Projection Television 55P8241 60P8241 55P8288 60P8288 3135 035 20203
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
TABLE OF CONTENTS GETTING STARTED SOUND MENU Welcome/Product Registration . . . . . . . . . . . . . . . .2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Adjusting the Treble, Bass, and Balance . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Using the AVL (Audio Volume Leveler) Control . . . . . . . . . . . . . . . . . . . . . . .
FEATURES Audio/Video Jack Panel allows direct connections with VCRs, DVDs, or other accessory devices, providing quality TV picture and sound playback. Audio Volume Leveler (AVL) Control keeps the TV sound at an even level. Peaks and valleys that occur during program changes or commercial breaks are reduced, making for a more consistent, comfortable sound.
Picture Menu • Adjusting the Picture ADJUSTING THE PICTURE T o adjust your TV picture controls, select a channel and follow these steps. BEGIN Press the MENU button on the remote control to show the on-screen menu. PICTURE will be highlighted. Press the CURSOR RIGHT button. BRIGHTNESS will be highlighted and an adjustment bar will be shown to the right. Press the CURSOR RIGHT or LEFT button to adjust the BRIGHTNESS level of the picture.
Picture Menu • The Dynamic Noise Reduction Control TURNING ON THE DYNAMIC NOISE REDUCTION (DNR) CONTROL B ecause of poor cable reception or other difficulties, the picture can sometimes appear slightly “speckled” (an indication of signal noise in the picture). The DNR (Dynamic Noise Reduction) control can help eliminate this type of interference and improve the quality of the picture.
Picture Menu • The ImageMax Control TURNING ON THE IMAGEMAX CONTROL I mageMax helps you sharpen the picture quality by making dark portions of the picture darker and light portions of the picture brighter. Follow these steps to turn ImageMax on. BEGIN BRIGHTNESS COLOR PICTURE SHARPNESS TINT PICTURE SOUND FEATURES INSTALL Press the MENU button on the remote control to show the on-screen menu. PICTURE will be highlighted.
Picture Menu • The Convergence Control CONVERGE RED/BLUE T he influence of magnetic fields and changes in the position of the TV may cause screen colors not to line up properly. The result on your TV screen will be red or blue colors appearing around the edges of images. PICTURE TINT COLOR TEMP DNR IMAGEMAX CONVERGENCE If various images on the entire picture have red outlines, adjust the CONVERGE RED control. Then if any red outlines remain, adjust the MULTIPOINT RED control.
Picture Menu • The Convergence Control CONVERGE MULTIPOINT RED/BLUE I f various images on the entire picture have red outlines, adjust the CONVERGE RED control. Then if any red outlines remain, adjust the MULTIPOINT RED control. PICTURE TINT COLOR TEMP DNR IMAGEMAX CONVERGENCE Likewise, if various images on the entire picture have blue outlines, adjust the CONVERGE BLUE control. Then if any blue outlines remain, adjust the MULTIPOINT BLUE control.
Picture Menu • The Convergence Control CONVERGE MULTIPOINT RED/BLUE Press the i+ button to enter the ADJUST mode. Press the CURSOR LEFT, RIGHT, UP, or DOWN button to adjust the cross image until the color outline is gone. 10 Press the i+ button to return to NAVIGATE mode. • ADJUST I+: NAVIGATE • NAVIGATE Repeat steps 7–10 until all misaligned crosses have been adjusted.
Picture Menu • The Convergence Control UNDO MULTIPOINT T he UNDO MULTIPOINT control allows you to restore the TV’s picture screen to the way it was before you made Multipoint adjustments. BEGIN Press the MENU button to show the on-screen menu. PICTURE will be highlighted. PICTURE Press the CURSOR RIGHT button to enter the PICTURE menu. TINT COLOR TEMP DNR IMAGEMAX CONVERGENCE Press the CURSOR DOWN button repeatedly until CONVERGENCE is selected.
Features Menu • The Timer Control SETTING THE CLOCK 11 BEGIN TIMER AUTOLOCK PIP CLOSED CAP FEATURES TIMER TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR DOWN button twice to highlight FEATURES. Press the CURSOR RIGHT button to enter the FEATURES menu. Press the CURSOR RIGHT button again to shift the display left and highlight the TIME control. Press the CURSOR RIGHT button again to highlight the time indicator area. Press the CURSOR UP or DOWN button to select AM or PM.
Features Menu • The Timer Control 11 12 SETTING THE START TIME 1 2 10 3 9 4 8 7 6 5 Y ou can set the TV to turn itself on at a specific time, just as you would an alarm clock. Follow these steps to set the Start Time. BEGIN Press the MENU button on the remote control to show the on-screen menu. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The Timer Control SETTING THE STOP TIME 11 BEGIN TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR DOWN button twice to highlight FEATURES. FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR RIGHT button to enter the FEATURES menu. Press the NUMBER buttons to enter the correct time. If you make a mistake entering the time, use the CURSOR LEFT or RIGHT button to move among the input slots to make corrections.
Features Menu • The Timer Control 11 12 SELECTING THE CHANNEL 1 2 10 3 9 4 8 7 6 5 Y ou can select a specific channel that the television will tune to when the timer turns the set on. Follow these steps to select the channel. BEGIN TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL Press the MENU button on the remote control to show the on-screen menu. FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The Timer Control SETTING THE ACTIVATE CONTROL 11 BEGIN TIMER AUTOLOCK PIP CLOSED CAP FEATURES Press the CURSOR RIGHT button to enter the FEATURES menu. FEATURES TIMER TIME START TIME STOP TIME CHANNEL ACTIVATE Press the CURSOR RIGHT button again. Then press the CURSOR DOWN button repeatedly until the ACTIVATE control is highlighted.
Features Menu • The Timer Control 11 12 CONSTANTLY DISPLAYING THE TIME ON SCREEN 1 2 10 3 9 4 8 7 6 5 A fter you have set the TV’s clock, you can use your TV to keep up with the time. The TIMER DISPLAY control allows you to permanently display the time in the upper right corner of the screen. BEGIN Press the MENU button on the remote to show the on-screen menu. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The AutoLock Control UNDERSTANDING AUTOLOCK he AutoLock feature can help parT ents censor what their children watch on TV. AutoLock receives content advisories sent by broadcasters or other program providers. After you program AutoLock, it can respond to the content advisories and block programs that contain content which you may consider objectionable—offensive language, violence, or sexual situations.
Features Menu • The AutoLock Control SETTING UP THE ACCESS CODE A utoLock allows parents to block channels they think children should not watch. A channel blocked by the AUTOLOCK control cannot be viewed until a correct access code is used to unlock the channel for viewing. Follow these steps to set up your Access Code.
Features Menu • The AutoLock Control BLOCKING CHANNELS A fter you have set your personal access code (see the previous page), you are ready to select the channels or program sources you want to block. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL FEATURES TIMER AUTOLOCK PIP CLOSED CAP BEGIN Press the MENU button on the remote control to show the on-screen menu. FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The AutoLock Control BLOCKING BY MOVIE RATING A fter you have set your personal access code (see page 20), you can block programs by specific movie ratings. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL BEGIN FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the MENU button on the remote control to show the on-screen menu. Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The AutoLock Control BLOCKING BY TV RATING Y ou also can block programs by specific TV ratings. Follow these simple steps. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL BEGIN FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the MENU button on the remote control to show the on-screen menu. Press the CURSOR DOWN button twice to highlight FEATURES. Press the CURSOR RIGHT button to enter the FEATURES menu.
Features Menu • The AutoLock Control TURNING THE BLOCKING CONTROL ON OR OFF T he BLOCKING control can be thought of as the “master switch” for AutoLock. Use it to turn on or off all of the settings you have chosen to block programming. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL FEATURES TIMER AUTOLOCK PIP CLOSED CAP BEGIN Press the MENU button on the remote control to show the on-screen menu.
Features Menu • The AutoLock Control BLOCKING UNRATED BROADCASTS I n addition to blocking rated programs or channels, you may also choose to block all programming that is unrated. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL FEATURES TIMER AUTOLOCK PIP CLOSED CAP BEGIN Press the MENU button on the remote control to show the on-screen menu. FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The AutoLock Control BLOCKING BROADCASTS THAT HAVE NO RATING S ome programs contain no content advisories from the Motion Picture Association of America or the television broadcasters (see page 19 for more on content advisories and ratings). To block such programs, follow these steps. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL FEATURES TIMER AUTOLOCK PIP CLOSED CAP BEGIN Press the MENU button on the remote to show the on-screen menu.
Features Menu • The AutoLock Control REVIEWING YOUR SETTINGS Y ou can access a screen that shows your AutoLock settings. MOVIE RATING R NC17 X BEGIN Press the i+ button on your remote twice. Your AutoLock settings will appear on the screen. NOTE: If you have blocked specific subratings, such as V for Violence in the TV-PG category, these blocked subratings will not appear in the review. Nonetheless, the subratings are still blocked according to your selections.
Features Menu • The AutoLock Control CLEARING ALL BLOCKED CHANNELS T he CLEAR ALL control will allow you to remove all channel blocks that have been turned on through the BLOCK CHANNEL control. To clear all channel blocks, follow the simple steps below. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL BEGIN Press the MENU button on the remote to show the on-screen menu. FEATURES TIMER AUTOLOCK PIP CLOSED CAP Press the CURSOR DOWN button twice to highlight FEATURES.
Features Menu • The Closed Captioning Control USING THE CLOSED CAPTIONING CONTROL C losed Captioning (CC) allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired, this feature uses on-screen text boxes to show dialogue and conversations while the TV program is in progress. CC SMART HELP Not all TV programs and product commercials are broadcast with Closed Captioning (CC).
Sound Menu • Treble, Bass, and Balance ADJUSTING THE TREBLE, BASS, AND BALANCE B esides the normal volume level control, your TV also has individual sound-adjustment controls. You can use TREBLE (high frequency), BASS (low frequency), and Speaker BALANCE to further adjust the sound playback of TV programs. BEGIN Press the MENU button on the remote control to show the on-screen menu. TREBLE BASS BALANCE AVL INCR.
Sound Menu • AVL (Audio Volume Leveler) USING THE AVL (AUDIO VOLUME LEVELER) CONTROL Y ou may have noticed the peaks and valleys of sound that occur between program changes or at commercial breaks. The volume levels often vary considerably. By turning on the AVL (Audio Volume Leveler) control, you can make your TV produce a more consistent volume level. Follow these steps to turn the AVL on. TREBLE BASS BALANCE AVL INCR.
Sound Menu • Incredible Surround USING INCREDIBLE SURROUND T he Incredible Surround feature will boost the TV’s sound by making the sound broader and fuller. Set the INCREDIBLE SURROUND control to INCREDIBLE SURROUND to enhance stereo programs. Or set the INCREDIBLE SURROUND control to SPATIAL to give a “surround” effect to mono programs. TREBLE BASS BALANCE AVL INCR. SURROUND PICTURE SOUND FEATURES INSTALL SOUND TREBLE BASS BALANCE AVL INCR. SURROUND 30 BEGIN SOUND TREBLE BASS BALANCE AVL INCR.
Sound Menu • Stereo and SAP (Second Audio Program) SETTING THE TV FOR STEREO AND SAP STEREO MODE TREBLE BASS BALANCE AVL INCR. SURROUND PICTURE SOUND FEATURES INSTALL Y ou can enjoy stereo programs on your TV. It has both an amplifier and twin speakers through which stereo sound can be heard. Follow these steps to select the STEREO mode. SOUND TREBLE BASS BALANCE AVL INCR. SURROUND BEGIN 30 SOUND BASS BALANCE AVL INCR.
Sound Menu • The Audio Out Control SETTING THE AUDIO OUT CONTROL I f you have connected the TV’s AUDIO OUTPUT jacks to the AUDIO INPUT jacks on a stereo receiver, set AUDIO OUT to either VARIABLE or FIXED to determine whether you adjust the volume at the at the TV or at the stereo. If you select VARIABLE, change the volume at the TV using the TV’s remote control. If you select FIXED, adjust the volume at the stereo using the stereo’s controls. Follow these steps to make your selection.
Sound Menu • The TV Speaker Control and Audio Outputs USING THE TV SPEAKER CONTROL AND AUDIO OUTPUTS W ould you like to hear TV programs through your audio hifi system? The TV’s Audio Outputs and TV Speaker ON/OFF control work together to offer you this TV sound option. TREBLE BASS BALANCE AVL INCR. SURROUND PICTURE SOUND FEATURES INSTALL BEGIN Use audio cables to connect the R(ight) and L(eft) AUDIO OUT(puts) on the TV to the AUX/TV INPUTs on your amplifier or sound system.
Sound Menu • The Bass Boost Control USING THE BASS BOOST CONTROL T he BASS BOOST control allows you to increase the low-frequency range of the TV’s sound. This creates a deeper, fuller sound. Follow these steps to turn BASS BOOST ON. BEGIN Press MENU button on the remote control to show the on-screen menu. TREBLE BASS BALANCE AVL INCR. SURROUND PICTURE SOUND FEATURES INSTALL Press the CURSOR DOWN button once to highlight SOUND. SOUND TREBLE BASS BALANCE AVL INCR.
Remote Control • SmartPicture USING SMARTPICTURE W hether you’re watching a movie or playing a video game, your TV has automatic video control settings that will match with your current program source or content. SmartPicture quickly resets your TV’s video controls for a number of different types of programs and viewing conditions that you may have in your home.
Remote Control • SmartSound USING SMARTSOUND S martSound allows you to select from three factory-set controls and a personal control that you set according to your own preferences through the on-screen Sound menu. The three factory-set controls (Voice, Music, and Theatre) enable you to tailor the TV sound so as to enhance the particular program you are watching. Follow these steps to select any of the options.
Remote Control • Surf and Alternate Channel USING SURF AND ALTERNATE CHANNEL SURF SURF 12 A list of previously viewed channels can be selected with the SURF button on your remote control. With SURF, you can easily switch between different TV channels that currently interest you. The SURF control allows you to set up to ten channels in its quick viewing list.
Remote Control • The Sleep Timer Control USING THE SLEEP TIMER CONTROL H ave you ever fallen asleep in front of the TV, only to be awakened in the middle of the night by the screeching sound that accompanies the on-screen test pattern of a station that’s signed off? Your TV can enable you to avoid that discomfort by automatically turning itself off. You choose the amount of time before the set turns off. SLEEP OFF SLEEP 15 BEGIN Press the SLEEP button on the remote control.
Remote Control • The Volume and AV Buttons USING THE VOLUME AND AV BUTTONS VOLUME BUTTONS P ress the VOLUME (+, –) buttons on the remote and the volume adjustment bar will appear on screen. Adjustments are shown as you make them. VOLUME 15 BEGIN Press the VOLUME (+,–) buttons on the remote control to show the VOLUME bar display on the screen. AV 2 Press the VOLUME (+,–) buttons to adjust the TV’s sound level.
Remote Control • Working Accessory Devices SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES Y our TV remote is capable of working not only your TV but also infrared remote (IR) controlled devices such as VCRs, cable TV converter boxes, satellite receivers, DVD players, and laser disc players. If you want to use your TV remote to operate a VCR or other accessory device, you will need to perform this initial check explained in this section.
Remote Control • Working Accessory Devices SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES DIRECT ACCESS METHOD N ow that you have looked up the three-digit Remote Control Direct Entry Code for your brand of accesSatellite sory device, you are ready to follow Receiver the simple steps shown below. Please read through all the steps before beginning. BEGIN Move the slide switch on the side of the TV remote to VCR or ACC mode for the device you want.
Remote Control • Working Accessory Devices SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES SEARCH METHOD our TV remote can be set to work various accessory devices (VCRs, cable converters, satellite receivers) by what is called the Search Method. NOTE: The Search Method works with devices equipped with Channel Display Indicators (cable TV converters, satellite receivers, etc.). For VCRs, the play/stop function is used to confirm that the correct code has been found.
Remote Control • Working Accessory Devices SETTING THE TV REMOTE TO WORK ACCESSORIES Remote Control Direct Entry Codes VCR BRAND AND REMOTE CODE(S) Admiral . . . . . . . . . . . . . . . . . . . . . . . . .075, 236 Adventura . . . . . . . . . . . . . . . . . . . . . . . . . . .027 Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305 Aiwa . . . . . . . . . . . . . . . . . . .334, 495, 027, 064 Akai . . . . . . . .133, 080, 068, 076, 088, 183, 269 America Action . . . . . . . . . . . . . . .
Remote Control • Working Accessory Devices SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES Remote Control Direct Entry Codes CABLE CONVERTER BRAND AND REMOTE CODE(S) Jerrold . . . . . . . . . . . . . . . . .030, 039, 303, 041, . . . . . . . . . . . . . . . . . . .503, 038, 051, 042, 837 Linsay . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467 Macom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .060 Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . .054 Memorex . . . . . . . .
Picture-in-Picture (PIP) • Basic Connections USING PIP (BASIC CONNECTIONS) P icture-In-Picture (PIP) is the showing of two pictures on the TV screen at the same time—one main screen picture and one small picture, or PIP. PIP Window 2 Back of TV MONITOR OUT ANTENNA IN 75Ω AV1 IN AV2 IN Y VIDEO Pb S-VIDEO MONO/L Main Screen AUDIO Pr R NOTE: The PIP picture must be supplied by a VCR (or other accessory device equipped with a VIDEO OUT[PUT] jack).
Picture-in-Picture (PIP) • PIP Remote Control Buttons USING THE PIP REMOTE CONTROL BUTTONS F ollow these steps to practice using the PIP buttons. You can change the size of the PIP window, reposition it, freeze its image, or swap it with the main picture. BEGIN Press the PIP ON/OFF button to show the PIP window. PIP appears in one of the four corners of the screen. Press the PIP ON/OFF button again to reduce the window size.
Picture-in-Picture (PIP) • The Color and Tint Controls ADJUSTING THE PIP COLOR AND TINT CONTROLS T he Picture-in-Picture (PIP) COLOR and TINT controls allow you to make fine-tune adjustments to the PIP picture settings. BEGIN Press the MENU/SELECT button on the remote control to show the on-screen menu. TIMER AUTOLOCK PIP CLOSED CAP PICTURE SOUND FEATURES INSTALL Press the CURSOR DOWN button twice to highlight FEATURES.
Picture-in-Picture (PIP) • More Connections MORE PIP CONNECTIONS his page shows how to hook PIP up with a cable box and a VCR. T BEGIN First, use an optional signal splitter and connect the original cable TV signal to both the CABLE IN on the cable converter and the ANTENNA plug on the rear of the television. Connect the CABLE OUT on the Converter to the ANTENNA IN on the VCR.
General Information • Helpful Hints HELPFUL HINTS If you are having difficulties with your product, check this list of difficulties and possible solutions before requesting service. You may be able to solve the problem yourself. Charges for TV installation and adjustment of customer controls are not covered under your warranty. If you need to call a customer service representative, please know the model number and serial number of your product before you call.
General Information • Glossary GLOSSARY OF TELEVISION TERMS Audio/Video Inputs ¥ Connectors (RCA phono-type plug), located on the back of the TV, used for the input of audio and video signals. These inputs are designed for use with VCRs (or other accessories) to receive higher picture resolution and offer sound-connection options. Picture-in-Picture ¥ The showing of two pictures on the TV screen at the same time (one main screen picture and one small picture, or PIP).
General Information • Index INDEX alternate channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 ImageMax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 antenna hookup . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-1, 47, 50 language control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-3 audio out control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 name control . . . . . . . . . . . . . .
Philips Factory Service Locations FACTORY SERVICE LOCATIONS Detroit/Toledo • Cleveland/ • • N Ohio • • Chicago ★ Columbus • San Francisco/Metro Area ★ Los Angeles ★ Charlotte • Knoxville/E Tennessee • ★ Pittsburgh/WV Area • Atlanta/N Georgia • Dallas • Philadelphia/S New Jersey ★ Wash/Balt ★ Orlando • Houston • Tampa/W Florida ★ Indicates In-Home Service Only ★ Ft.
Philips Factory Service Locations FACTORY SERVICE LOCATIONS QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
LIMITED WARRANTY PROJECTION TELEVISION One Year Free Labor One Year Free Service on Parts Two Years Free Service on Cathode Ray Tube Parts / 30 days Free Service on Projection TV Screen This product can be repaired in-home. WHO IS COVERED? MAKE SURE YOU KEEP... You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Please keep your sales receipt or other document showing proof of purchase.
