown one page at a time and full screen. To start the Internet browser… 1 - Press HOME. 2 - Scroll down and select Apps > Internet and press OK. 3 - Enter an Internet address and select , press OK.
10 TV Menu 10.1 About TV Menu If the TV cannot be connected with the Internet, you can use the TV Menu as your Home menu. In the TV Menu, you will find every TV function. 10.2 Open TV Menu To open TV Menu and open an item… 1 - Press to open TV Menu. 2 - Select an item and press OK to open or start it. 3 - Press BACK to close TV Menu without starting anything.
11 11.3 Sources Device Name and Type When you connect a new device to the TV and the TV detects the device, you can assign an icon that fits the device type. If you connect a device with an HDMI cable and HDMI CEC, the TV detects the device type automatically and the device gets an appropriate icon. 11.1 Switch to a device From the list of Sources, you can switch to any of the connected devices.
Sources menu.
12 Networks 12.1 Network For more information, in Help, press the colour key Keywords and look up Network, for more information on connecting the TV to a network. 12.2 Bluetooth Pairing a Device For more information, in Help, press the colour key Keywords and look up Bluetooth, Pairing for more information on pairing wireless devices.
colour saturation value of the picture. 13 Settings Adjust the picture contrast 13.1 (TV menu) > Picture Press the arrows (up) or (down) to adjust the contrast value of the picture. Picture Settings You can decrease contrast value to reduce power consumption. Settings > Picture > Contrast. Picture Style Select a style (TV menu) > style. Adjust the picture sharpness Settings > Picture > Picture (TV menu) > For easy picture adjustment, you can select a preset picture style.
colours. all to reset all value to default. Select the preset colour temperature RGB only mode (TV menu) > Settings > Picture > Advanced > Colour > Colour temp erature. (TV menu) > Settings > Picture > Advanced > Colour > RGB only mode. Select Normal, Warm, or Cool to set the colour temperature for your preference. Select Red, Green, or Blue to switch picture as selected colour only, or select Off to turn off RGB mode.
higher level of contrast between lighter and darker parts. HDR upscaling keeps colours rich and saturated. Ultra Resolution (TV menu) > Settings > Picture > Advanced > Sharpness > Ult ra Resolution. Note: • Available when SDR (Standard Dynamic Range) signal is detected. • Not available when video content is supported HDR. Select On to have a superior sharpness in line edges and details. HDR Perfect Picture Clean (TV menu) > Settings > Picture > Advanced > Contrast > HDR Perfect.
stopped and will be restarted automatically when the TV switches to standby at a later time. While processing, a white line may appear on the screen. This is normal when clearing on-screen image retention. Natural Motion (TV menu) > Settings > Picture > Advanced > Motion > Natur al Motion. Natural Motion makes any movement smooth and fluent. Picture Format Select Maximum, Medium, or Minimum to have different degress for reducing the motion judder, visible in movies on TV.
1 - Press , select All Settings and press OK. 2 - Select Picture and press (right) to enter the menu. 3 - Select Quick Picture Setting, and press OK. 4 - Use the navigation keys to select your choice. 5 - Press (left) repeatedly if necessary, to close the menu. volume of a connected headphone separately. 13.2 Advanced Sound Settings Sound Volume Control Sound Style Auto volume levelling Switch on surround sound effect (TV menu) > sound > On.
menu) > Settings > Sound > Advanced > Digital out offset. Select On to improve the sound for speech. Ideal for news programmes. If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is 60ms.
Ambilight + Hue Follow Audio Configure (TV menu) > Settings > Ambilight > Ambilight style > Follow audio. (TV menu) > Settings > Ambilight > Ambilight+hue > Configure. Select one of the styles that follow the dynamics of the sound.
surrounding light darkens. The built-in light sensor automatically adjusts the picture, to the lighting conditions of the room. Advanced Ambilight Settings Neutralise the influence of a coloured wall on the Set TV switch off timer Ambilight colours (TV menu) > Settings > Eco settings > Switch off timer. (TV menu) > Settings > Ambilight > Advanced > Wall colour. Press the arrows (up) or (down) to adjust the value. The value 0 (Off) deactivates the automatic switch off.
property of their respective owners. 2 - Switch on the USB Hard Drive and the TV. 3 - Select Recordings if you want to perform Pause TV and Recordings, otherwise, select Apps to store apps. Follow the instructions on screen. 4 - All files and data will be removed after formatting. 5 - When the USB Hard Drive is formatted, leave it connected permanently. HDMI Ultra HD Connect the HDMI device and play Ultra HD signal on your TV, might not work correctly or show distorted picture or sound.
Shop mode is for in-store promotion. 13.6 Adjust shop settings Clock, Region, and Language Settings (TV menu) > Settings > General settings > Shop setup. Language (TV menu) > Settings > Region and language > Language. TV Guide The TV Guide receives information (data) from broadcasters or from the Internet. The TV can collect TV Guide information for the channels that are installed on the TV.
(TV menu) > Settings > Region and language > Clock > Auto clock mode. 13.8 Universal Access Settings • The standard setting for the TV clock is Automatic. The time information comes from the broadcasted UTC - Coordinated Universal Time information. • If the clock is not correct, you can set the TV clock to Country dependent. (TV menu) > Settings > Universal access. With Universal Access switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people.
Set Code and Change Code Lock for CAM Set new code or reset change code Set CAM PIN for recording (TV menu) > Settings > Child lock > Set code, Change code. (TV menu) > PIN. The child lock code is used to lock or unlock channels or programmes. Note: If you forgot your PIN code, you can override the current code use 8888 and enter a new code. Lock for Programme Set a minumum age to watch rated programmes (TV menu) > Settings > Child lock > Parental rating.
14 14.3 Videos, Photos and Music Most Popular Menu and Last Played Menu View most popular files or clear the list 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and select Most popular. 3 - Select one of the file and press OK to view files or press Clear all to clear the list. 14.1 From a Computer or NAS You can view your photos or play your music and videos from a computer or a NAS (Network Attached Storage) in your home network.
8 - Shuffle: play your files in a random order 9 - Repeat: plays all videos in this folder once or continuously 14.5 Play your Videos * If INFO key is available on your remote control Play Videos Open video folder 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and press (right) to select the USB device you need. 3 - Select Videos, you can press Mark favourite to add the video folder to favourite menu - Favourites. Video Options Browse video files...
- Favourites. 4 - You can quickly find a music using classification - Genres, Artists, Albums, Tracks. Play music 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and press (right) to select the USB device you need. 3 - Select Music and select one of classifications to view music files. 4 - Select a music and you can press Play all to play all files in the folder or press Mark favourite to add the selected music to favourite menu - Favourites.
• Info – Show music information 59
Internet or vice versa. The TV might have switched to From the Internet automatically. To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. 15 TV Guide 15.1 What You Need 15.3 With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
2 - Press the colour key Record . 3 - Press BACK to close the menu. To clear a reminder… 1 - Press TV GUIDE and select a programme with the reminder. 2 - Press the colour key Clear Reminder and press OK. 3 - Press BACK to close the menu. To cancel a recording… 1 - Press TV GUIDE and select the programme set for recording. 2 - Press the colour key Clear Recording . 3 - Press BACK to close the menu. * See chapter Recording and Pause TV for more information.
16 Schedule a Recording Recording and Pause TV You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme… 16.1 1 - Press TV GUIDE. 2 - On the TV Guide, select the channel and programme you wish to record. Press (right) or (left) to scroll through the programmes of a channel. Use the colour key Day to select the day you need.
or both scheduled recordings. recordings and reminders. To adjust the start or end time of a scheduled recording… Watch a Recording 1 - Press TV GUIDE. 2 - Press the colour key Recordings . 3 - At the top of the screen, select Scheduled and press OK. 4 - In the list of scheduled recordings and reminders, select the tab Recordings and press OK to view the scheduled recordings only.
press (Stop). Replay Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. To replay a current broadcast… 1 - Press (Pause) 2 - Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed. At one point you will reach the start of the broadcast storage or the maximum time span. 3 - Press (Play) to watch the broadcast again.
17 Cast to Your TV Smartphones and Tablets To cast an app to the TV screen… Philips TV Remote App 1 - On your smartphone or tablet, open an app that supports Google Cast. 2 - Tab the Google Cast icon. 3 - Select the TV you would like to cast to. 4 - Press play on your smartphone or tablet. What you selected should start playing on TV. The new Philips TV Remote App on your smartphone or tablet is your new TV buddy. 17.3 17.1 With the TV Remote App, you master your media around you.
Dependent. • you must accept the Terms of Use (You might have accepted already when you connected to the Internet.). 18 Top Picks The icon will only appear at the top of the screen when Now on TV is available. 18.1 About Top Picks The TV does not store former recommendations.
Using TV on Demand You can select a specific video store if more than one is available. To open TV on Demand… To rent a movie… 1 - Press TOP PICKS to open the Top Picks menu. 2 - Select TV on Demand at the top of the screen and press OK. 3 - Press (down) to open the page full screen. 4 - You can select a specific broadcaster if more than one is available. 5 - Select a programme icon and press OK to start watching. 6 - Press BACK to close. 1 - Navigate the highlight on a movie poster.
19 Home Menu 19.1 Open the Home Menu To open the Home menu and open an item… 1 - Press HOME. 2 - Select an item and press OK to open or start it. 3 - Press BACK to close the Home menu without starting anything. 19.2 Restricted Profile You can restrict the use of certain apps by switching the TV to a restricted profile. This restricted profile will only allow the use of apps which you have selected. You can only switch out of this profile with a PIN code.
20 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. In your region, Netflix might only come available with future software updates. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
21 identification file is written on the USB flash drive. Software Download the software 1 - Insert the USB flash drive into your computer. 2 - On the USB flash drive, locate the file update.htm and double click it. 3 - Click Send ID. 4 - If new software is available, download the .zip file. 5 - After the download, unzip the file and copy the file autorun.upg onto the USB flash drive. Do not place this file in a folder. 21.
(http://source.android.com/source/licenses.html) This includes all external sources used by offical Android AOSP. 21.4 Open Source Software This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences. linux kernel (3.10.79) This tv contains the Linux Kernel.
other dealingsin this Software without prior written authorization of the copyright holder. functions for handling PNG images. It supports almost all of PNG's features, is extensible.The original download site for this software is : https://github.com/julienr/libpng-androidlibpng license libfreetype (2.4.
supports major Internet transport, data format, and service description standards like HTTP and HTTPS, SMTP, XML, JSON, Atom, and WADL.The original download site for this software is : http://restlet.orgThis piece of software is made available under the terms and conditions of the Apache License version 2. Live555 provides RTP/RTCP/RTSP client.The original download site for this software is : http://www.live555.comThis piece of software is made available under the terms and conditions of the LGPL v2.
Public License. You are allowed * to change and copy the emx library sources if you keep the copyright * message intact. If you improve the emx libraries, please send your * enhancements to the emx author (you should copyright your * enhancements similar to the existing emx libraries). Opera Web Browser (SDK 3.5) This TV contains Opera Browser Software. dlmalloc (2.7.2) Opera uses Doug Lea's memory allocatorThe original download site for this software is : http://gee.cs.oswego.edu/dl/html/malloc.
loss that results from the download and use of the Software and Document in any manner whatsoever.8. In relation to the Software and Document, HKSARG hereby disclaims all warranties and conditions, including all implied warranties and conditions of merchantability, fitness for a particular purpose and non-infringement.9.
beinfringed only as a consequence of further modification of thisimplementation.
outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.
If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. that forbid distributors to deny you these rights or to ask you to surrender these rights.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library. in the Library will not necessarily be able to recompile the application to use the modified definitions.) ?b) Use a suitable shared library mechanism for linking with the Library.
the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
for use, reproduction, to the work and distribution as defined by Sections 1 through 9 of this document. (an example is provided in the Appendix below). "Licensor" shall mean the copyright owner or entity authorized by "Derivative Works" shall mean any work, whether in Source or Object the copyright owner that is granting the License.
received by Licensor and Work or Derivative Works thereof in any medium, with or without subsequently incorporated within the Work. modifications, and in Source or Object form, provided that You 2. Grant of Copyright License.
Your own attribution Contributor provides its Contributions) on an "AS IS" BASIS, notices within Derivative Works that You distribute, alongside WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or or as an addendum to the NOTICE text from the Work, provided implied, including, without limitation, any warranties or conditions that such additional attribution notices cannot be construed of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A as modifying the License.
on Your own behalf and on Your sole responsibility, not on behalf WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. of any other Contributor, and only if You agree to indemnify, See the License for the specific language governing permissions and defend, and hold each Contributor harmless for any liability limitations under the License. incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
Eric S. Raymond libpng versions 0.5, May 1995, through 0.88, January 1996, are Gilles Vollant Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. and with the following additions to the disclaimer: For the purposes of this copyright and license, "Contributing Authors" There is no warranty against interference with your enjoyment of the is defined as the following set of individuals: library or against infringement.
products. If you use this source code in a product, acknowledgment is not required but would be Introduction ============ The FreeType Project is distributed in several archive packages; A "png_get_copyright" function is available, for convenient use in "about" some of them may contain, in addition to the FreeType font engine, boxes and the like: various tools and contributions which rely on, or relate to, the printf("%s",png_get_copyright(NULL)); FreeType Project.
We specifically permit and encourage the inclusion of this code as well as linking it to form a `program' or `executable'. software, with or without modifications, in commercial products. This program is referred to as `a program using the FreeType We disclaim all warranties covering The FreeType Project and engine'. assume no liability related to The FreeType Project.
and object code following phrases to refer to this software in your documentation forms) and derivative works thereof for any purpose; and to or advertising materials: `FreeType Project', `FreeType Engine', authorize others to exercise some or all of the rights granted `FreeType library', or `FreeType Distribution'. herein, subject to the following conditions: As you have not signed this license, you are not required to o Redistribution of source code must retain this license file accept it.
as the Initial Developer in the Source Code notice required by Exhibit --- end of FTL.TXT --- A. 1.7. "Larger Work" means a work which combines Covered Code or _____________________________ MOZILLA PUBLIC portions thereof with code not governed by the terms of this License. LICENSE Version 1.1 1.8. "License" means this document. --------------1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or 1.0.1.
and apparatus claims, in any patent Licensable by grantor. (a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, 1.11.
created by such Contributor (or portions thereof) either on an 3.1. Application of License. The Modifications which You create or to which You contribute are unmodified basis, with other Modifications, as Covered Code governed by the terms of this License, including without limitation and/or as part of a Larger Work; and Section 2.2.
You must cause all Covered Code to which You contribute to contain a interface and Contributor has knowledge of patent licenses which file documenting the changes You made to create that Covered Code and are reasonably necessary to implement that API, Contributor must the date of any change. You must include a prominent statement that also include this information in the LEGAL file.
indemnify the Initial terms You offer. Developer and every Contributor for any liability incurred by the 3.7. Larger Works. Initial Developer or such Contributor as a result of warranty, You may create a Larger Work by combining Covered Code with other code support, indemnity or liability terms You offer. not governed by the terms of this License and distribute the Larger 3.6. Distribution of Executable Versions. Work as a single product.
6.2. Effect of New Versions. PERFORMANCE OF THE COVERED CODE Once Covered Code has been published under a particular version of the IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, License, You may always continue to use it under the terms of that YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE version. You may also choose to use such Covered Code under the terms COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
royalty for Your past and future use of Modifications made by such which have been validly granted by You or any distributor hereunder Participant, or (ii) withdraw Your litigation claim with respect to prior to termination shall survive termination. the Contributor Version against such Participant.
herein is intended or shall be deemed to constitute any admission of liability. This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be Initial Developer may designate portions of the Covered Code as unenforceable, such provision shall be reformed only to the extent "Multiple-Licensed". "Multiple-Licensed" means that the Initial necessary to make it enforceable.
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License.
22 Specifications 22.1 Please inform yourself about the local separate collection system for electrical and electronic products. Environmental Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. European Energy Label The European Energy Label informs you on the energy efficiency class of this product.
• 1280 x 1024p - 60 Hz • 1920 x 1080p - 60 Hz • 3840 x 2160p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz 22.
• Image Codecs : JPEG • Limitations : – Maximum supported total bit rate for a media file is 30Mbps. – Maximum supported video bit rate for a media file is 20Mbps. – MPEG-4 AVC (H.264) is supported up to High Profile @ L5.1. – H.265 (HEVC) is supported upto Main / Main 10 Profile up to Level 5.1 – VC-1 is supported up to Advanced Profile @ L3. Supported media server software (DMS) • You can use any DLNA V1.5 certified media server software (DMS class).
23 Switch On and Remote Control Help and Support The TV does not switch on • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Make sure that the power cable is securely connected. 23.
• Make sure that all cables are properly connected. • Make sure that the volume is not muted or set to zero. • Make sure that the TV audio output is connected to the audio input on the Home Theatre System. Sound should be heard from the HTS speakers. • Some devices may require you to manually enable HDMI audio output. If HDMI audio is already enabled, but you still do not hear audio, try changing the digital audio format of the device to PCM (Pulse Code Modulation).
23.4 Online Help To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/support . On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 24 Safety and Care 24.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 24.2 Screen Care • Never touch, push, rub or strike the screen with any object.
more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. 25 Terms of Use 25.1 CE compliance Hereby, TP Vision Europe B.V.
26 26.4 Copyrights Dolby Audio 26.1 Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are MHL trademarks of Dolby Laboratories. MHL MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. 26.5 DTS Premium Sound ™ DTS Premium Sound ™ For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
registrations and pending applications in other countries throughout the world. 26.8 Other Trademarks All other registered and unregistered trademarks are the property of their respective owners.
27 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index A Contrast, Perfect Contrast 46 Age Rating 11 Ambilight+hue, configuration 50 Ambilight+hue, Immersion 50 Ambilight+hue, on or off 50 Ambilight, Settings 49 Android Settings 34 Antenna connection 4 Antenna, Manual Installation 21 APP lock 37 Apps 35 Audio Language 12 Audio Language, Primary 12 Audio Language, Secondary 12 Auto Volume Levelling 48 Automatic Channel Update 19 D B G Blu-ray Disc player, connect 26 Bluetooth, Pairing 27 Bluetooth, Remove device 27 Bluetooth, Select device 27 Game C
Partially sighted 54 Pause TV 62 Photo camera, connect 30 Photos, Videos and Music 56 Picture Style 44 Picture, picture format 47 Picture, quick settings 47 Power connection 4 Power consumption check 51 Problems, Channels 102 Problems, HDMI Connection 103 Problems, Picture 103 Problems, Remote control 102 Problems, Sound 103 Problems, USB Connection 103 Product Fiche 99 Programmes, Recommendations 66 V Video on Demand 67 Viewing distance 4 W Watch TV 11 Wi-Fi 32 Wired Network 33 Wireless Network 32 R Rad
Powered by TCPDF (www.tcpdf.
