Register your product and get support at www.philips.com/support 55PFL4706 46PFL4706 40PFL4706 EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands, contact Philips Customer Care Center at 1-866-309-0841 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00 Enter below the model and serial numbers located on the back and right side of the TV cabinet.
1 Notice 2 Important Product information Screen care Environmental care Regulatory notices 3 Your TV Side controls and indicators Remote control 4 Get started Supplied accessories Stand assembly Mounting stand onto TV Positioning the TV Installing the remote control batteries Connecting the antenna or cable Managing cables Connecting the AC power cord Switching on and initial setup 5 Use your TV Switching on your TV and putting it in standby mode Switching channels Adjusting volume Watching channels from
Return your Product Registration Card or register online at www.philips.com/support today to get the very most from your purchase. Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.
1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
1 Notice Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. P&F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
• CloudTV™ (CloudTV™ by ActiveVideo ) technology provided under license from ActiveVideo Networks, Inc. U.S. and Foreign Patents apply. CloudTV™ and the “CloudTV™” logo are proprietary trademarks of ActiveVideo Networks, Inc. ® Pandora is a registered trademark of Pandora Media, Inc. • • • • Twitter is a trademark of Twitter, Inc. vTuner is a trademark of Nothing Else Matters Software, Ltd.
Remote control 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support a Side controls and indicators r b q c d f e p f e g d a b c a Ambient light sensor Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when [Active control] is set to [On with Light Sensor].
b FAV Displays a list of all channels marked as favorite. (Includes subchannels) c SLEEP Sets a delay after which the TV switches to standby. p MENU / EXIT Toggles the home menu on or off. English a . (standby-On) Switches the TV on or puts it in standby mode. The TV is not powered off completely unless it is physically unplugged. q AUTO MODE Cycles through preset picture and sound settings. (See ‘Using auto mode’ on page 23.
4 Get started Positioning the TV Warning • Do not insert the AC power cord into the power socket outlet before all the Supplied accessories • • • • • Remote Control AC Power cord User Manual Box-inserts Double sems screws connections are made. • • • • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. • Before you move the TV, disconnect attached cables to prevent damage to connectors. 2 x AAA, 1.
Connecting the antenna or cable If you connect a set-top box through RF IN / OUT English If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specified by the service provider. cable antenna antenna RF cable OUT IN set-top box IN OUT RF cable IN If you connect to an antenna Any DTV programs that are broadcast in your area can be received for free through an antenna connection.
Managing cables Route your antenna cable and all other cables through the cable management tie at the back of the TV. The holder helps keep your cables tidy and easily manageable. 1 Attach the cable management tie as illustrated below. Connecting the AC power cord Warning • Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. 1 2 3 Locate the power connector at the back of the TV.
Before you switch on the TV, check that the AC power cord is properly connected. Press . POWER at the right side of the TV, or press . (standby-On) on the remote control. The TV normally takes 25-30 seconds to start up and the following screen appears the first time you turn on the TV. After you read a welcome screen, follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 20 minutes.
5 Use your TV Switching channels This section helps you perform basic TV operations. Switching on your TV and putting it in standby mode To switch on • Press . POWER at the side of the TV or press . (standby-On) on the remote control. To switch to standby • Press . POWER at the side of the TV or press . (standby-On) on the remote control again. Note • Energy consumption contributes to air and water pollution. When the AC power cord is plugged in, your TV consumes energy.
1 2 Press SOURCE repeatedly to select the set-top box and wait a few seconds for the picture to appear. English Adjusting volume Use the remote control of your set-top box to select channels. Watching connected devices To watch connected devices 1 2 Switch on the connected device. » The picture from your connected device might appear automatically on the TV screen. Use the remote control of the device to select channels.
6 Use more of your TV Lock or unlock your device from the home menu Access TV menus 1 2 3 4 Menus help you to install channels, change picture and sound settings then access other features. Access the home menu The home menu gives you easy access to connected devices, picture and sound settings as well as other useful features. This section describes how to lock or unlock specified device. 5 Press MENU on the remote control. Use Î/ï/Í /Æ to select a device to lock or unlock.
You can enjoy your TV as a PC monitor wirelessly using your home network. Make sure you download the Philips Wireless MediaConnect software and install it on your PC before you perform the steps below. Install Philips Wireless MediaConnect 1 2 3 4 5 Press MENU on the remote control and then use Î/ï/Í /Æ to select [Setup] > [Software] > [MediaConnect code]. • Write down the 12-digit code displayed on the screen. You will need this to download MediaConnect software.
Guide to DLNA Listen to music using DLNA 2 Server 1 Audio Server 2 Photos Server 3 Video 1 1 2 3 4 Folder Hig ghwa hwayy B luess lue Highway Blues Video10 Blue hills Title: ... Album: ... Duration: 00:03:41 Year: 5 Press Î/ï to select a file or a folder. Press OK or ÆΔ to play the selected files. • Press OK or ÆΔ to pause, press OK or ÆΔ again to resume. • Press ∫ to skip up the next file. • Press ¢ to skip down the previous file. • Press Ê to stop playback.
Enjoying internet radio with vTuner Net TV offers Internet services for your TV. Use the TV remote control to browse the Net TV Internet pages. You can play movies, listen to music and much more, all from your TV screen. - Because Net TV is an online system, it can be modified over time to better serve its purpose. - Some Net TV services can be added, changed or stopped after some time. - You cannot download and save files or install plug-ins.
Guide to the playback screen Add stations on the vTuner website e.g.) Location You can add stations which are not in the vTuner station list. 1 1 2 Jazz(3) FM 76.2 FM 6 5 Jazz jAzz jaZz jazZ Schonan Beach FM 78.
By entering your favorite artists or songs, Pandora selects music and creates a new station for you on the basis of the entered information. 1 2 3 4 5 On the player screen, press Color buttons (blue) to display station list. Press Color buttons ( yellow ) to call up the [Tool Menu]. Use Î/ï to select [Create a new station], then press OK. Enter a name of your favorite artist or song, then press OK while [OK] is selected. • Search result will appear on the right side of the TV screen.
Guide to Twitter menu screen Displaying Mentions on Twitter Twitter Home Screen Your TV displays replies for the logged in user. Twitter Home Screen consolidates browsing of tweets and some functional menus for Twitter. To call up the screen, press NET TV on the remote control and then use Î/ï/Í /Æ to select [ Twitter]. 1 2 Single View 2 Home 1 List Menu Viewing channel Timeline Operation guide Viewing Lists on Twitter 1 2 Mentions 1 2 3 4 Use Î/ï to select [Mentions], then press OK.
You must set [Home] in [ Location]. (Refer to page 29.) Otherwise, personalized picture and sound settings will not be memorized after the unit goes to standby mode. Setting items Color enhancement Active control Changing picture settings Description Off Sets Color enhancement to off. On Makes colors more vivid bright colors. Off Sets Active control to off.
Changing picture format 1 2 For 4:3 video signal Press FORMAT on the remote control. [Automatic] [Super zoom] [4:3] [Wide screen] [Movie expand 16:9] [Movie expand 14:9] Use Î/ï to select a picture format and press OK to confirm your choice. Summary of picture formats Display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.
Setting items Use a VGA connector to connect a PC to your TV. For sound, add an audio cable with a stereo mini jack. Description Off SRS TruSurround HD On Off Caution • Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Create or edit a list of favorite channels Setting the time manually 1 1 2 3 4 5 6 Press FAV on the remote control to display your lists of favorite channels. Use Î/ï to highlight a list, and then press OK to select the list. Press OPTIONS to enter edit mode. » A list of channels is shown. Use Î/ï to highlight a channel. Press OK to select or deselect the highlighted channel. » The channel is added to or removed from the list of favorite channels. Press MENU to exit.
If you have difficulties viewing closed captions on DTV programming, including HDTV, received from your subscription television provider, you should : • consult any consumer information and manuals / guides on closed captions for DTV programming provided by your subscription television provider; • ensure that the captioning function on your set-top box, if applicable, is turned on; and, • ensure that the captioning function on your DTV is turned on.
Locking a channel or input source This section describes how to lock input sources or specified channels. The channels can be selected but the screen is blanked out and the audio is muted. 1 2 3 Press MENU on the remote control and then use Î/ï/Í /Æ to select [Setup] > [Features] > [Child lock]. Enter your PIN. (See ‘Setting your PIN’ on page 25.) Use Î/ï to select [Channel Lock], then press OK.
Summary of Canada English ratings lock You can control viewing of movies based on their MPAA (Motion Picture Association of America) rating. Rating Description All E C All items in the ratings list are locked. Exempt program. Programming suitable for children under the age of 8 years. No profanity or sexual content of any level allowed. Minimal comedic violence. Suitable for children ages 8 and over. Low intensity violence and fantasy horror allowed. Movies with a mild content, suitable for all ages.
Use Philips EasyLink EasyLink Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected via an HDMI connector. This function allows you to operate the linked functions between our brand devices with EasyLink capabilities and this unit connected via a HDMI cable. One-touch play When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control.
You can set the location of your TV to [Home] or [Retail store]. Choosing [Home] gives you full flexibility to change predefined settings for picture and sound. 1 2 3 Press MENU on the remote control and then use Î/ï/Í /Æ to select [Setup] > [Installation] > [Preferences] > [Location]. Select [Home] and then press OK to confirm your choice. Press MENU to exit. Note • You must set [Home]. Otherwise, personalized picture and sound settings will not be memorized after the unit goes to standby mode.
Wireless network This menu is displayed only when you set [Wireless] in [Network selection]. In order to use a wireless network, you must set up a connection to the Wireless LAN Access Point (AP) (e.g. wireless router). Wireless network setting (Manually enter your SSID) Set up the connection to the Wireless LAN Access Point (AP) (e.g. wireless router) manually by entering the wireless network name (SSID).
Description Setting status Primary DNS *2, 3 A server which handles the name and IP address over the internet. You can check the status of network settings. Secondary DNS *2, 3 A server which handles the name and IP address over the internet. MAC address An address which recognizes the devices connecting to the network. It is also called Hardware Address. *1 Items can be selected only when [IP setting mode] is set to [Manual].
View photos and play music, and watch videos on a USB storage device Caution • This unit accepts USB flash memory only. Other storage devices such as external HDD • by USB bus power will not work. Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device. Your TV is fitted with a USB connection that enables you to view photos or listen to music stored on a USB storage device.
Listen to music on a USB storage device Watch your Video on a USB storage device 1 2 1 2 Track1.mp3 Trac Tr ack1 k1.m .mp3 p p3 Picture In the USB content browser, use Î/ï to select [Video]. Press Î/ï to select a file or a folder on the USB storage device. Video1.avi Vide Vi deo1 o1.a .avi vi Picture Video2.mpg Track2.mp3 Music Music Video 3 Setting items Shuffle Description Off Sets repeat playback to off. On Sets repeat playback for all MP3 files in the current folder.
7 Install channels Weak channel installation The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to reinstall and fine-tune channels. Press MENU on the remote control and then use Î/ï/Í /Æ to select [Setup] > [Installation] > [Language].
Philips continuously tries to improve its products and we strongly recommend that you update the TV software when updates are available. New software can be downloaded from our website at www.philips.com/support using the model number of your TV (e.g. 55PFL4706) to find information. Updating software English 8 Update your TV software USB update You can update the software by using USB storage device. 1 2 If the TV is on, press . POWER at the side of the TV.
Network update You can update the software by connecting the unit to the internet. 1 2 3 4 5 6 Follow steps 1 to 2 in ‘Connection test’ on page 29. Press MENU on the remote control and then use Î/ï/ Í /Æ to select [Setup] > [Software] > [Software update] > [Network]. Use Í /Æ to select [Yes], then press OK. • This unit will then start checking for the latest firmware version. Confirmation message will appear. Use Í /Æ to select [Yes], then press OK.
English 9 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Guide. Connection overview * a i ** j b c k d l e f g h a Ethernet port For internet connection using an Ethernet cable with a RJ-45 connector. i USB terminal Data input from USB storage devices only. Do not connect any device to this terminal such as; digital camera, keyboard, mouse, etc.
Selecting your connection quality Connecting your devices HDMI - Highest quality This section describes how to connect a selection of devices with different connectors. Different types of connectors can be used to connect a device to your TV. The following sections describe examples only, other configurations are possible. Connecting a set-top box, Blu-ray Disc player and HD game console via HDMI HDMI OUT set-top box Supports high-definition signals and gives highest picture and sound quality.
Connecting a set-top box, DVD recorder via composite connectors and analog audio audio L/R + video OUT IN IN HDMI 1 IN only DVD recorder HDMI ARC digital home theater amplifier RF IN OUT HDMI cable RF OUT Note • The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital audio to an HDMI Home Theater System. set-top box RF IN Do not place your recorder too close to the screen because some recorders can be susceptible to signals.
Connecting the TV to the internet using an Ethernet cable LAN 1 2 3 Connecting a digital home theater amplifier using a digital audio coaxial cable WAN 4 5 hub or broadband router OUT Ethernet cable DIGITAL AUDIO internet LAN IN telecommunications equipment (modem, etc.) Ethernet cable digital home theater amplifier Note • Please purchase shielded Ethernet cables at your local store and use them when you • • • • • • connect to network equipment.
Add devices If you connect a PC with a VGA connector at the back. After connecting devices, assign the device attached to each connector. This allows you to easily identify devices connected to your TV. 1 AUDIO IN IN 2 3 4 AUDIO OUT Press MENU on the remote control and then use Î/ï/Í /Æ to select [Add new devices]. Use Í /Æ to select [Start], then press OK. Use Î/ï to select a device and press OK. Use Î/ï to select the connector your device is connected to and press OK.
10 Troubleshooting Problem Possible cause and solution No power or indicator light. The TV is not connected to the power. Press . POWER at the side of the TV or on the remote control. Ensure that the AC power cord is connected tightly to the TV power connector and to the power socket outlet. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect the AC power cord. Connect the TV to a different power socket outlet. No picture or sound is HDCP authentication fail.
Connections Component video input with audio L/R : Note • Specifications are subject to change without prior notice.
12 Warranty LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
A Antenna, connect Audio Audio setting Auto mode Auto TV on Auto volume leveling B Blockbuster N Netflix Network 9 23 23 23 28 23 D Device List Device lock E EasyLink ENERGY STAR® Environmental care Equalizer F FAV Film Fresh H Home mode I Initial setup L Location (Retail store or Home) M Master EasyLink Mounting stand onto TV Pandora PC Philips Wireless MediaConnect Picture format Picture settings R 17 C Cables component composite connection quality HDMI manage cables YPbPr Channels
License This section describes software license used for this product. This product uses some open source software: GPL software: linux, gcc, binutils, busybox, dhcpcd LGPL software: directfb, glibc, Qt, LiTE BSD: WPA Supplicant MIT: expat, lua, lua-xmlreader, lua-slncrypto, libxml2, c-ares Free Type, LibJPEG, Open SSL, JSON_Parser, gSOAP, libcurl, Open GL GPL The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
3. 4. 5. 6. 7. 8. III In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker.
gSOAP gSOAP Public License Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved. THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
10. LIMITATION OF LIABILITY.
P&F USA, Inc. PO Box 430 Daleville, IN 47334-0430 P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura, Huixquilucan Edo. de México C.P. 52787 TELEVISOR A COLOR DE CRISTAL LIQUIDO (LCD) MODELO LCD IMAGEN VISIBLE ENERGIA 55PFL4706/ F7 55”(139,70cm) 138,78cm 120V ~ 60Hz 195W 46PFL4706/ F7 46”(116,84cm) 116,81cm 120V ~ 60Hz 150W Comercializado por : P&F MEXICANA, S.A. DE C.V. IMPORTADOR : SOJITZ MEXICANA, S.A. DE C.V. Av. Paseo de las Palmas No. 239-302 Col.
