INTEGRATED CIRCUITS NE/SA/SE5534/5534A Single low noise operational amplifier Product data Supersedes data of 1994 Aug 31 File under Integrated Circuits, IC11 Data Handbook 2001 Aug 03
Philips Semiconductors Product data Single low noise operational amplifier DESCRIPTION NE/SA/SE5534/5534A PIN CONFIGURATIONS The NE/SA/SE5534/5534A are single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability, and considerably higher small-signal and power bandwidths.
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A ABSOLUTE MAXIMUM RATINGS SYMBOL PARAMETER RATING UNIT ±22 V ±V supply V ±0.
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A AC ELECTRICAL CHARACTERISTICS Tamb = 25 °C, VS = ±15 V, unless otherwise specified. SYMBOL ROUT PARAMETER NE/SA5534/5534A Min AV = 30 dB closed-loop f = 10 kHz; RL = 600 Ω; CC = 22 pF Output resistance Transient response tR TEST CONDITIONS Rise time Rise time Overshoot Gain GBW Gain bandwidth product SR Typ Max UNIT 0.3 0.
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A EQUIVALENT SCHEMATIC 1 8 5 7 2 3 6 4 SL00337 Figure 2.
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A TYPICAL PERFORMANCE CHARACTERISTICS Open-Loop Frequency Response Slew Rate as a Function of Compensation Capacitance 120 60 16 TYPICAL VALUES 5 8 S 8 (V/µs) GAIN (dB) CC = 22pF CC = 0; RF = 10kΩ; RE = 100Ω 40 12 CC = 0 40 TYPICAL VALUES VS = +15V CC 80 GAIN (dB) Closed-Loop Frequency Response CC = 0; RF = 9kΩ; RE = 1kΩ 20 CC = 22pF; RF = 1kΩ; RE = ∞ TYP 0 0 4 -40 -20 103 0 10 102 103 1
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Input Noise Current Density Total Input Noise Density 106 102 TYPICAL VALUES 105 10 104 In(rms) (pAń ǸHz) 1 Vn(rms) 103 (nVń ǸHz) 102 TYP 10–2 10 10Hz TO 20kHz Vn(rm 1 s) (µV) 1kHz 200Hz TO 4kHz THERMAL NOISE OF SOURCE RESISTANCE 1 10–1 10 102 10–2 103 104 f (Hz) TYPICAL VALUES 10Hz 10 10–1 Broadband Input Noise Voltage 102 10–1 10–2 0 10
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A NOISE TEST BLOCK DIAGRAM CAL OSC POWER SUPPLY +VCC -VCC (nVń ǸHz) CAL METER BANDPASS AT 1kHz 1Ω + DUT 10kΩ (nVń ǸHz) +40dB BANDPASS AT 30Hz 100Ω TEST BOARD GND SL00341 Figure 6.
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A SO8: plastic small outline package; 8 leads; body width 3.
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A DIP8: plastic dual in-line package; 8 leads (300 mil) 2001 Aug 03 10 SOT97-1
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A NOTES 2001 Aug 03 11
Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A Data sheet status Data sheet status [1] Product status [2] Definitions Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification.
