Register your product and get support at OLED865 series www.philips.
Contents 1 What's new 9.6 Storage 4 10 Internet 1.1 Home and channels 4 1.2 Apps and Philips TV Collection 2 Setting Up 4 11 Quick Menu 2.1 Read Safety 5 2.2 TV Stand and Wall Mounting 2.3 Tips on Placement 5 2.4 Power Cable 5 2.5 Antenna Cable 6 2.6 Satellite Dish 6 5 12 Sources 7 4 Switching On and Off 13 Networks 8 13.1 Network 13.2 Bluetooth 14 Settings 11 12 5.1 Install Channels 12 5.2 Channel Lists 12 5.3 Channel List sorting 12 5.4 Watching channels 12 5.5 Favourite Channels 15 5.
22 Freeview Play 75 75 75 22.1 About Freeview Play 22.2 Using Freeview Play 23 Netflix 24 Alexa 76 77 77 77 24.1 About Alexa 24.2 Using Alexa 25 Sunrise Alarm 26 Software 78 79 26.1 Update Software 79 26.2 Software Version 79 26.3 Automatic Software Update 26.4 View Software Update History 26.5 Open Source Software 80 26.6 Open Source License 80 26.7 Announcements 80 27 Specifications 79 80 81 27.1 Environmental 81 27.2 Power 81 27.3 Operating System 81 27.4 Reception 81 27.
All your premium apps are available within the Philips TV Collection app. Launch it using the banner on the Apps row. The Philips TV Collection app will also contain recommendations for new Apps and more. 1 What's new 1.1 Home and channels The new Home launcher Press HOME on your remote control to get your new Android Home screen. From here you can decide what to watch by browsing entertainment options from app and live TV.
according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting Up 2.1 Read Safety 2.3 Read the safety instructions first before you use the TV. Tips on Placement To read the instructions, in Help, press the colour key Keywords and look up Safety Instructions. • Position the TV where light does not shine directly on the screen.
key Keywords and look up Switching On for more information on switching the TV on or off. 2.5 Antenna Cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. 2.6 Satellite Dish Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
3 Top (for UK models) Remote Control 3.1 Key Overview Top 1 - Standby / On To switch the TV on or back to Standby. 2- VOICE microphone 3- To select one of the Ambilight style. 4 - Freeview Play To launch Freeview Play. 1 - Standby / On To switch the TV on or back to Standby. 2- 5- To open the Rakuten TV App directly. VOICE microphone 3- To select one of the Ambilight style. 6 - Quick Menu To open the Quick Menu with typical TV functions.
Middle 1 - TV Guide To open or close the TV Guide. 2 - Volume Prese + or - to adjust the volume level. 3 - Number keys To select a channel directly. 1 - OK key To confirm a selection or setting. To open the channel list while watching TV. 4 - TEXT To open or close Text/Teletext. 2 - BACK To switch back to the previous channel you selected. To return to previous menu. To go back to the previous App/Internet page.
(within 1m distance) during pairing in order to ensure success. 3 - If the TV does not launch the voice control field when press , pairing was unsuccessful. 4 - It is advisable to wait until the set has fully started up and launched all background processes before pairing mode is entered as the toast message containing further instructions may appear too late, thereby negatively impacting the pairing procedure. 3.
household cleaners on the remote control.
4 4.2 Switching On and Off Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… 4.1 1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. Select Demo, to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel.
2 - Select Select Channel List and press OK. 3 - In the list menu, select one of the available channel lists and press OK. 5 Channels Alternatively, you can select the list name at the top of the channel list and press OK to open the list menu. 5.1 Install Channels For more information, in Help, press the colour key Keywords and look up Channel, Antenna Installation or Channel, Installation. Search for a Channel 5.2 You can search for a channel to find it in a long list of channels.
For more information, in Help, press the colour key Keywords and look up Child Lock for more information. 5.4 Watching channels Tune to a Channel Parental Rating To start watching TV channels, press . The TV tunes to the channel you last watched. To prevent children from watching a programme not suitable for their age, you can set an age rating. Switch Channels Digital channels can have their programmes age rated.
You can switch subtitles On or you can select Automatic. Off. Alternatively 1 - Press OPTIONS. 2 - Select Subtitle Language and select one of the languages as subtitles temporarily. Automatic If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages must also be part of the broadcast.
HbbTV on this Channel Picture-in-Picture If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only. You can watch a TV channel in the small screen when you're watching video from a connected HDMI device. Switch on HbbTV To watch a TV channel while watching video from connected HDMI device*… Select Settings > General settings > Advanced > HbbTV settings > HbbTV > On. 1 - Tune to a TV channel.
Create a Favourites List Rename a Favourites List To create a favourite channels list… You can only rename a Favourites List. 1 - Press , to switch to TV. 2 - Press OK to open the current channel list. 3 - Press OPTIONS. 4 - Select Create Favourites List and press OK. 5 - In the list at the left, select a channel you want as a favourite and press OK. Channels come in the list at the right in the order you add them. To undo, select the channel in the list at the left and press OK again.
your favourite list to enable its operation (refer to "TV Guide" chapter). 4 - To close Text, press BACK again. On each page of TV Guide, there is a "Did you know" grid inserted on your favourite channel list. The "Did you know"-channel provides useful tips to improve the way you use your TV. Some digital broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels. This includes normal Text using the number, colour and arrow keys to select and navigate.
setting. To switch off Text 2.5… pages. You can use the (Play), (Pause) and keys to watch videos within iTV pages. 1 - Press TEXT. 2 - With Text/Teletext open on screen, press OPTIONS. 3 - Select Text 2.5 > Off and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. (Stop) Digital Text (UK only) To open Digital Text, press TEXT. To close, press BACK . Close iTV pages Most iTV pages inform you which key to use to close.
the package you need. Some packages offer a Quick or Full install for their available channels, select one or the other. The TV will install the satellite channels and radio stations. 9 - To store the satellite setup and installed channels and radio stations, select Finish. 6 Channel Installation 6.1 Satellite Installation About Installing Satellites Satellite Installation Settings Up to 4 Satellites The satellite installation settings are preset according your country.
Channel Packages User Band Frequency Satellite operators can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country. Some satellites offer subscription packages - a collection of channels you pay for. Next to the unique user band number, the built-in satellite receiver needs the frequency of the selected user band number. These frequencies are mostly shown next to the user band number on a Unicable switchbox.
channels and radio stations. Homing Transponder and LNB You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite. In some countries, you can adjust the expert settings for homing transponder and each LNB. Only use or change these settings when a normal installation fails. If you have non-standard satellite equipment, you can use these settings to overrule the standard settings.
the channel package. Manual Channel Update I cannot remove a satellite You can always start an channel update yourself. • Subscription packages do not allow removing a satellite. To remove the satellite, you have to do a complete installation again and select another package. To start a channel update manually… 1 - Select Settings > Channels > Antenna/Cable Installation or Antenna Installation and press OK. 2 - Enter your PIN code if necessary. 3 - Select Search for Channels and press OK.
2 - Enter your PIN code if necessary. 3 - Select Yes and press OK to confirm. 4 - The TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minutes. 5 - Press (left) to go back one step or press BACK to close the menu. Frequency Scan Select the method of searching for channels. You can select the faster Quick Scan method and use the predefined settings used by most cable operator in your country.
3 - Select Digital: Reception Test and press OK. 4 - Select Search and press OK. The digital frequency is shown for this channel. 5 - Select Search again and press OK to check the signal quality of this frequency. The test result is shown on screen. You can reposition the antenna or check the connections to possibly improve the reception. 6 - You can also change the frequency yourself. Select the frequency number one by one and use the (up) or (down) keys to change the value.
Channel List Version Check the current version of the channel list... 1 - Select Settings > Channels and press (right) to enter the menu. 2 - Select Channel List Copy and select Current Version, then press OK. 3 - Press (left) repeatedly if necessary, to close the menu. Upload a Channel List To not Installed TVs Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
7 HDMI ARC Connect Devices All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). 7.1 If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
• EasyLink might not work with devices from other brands. • The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. Example HDMI CEC branding names are property of their respective owners. 7.2 CAM with Smart Card - CI+ When you switch on the TV, it may take a few minutes before the CAM is activated.
connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection. 7.5 Blu-ray Disc Player Use a High speed HDMI cable to connect the Bluray Disc player to the TV. Audio to video synchronisation (sync) If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.
7.8 Remove a Device Game Console You can connect or disconnect a wireless Bluetooth device. You can also remove a wireless Bluetooth device. If you remove a Bluetooth device, the device will be unpaired. HDMI For best quality, connect the game console with a High speed HDMI cable to the TV. To remove or disconnect a wireless device… 1 - Select Settings > Wireless and Networks and press OK. 2 - Select Bluetooth > Remove Bluetooth device and press OK.
press (Pause). Trying to pause will start the formatting. 3 - Select Recordings if you want to perform Pause TV and Recordings, otherwise, select Apps to store apps. Follow the instructions on screen. 4 - All files and data will be removed after formatting. 5 - When the USB Hard Drive is formatted, leave it connected permanently. Follow the instructions on screen. When the USB Hard Drive is formatted, leave it connected permanently.
• - = zoom out one step • * = fit the web page to the screen width 7.11 If the contents list does not appear automatically, press SOURCES , and select USB. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. USB Flash Drive Ultra HD on USB You can view photos in Ultra HD resolution from a connected USB device or flash drive.
7.14 Computer You can connect your computer to the TV and use the TV as a PC monitor. Use an HDMI cable to connect the computer to the TV.
select OK to make the connection immediately. 3 - A message will be shown when the connection is successful. 8 Connect your Android TV Problems 8.1 To enjoy the full capabilities of your Philips Android TV, your TV must be connected to the Internet. Wireless network not found or distorted • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection.
Settings > Wireless and Networks > Wired or WiFi > Switch on with Chromecst. Make the Connection Settings > Wireless and Networks > Wired or WiFi > Connect to Network > Wired. Set it On to allow this TV to be switched on from a Chromecast app on your mobile device. Power consumption of the TV in standby status will be higher when switched this on. The Wi-Fi (WoWLAN) setting should be turned on firstly before you can change the setting of Switch on with Chromecast.
your TV home screen as well as access to YouTube, Google Play and other apps. channels or find new apps to get more contents. The Home screen is organised in channels… Sign In Apps Use your existing Google Account to sign in to Google on your TV. A Google Account consists of an email address and a password. If you don't have an Google Account yet, use your computer or tablet to create one (accounts.google.com). To play games with Google Play, you need a Google+ profile.
screen to resume. read. 3 - Select Accept and press OK. You cannot undo this approval. 4 - Press BACK to close the menu. 8.4 Philips TV Collection App Privacy Settings Featured Apps page You can set some privacy settings for the Philips TV Collection apps. All your premium apps are available within the Philips TV Collection app, under Featured apps section. Launch it using the banner on the Apps row. • You can allow technical statistics to be send to Philips.
via the Apps page or by the Add app to favourites item on the Apps row. Some Google Play products and features aren't available in all countries. 9 Apps Find more information on www.support.google.com/androidtv 9.1 About Apps You can find your favourite Apps on Home menu. Apps row in the Music Like apps on your smartphone or tablet, the apps on your TV offer specific functions for an enriched TV experience. Apps like YouTube, games, video stores or weather forecasts (a.o.).
1 - Press HOME. 2 - Select Google Play Games. 3 - Select a game to play or select a new game to install and press OK. 4 - When done, press BACK repeatedly or press EXIT or stop the app with its dedicated exit/stop button. Payments To make a payment on Google Play on TV, you must add a form of payment - a credit card (outside the United States) - to your Google Account. When you purchase a movie or TV show, you will be charged on this credit card.
according to users/buyers maturity. You need to enter a PIN code to select or change the level of maturity. The level of maturity will determine which apps are available for instalation. 2 - Press (down) and select Device Preferences > Security & restrictions and press OK. 3 - Select Restricted Profile and press OK. 4 - Select Settings and press OK. 5 - Enter a PIN code with the remote control. 6 - Select Allowed apps and press OK.
9.6 Storage You can see how much storage space - the internal TV memory - you are using for your apps, videos, music, etc. You can see how much free space you still have available for installing new apps. Check your storage if apps start to run slow or in case of app trouble. To see how much storage you are using… 1 - Select Settings > Android Settings and press OK. 2 - Select Device Preferences > Storage and press OK. 3 - View the storage usage of the TV memory.
10 Internet 10.1 Start Internet You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen. • Some plug-ins (e.g. to view pages or videos) are not available on your TV. • You cannot send or download files. • Internet pages are shown one page at a time and full screen. To start the Internet browser… 1234- Press HOME. Select Apps > Internet Browser and press OK. Enter an Internet address and select to confirm.
11 Quick Menu You can use the Quick Menu as your Home menu. In the Quick Menu, you will find a quick way to access TV functions. To open Quick Menu and open an item… 1 - Press to open Quick Menu. 2 - Select an item and press OK to open or start it. 3 - Press BACK to close Quick Menu without starting anything.
12 connected device. Sources 12.3 12.1 Device Name and Type Switch to a device When you connect a new device to the TV and the TV detects the device, you can assign an icon that fits the device type. If you connect a device with an HDMI cable and HDMI CEC, the TV detects the device type automatically and the device gets an appropriate icon. From the list of Sources, you can switch to any of the connected devices.
Newly connected devices will be added to the Sources menu.
13 Networks 13.1 Network For more information, in Help, press the colour key Keywords and look up Network, for more information on connecting the TV to a network. 13.2 Bluetooth Pairing a Device For more information, in Help, press the colour key Keywords and look up Bluetooth, Pairing for more information on pairing wireless devices.
• HDR Vivid • Dolby Vision Bright • Dolby Vision Dark • HDR Game 14 Settings Restore a Style 1 - Select the picture style you want to restore. 2 - Press the colour key Restore style, and press OK. The style is restored. 14.1 Picture Picture Settings Picture Style Customise a Style Select a style Any picture setting you adjust, like Colour or Contrast, is stored in the currently selected Picture Style. It allows you to customise each style.
mode. Advanced Picture Settings Select Red, Green or Blue to switch picture as selected colour only, or select Off to turn off RGB mode. Colour Settings Advanced Colour Settings Settings > Picture > Advanced > Colour. Advanced Contrast Settings Contrast Modes Adjust the colour enhancement Settings > Picture > Advanced > Contrast > Contrast mode. Settings > All settings > Picture > Advanced > Colour > Colour enhancement.
screen picture. Perfect Contrast Settings > Picture > Advanced > Contrast > Perfect contrast. MPEG Artefact Reduction Settings > Picture > Advanced > Picture clean > MPEG Artefact Reduction. Select Maximum, Medium, or Minimum to set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. Select Maximum, Medium, or Minimum to have different degress of smoothing the artefects in digital video content.
different degress for reducing the motion judder, visible in movies on TV. Select Minimum or Off when noise appears in playing moving picture on-screen. Picture Format If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely. Note: Only available when Motion styles set to Personal.
Select On to get an improved sound quality for speech programme. 14.2 Sound Sound Style AI Equalizer Select a style Settings > Sound > Personal mode settings > AI Equalizer. Settings > Sound > Sound style. Select On to enable intelligent equalizer adjustment based on audio content and custom settings. For easy sound adjustment, you can select a preset setting with sound style. • AI mode - Automatic surround optimisation by Dolby. • Original - General-purpose mode for everyday listening.
balance the sound level difference between the TV channel and the HDMI source input. Press the arrows (up) or (down) to adjust the delta value for TV speaker volume. Settings > Sound > Advanced > Digital out levelling. Adjust the loudness level from device which is connected to digital audio output (SPDIF) or HDMI. * Note: Delta volume is available when the input source is set to HDMI or Analogue sources and the Audio out is set to TV speakers or HDMI sound system.
This function is available when you control Ambilight with an app. Ambilight Style You can select the way Ambilight follows. Settings > Ambilight > Ambilight style. Ambisleep Ambisleep simulates sunset to help you unwind before you fall asleep. At the end of simulation, TV will automatically switch to standby. Follow video Settings > Ambilight > Ambilight style > Follow video. Settings > Ambilight > Ambisleep. Select one of the styles that follow the dynamics of the picture on your TV screen.
Neutralise the influence of a coloured wall on the Switch Off Ambilight colours Switch on/off Ambilight+hue Settings > Ambilight > Advanced > Wall colour. Settings > Ambilight > Ambilight+hue > Switch on/off. Select the colour of the wall behind the TV and the TV will modify the Ambilight colours to appear as they are intended. Immersion Set Ambilight to switch off immediately or slowly Settings > Ambilight > Ambilight+hue > Immersion.
Press the arrows (up) or (down) to adjust the value. The value 0 (Off) deactivates the automatic switch off. USB Keyboard Settings Select Switch off timer, the TV switches off automatically to save energy. * TV switches off if receiving a TV signal but you don't press a key on the remote control during a 4 hour period. Settings > General settings > USB keyboard settings. Set the keyboard layout for installed USB keyboard Connect the USB keyboard to one of the USB connections on this TV.
property of their respective owners. AI Picture demo autostart Settings > General settings > Shop setup > AI Picture demo autostart. HDMI Ultra HD Turn On/Off the AI Picture demo autostart. This TV can display Ultra HD signals. Some devices connected with HDMI - do not recognise a TV with Ultra HD and might not work correctly or show distorted picture or sound. On AI Picture demo mode, you can see how AI Picture mode improves the picture quality. The demo mode includes below parts.
settings > Advanced > OLED screen settings > Pixel shift. Pixel shift will constantly shift pixels position over time to reduce pixel stress. It is recommended to switch on this function. Switching off this function over a long period of time may result in image retention which may void your warranty. Sometimes pixel shift may result in a small portion (<1%) of picture content near screen edge being cropped off.
Set teletex preference language Reset TV Settings and Reinstall TV Settings > Region and language > Language > Primary text, Secondary text. Reset all settings value to original TV settings Settings > General settings > Factory settings. Some digital TV broadcasters have several Text languages available. Redo full TV installation , and set TV status back to the first time you switch on Settings > General settings > Reinstall TV.
Increase the intelligibility of dialogue and commentary, if available. 14.7 Android Settings Settings > Android settings. 14.9 View the list of installed Apps, check out the free space to download more or uninstall an App. Lock Settings Set Code and Change Code 14.8 Universal Access Settings Set a new code or reset the change code Settings > Universal access. The child lock code is used to lock or unlock channels or programmes. Settings > Child lock > Set code / Change code.
Lock for CAM Set CAM PIN for recording Settings > Child lock > CAM PIN.
15 15.3 Videos, Photos and Music Most Popular Menu and Last Played Menu View most popular files or clear the list 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and select Most popular. 3 - Select one of the file and press OK to view files or press Clear all to clear the list. 15.1 From a Computer or NAS You can view your photos or play your music and videos from a computer or a NAS (Network Attached Storage) in your home network.
15.5 Video Options Play your Videos Browse video files... Play Videos • List/Thumbnails – List or thumbnails views • Shuffle – Play your files in a random order • Repeat – Plays all videos in this folder once or continuously Open video folder 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and press (right) to select the USB device you need. 3 - Select Videos, you can press Mark favourite to add the video folder to favourite menu - Favourites.
View a 360 photo 1 - Press SOURCES, select USB and press OK. 2 - Select USB Devices and press (right) to select the USB device you need. 3 - Select 360 Photos and select one of photos, you can press Play All to play all files in the folder or press Mark favourite to add the selected photo to favourite menu - Favourites.
- 360 Photo Options Browse 360 photo files...
press OK. 2 - Press BACK to close. 16 TV Guide Change Day 16.1 What You Need The TV Guide can show the scheduled programmes for the upcoming days (maximum up to 8 days). With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV Guide information. Press the colour key Day and select the day you need.
List of Reminders You can view a list of the reminders you have set. List of Reminders To open the list of reminders… 1 - Press TV GUIDE. 2 - Press the colour key Scheduled . 3 - At the top of the screen, select Scheduled and press OK. 4 - In the list of scheduled recordings and reminders, select the tab Reminders and press OK to view the reminders only. 5 - Press the colour key Remove to remove the selected reminder. Press the colour key Record to record the selected programme.
17 Schedule a Recording Recording and Pause TV You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme… 17.1 1 - Press TV GUIDE. 2 - On the TV Guide, select the channel and programme you wish to record. Press (right) or (left) to scroll through the programmes of a channel. Use the colour key Day to select the day you need.
or both scheduled recordings. recordings and reminders. To adjust the start or end time of a scheduled recording… Watch a Recording 1 - Press TV GUIDE. 2 - Press the colour key Recordings . 3 - At the top of the screen, select Scheduled and press OK. 4 - In the list of scheduled recordings and reminders, select the tab Recordings and press OK to view the scheduled recordings only.
Replay Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. To replay a current broadcast… 1 - Press (Pause) 2 - Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed. At one point you will reach the start of the broadcast storage or the maximum time span. 3 - Press (Play) to watch the broadcast again.
18 Cast to Your TV Smartphones and Tablets To cast an app to the TV screen… 1 - On your smartphone or tablet, open an app that supports Google Cast. 2 - Tab the Google Cast icon. 3 - Select the TV you would like to cast to. 4 - Press play on your smartphone or tablet. What you selected should start playing on TV. 18.1 Philips TV Remote App The new Philips TV Remote App on your smartphone or tablet is your new TV buddy. With the TV Remote App, you master your media around you.
19 Games 19.1 What You Need On this TV, you can play games… • from the Philips TV Collection in the Home menu • from the Google Play Store in the Home menu • from a connected Game Console Games from the Philips TV Collection or the Google Play Store must be downloaded and installed on TV before you can play them. Some games need a gamepad to play. To install game apps from the Philips TV Collection or the Google Play Store, the TV must be connected to the Internet.
20 Lounge Light Ambilight You can set Ambilight to follow the video or the audio dynamics of a TV programme. Alternatively, you can set Ambilight to show a preset colour style or you can switch Ambilight off. 20.1 Ambilight Style If you select Lounge light, you can select one of the preset colour styles. Follow Video To set the Ambilight Style… You can set Ambilight to follow the video or the audio dynamics of a TV programme.
20.4 Lounge Light Mode The lounge light mode of your TV allows you to switch on the Ambilight when the TV is in standby. So you can light up your room with Ambilight. After you have switched your TV to standby and wish to switch on the Ambilight lounge light, follow these steps: 1 - Press . 2 - After you have pressed the , the Ambilight lounge light will be switched on. 3 - Press again if you wish to change to a different light effect.
• the TV must have channels installed. • the TV must be connected to the Internet. • the TV Clock must be set to Automatic or Country Dependent. • you must accept the Terms of Use (You might have accepted already when you connected to the Internet.). 21 Top Picks 21.1 About Top Picks The icon will only appear at the top of the screen when Now on TV is available.
Using TV on Demand You can select a specific video store if more than one is available. To open TV on Demand… To rent a movie… 1 - Press to open Quick Menu. 2 - Select Top Picks to open the Top Picks menu. 3 - Select TV on Demand at the top of the screen and press OK. 4 - Press (down) to open the page full screen. 5 - You can select a specific broadcaster if more than one is available. 6 - Select a programme icon and press OK to start watching. 7 - Press BACK to close.
22 Freeview Play 22.1 About Freeview Play To enjoy Freeview Play*, you need to connect your TV to Internet first. Freeview Play offers: • Watch TV programmes you missed from the last seven days. • Watch live TV and on demand, all in one place without entering an app, you can search Freeview Play programmes in TV Guide. • Watch over 70 standard channels and upto 15 HD channels. • Enjoy on demand services like BBC iPlayer, the ITV Hub, All 4, Demand 5, BBC NEWS and BBC SPORT.
23 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. In your region, Netflix might only come available with future software updates. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
3 - Follow the instructions on screen to accept Privacy Policy terms, name your TV and sign in your Google account. The Google account is needed to pair with Alexa device. 4 - On your mobile device, sign in with the same Google account in the Amazon Alexa companion app. 5 - Complete following steps in the Amazon Alexa companion app. The first is to enable "Philips Smart TV Voice Control" skill. The second is to link your Google account and then the final is to discover devices.
25 Sunrise Alarm Sunrise alarm uses Ambilight, music and weather information for a new wake up experience. • TV wakes up at selected time and day set by you. • Lights up Ambilight with fade-in colored screen and music. • Slowly transit to weather forecast with matching backdrop. To enter the Sunrise alarm setting menu… 1 - Press to open Quick Menu. 2 - Select Sunrise alarm and press OK to open it. - Alarm: set multiple alarms up to 5, for repeat/select days, On/Off settings.
1 - Insert the USB flash drive into your computer. 2 - On the USB flash drive, locate the file update.htm and double click it. 3 - Click Send ID. 4 - If new software is available, download the .zip file. 5 - After the download, unzip the file and copy the file autorun.upg onto the USB flash drive. Do not place this file in a folder. 26 Software 26.1 Update Software Update from Internet Update the TV software 1 - Insert the USB flash drive into the TV again. The update starts automatically.
26.3 26.6 Automatic Software Update Open Source License To switch on Automatic software update to update your TV software automatically. Leave the TV in standby. About Open Source License README for the source code of the parts of TP Vision Netherlands B.V. TV software that fall under open source licenses. 1 - Select Settings > Update Software > Automatic Software Update > On, and press OK. 2 - Follow the on-screen instruction. 3 - Press (left) repeatedly if necessary, to close the menu.
Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health. 27 Specifications 27.1 Environmental 27.2 Power European Energy Label Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport The European Energy Label informs you on the energy efficiency class of this product.
27.6 27.8 Display Input Resolution Sound Supported input resolution - Video Output power (RMS) : 50W Dolby Atmos (DDP/DTHD) • Dolby MS12 V2.3 • Dolby AC-4 • DTS – HD (M6) • Dolby Atmos Virtualizer Resolution — Refresh rate • 480i - 60 Hz • 480p - 60 Hz • 576i - 50 Hz • 576p - 50 Hz • 720p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz, 100 Hz, 120 Hz • 1080i - 50 Hz, 60 Hz • 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz, 100 Hz, 120 Hz • 2160p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz 27.
Ambilight* are working fine. • Check the network - Check the network connection. • Check the remote control - Perform the test to verify the TV bundled remote control functionality. • View weak signal history - Display the list of channel numbers that were automatically saved when signal strength was weak. • Update software - Check available software updates. • User manual - Read the user manual for TV information. • Troubleshooting - Find a solution for frequent ask questions.
The TV goes back to standby after showing the and it takes about 10 minutes with TV in standby mode. • Deep refreshing: This will take about 80 minutes and need to be triggered by consumer. During the process, a white color horizontal line will appear on screen for a while. Philips startup screen When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behaviour.
refer to the instruction manuals for the connected devices. • Avoid displaying video with bright colors (including white), text, clocks or logos on any parts of the screen for a long time. • Use Wide screen or Fill screen as picture format option (see TV picture settings). • Always watch video in full screen instead of a small window on TV screen. (e.g. video in internet browser page) • Do not attach any sticker or label on the OLED panel to reduce the chance of image residual phenomenon.
device's documentation. • Make sure that the USB storage device is compatible with the TV. • Make sure that the audio and picture file formats are supported by the TV. Sound No sound or poor sound quality If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Choppy playback of USB files • The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback.
28.4 Online Help To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/TVsupport On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 29 Safety and Care 29.1 Stability Hazards Safety A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Important Read and understand all safety instructions before you use the TV.
times. • Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time. Stationary images include onscreen menus, black bars, time displays, etc. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Risk of Overheating Never install the TV in a confined space. Always leave a space of at least 10 cm or 4 inches around the TV for ventilation.
black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. 30 Terms of Use 30.1 CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design) and 2011/65/EC (RoHS). Terms of Use - TV 2020 © TP Vision Europe B.V.
31 Copyrights 31.1 HDMI HDMI 31.4 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DTS-HD (italics) DTS For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc.
31.6 Wi-Fi Alliance Wi-Fi Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 31.7 Kensington Kensington (If applicable) Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. 31.8 Other Trademarks All other registered and unregistered trademarks are the property of their respective owners.
32 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index Digital Text 17 Disposal of TV or batteries 81 Dolby Atmos 50 Dolby Atmos notification 51 Dolby Vision notification 49 DVB (Digital Video Broadcast) 23 A Advanced AI settings 49 Age Rating 13 Alexa 77 Ambilight Style 71 Ambilight+hue, configuration 52 Ambilight+hue, Immersion 53 Ambilight+hue, on or off 53 Ambilight, Settings 51 Ambisleep 52 Android Settings 35 Announcements 80 Antenna, Manual Installation 24 APP lock 38 Apps 37 Audio Language 14 Audio Language, Primary 14 Audio Language, Secondary 1
TV Guide 64 TV Guide Data 64 TV Guide, reminders 64 TV Installation 22 TV on Demand 73 TV placement 5 P Parental Rating 13 Pause TV 66 Personal mode, Clear dialogue 50 Personal mode, Equalizer 50 Photos, Videos and Music 60 Picture in picture 15 Picture Style 46 Picture, picture format 49 Power cable 5 Problems, Channels 84 Problems, Connection, Internet 86 Problems, Connection, Wi-Fi 86 Problems, HDMI Connection 86 Problems, Picture 85 Problems, Remote control 83 Problems, Sound 86 Problems, USB Connectio
Powered by TCPDF (www.tcpdf.
