User guide

8
Use of the remote control
POWER
BRIGHTNESS
CONTRAST
ZOOM OUTZOOM INZOOM ON/OFF
VGA AV1 AV2 AV3
MUTE
AV MUTE
q
1
2
3
4
5
6
7
8
9
0
V
CH/PR
MENU
OK
¬
B
VGA
press repeatedly to select your computer
connected to the
VGA or to the DVI
(digital RGB) connector.
AV1, AV2, AV3
press to select the peripherals connected
to one of the
VIDEO connectors (AV1), to
the
COMPONENT INPUT (AV2)
(Y/CbPb/CrPr) or RCrPr/GY/BCbPb/HD/VD
(AV3) connectors.
V No function
¬
MUTE button
No function
CH/PR Program selection
To browse through the sources selected.
B to switch to standby or on again
(Does not operate when
POWER/
STANDBY indicator of the plasma display
is off).
MENU to switch the menu on/off
cursor buttons to select your choice and
to alter a selected adjustment.
OK to activate your choice
AV MUTE to mute the picture or
restore it if the plasma display is used in
the
VGA mode).
When activated a green indicator starts
blinking in front of the plasma display.
q Picture format
Press the q button to switch between
the different picture formats.
BRIGHTNESS +/-
to adjust the brightness level of the picture
CONTRAST +/-
to adjust the contrast level of the picture
ZOOM ON/OFF
to activate/de-activate the zoom function.
ZOOM IN/OUT to adjust the zoom factor
and to change the magnification of the
picture when zoom is activated.
Use of the remote control
Picture format
Press the q button to switch between the different picture formats.
Note:When the setting of
PICTURE SIZE in the OPTION2 menu, p. 12, is OFF, the picture format of RGB-input pictures will be TRUE in
place of
NORMAL
.
Video-mode HD-mode VGA-mode
4:3 signals Wide signals
Zoom Normal Full Normal/True True
Full Stadium Full Full
126 1023.2 en us 29-08-2002 15:05 Pagina 8