Technical data

Connections 35
ENGLISH
7.5 Connection setup
The TV needs to know what connections you have
made and which device is connected to which
connector.
If you have used the Connection assistant the
connection setup is already done.
7.5.1 Naming your devices
Name the connected devices for easy selection and
best signal handling.
Assign the type of device (DVD,VCR, Game, ...) to
the connector you use for that device.
‡ Press
MENU on the remote control and select
Setup > Installation> Rename devices.
® Press π to enter the list.
ÒPress o or œ to select the connector you
used for the device you connected.
† Press π.
º Press o or œ to select the type of device.
◊Press
MENU to quit the menu.
7.5.2 Audio setup
If you use the Audio In L/R (DVI to HDMI)
connector for a device connected to HDMI at the
back of the TV, assign this Audio In to the HMDI 1,
2 or 3 where the device is connected.
‡ Press
MENU on the remote control and select
Setup > Installation > Audio setup.
® Press π twice.
ÒPress o or œ to select the HDMI connection
that should be linked up with this Audio In.
Audio setu
p
Audio in L
/R
N
o
n
e
HDMI 1
HDMI 2
HDMI
3
Audio in L
/R
VE08_AP EN.qxd 10-03-2008 14:27 Pagina 35