User guide

13Use of the menus and the menu system
Set-up menu
Setting the menu language
& Select LANGUAGE.
é Use the cursor left/right to select one of the languages which will be used
to display the menus.
“ Press the OK button to confirm.
Setting the video signal format
This control allows you to set the video signal format used in the country
you are now located.
& Use the cursor down to select COLOR SYSTEM.
é Use the cursor left/right to select one of the different formats for video
signals.
AUTO1/2: the video signals are automatically detected and the format is set
accordingly.
AUTO 1: 3.58 NTSC, 4.43 NTSC, PAL, SECAM, PAL 60
AUTO 2: PAL-M, PAL-N, 3.58 NTSC
(Manual selection is also possible.)
Frequency menu
This control allows you to check the frequencies the polarities and the
resolution of the signals currently being input from a computer.
The menu items cannot be selected nor controlled and are displayed in
English only.
LANGUAGE • ENGLISH •
COLOR SYSTEM •
PRESS OK TO CONFIRM
SET-UP
H. FREQUENCY • 43.3 KHZ
V. FREQUENCY • 85.0 KHZ
H. POLARITY • NEGATIVE
V. POLARITY • NEGATIVE
MODE • 9
RESOLUTION • 640 X 480
FREQUENCY
J
SELECT
L M
ADJUST MENU RETURN
J
SELECT
M
SELECT MENU RETURN
126 1023.2 en us 29-08-2002 15:05 Pagina 13