Register your product and get support at www.philips.
1 Notice 3 3 Your product 5 5 4 Use your product Switch your TV on/off or to standby Switch channels Watch connected devices Adjust TV volume 23 9 Troubleshooting 25 10 Index 27 2 2 Important Product overview 8 Product information 7 7 7 7 8 5 Use more of your product 9 Access TV menus 9 Change picture and sound settings 9 Create and use lists of favorite channels 12 Hide and show a channel 12 Use the Electronic Program Guide 12 Use timers 13 Use child control and rating locks 13 Use the TV c
1 Notice 2009 © Koninklijke Philips Electronics N.V. All rights reserved. Speci cations are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or re! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.
Remote control E n glish 3 Your product Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your product at www.philips.com/welcome. 29 28 27 26 Product overview 25 This section gives you an overview of commonly used controls and functions. 1 2 3 4 5 6 7 8 Side controls 9 24 4 3 23 10 11 12 13 14 15 2 22 16 1 17 a POWER: Switches the product on or off.
b c FAVOURITES Mark a channel as favorite. SOURCE Selects connected devices. t Note used. u A/CH (Alternate channel) Toggles between the current channel and the last viewed channel. d CLOCK Displays the clock. v +/- ( Volume +/-) Increases or decreases volume. e CC Displays closed captions settings. w (Mute) Mutes or restores audio output. f (Home) Toggles the home menu on or off. x g OPTIONS Accesses options relating to the current activity or selection.
Switch channels E n glish 4 Use your product This section helps you perform basic operations (see ‘Use more of your product’ on page 9). Switch your TV on/off or to standby • • • • Press BACK A/CH on the remote control to return to the previously viewed channel. Press CH +/- on the remote control or P/CH +/- on the side of the TV. Press OK to use the channel matrix. Enter a channel number using the Numeric buttons. Note To switch on • If the standby indicator is off, press POWER at the side of the TV.
Use the home menu Note • You can add new devices to the home menu for easy access . 1 Press (Home). » The home menu appears. 2 3 Press to select the device. Press OK to watch the connected device on your TV. Adjust TV volume To increase or decrease volume +/-. • Press • Press VOLUME +/- on the side of the TV. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound.
• 3 4 Access TV menus [Installation] Accesses the channel installation, clock, and child lock menus. [Browse USB] Accesses ash drives. Press OK to con rm your choice. Press (Home)to exit. Tip Menus help you to install channels, change picture and sound settings and access other features. • After selecting [Add your devices], follow the on-screen instructions to select the correct device and connector.
• • • • • 4 [Vivid] Maximizes picture and sound settings. [Standard] Adjusts picture and sound settings to suit most environments and types of video. [Movie] Applies picture and sound settings ideally suited for movie viewing. [Game] Applies picture and sound settings maximized for fast-moving games. [Energy saving] Applies low-energy picture and sound settings. • • • • • Press OK to con rm your choice.
Adjust sound settings 1 2 3 1 Press FORMAT. » A picture format bar appears. 2 Press to select a picture format. » The selected picture format is activated. 3 Press OK to con rm your choice. Summary of picture formats The following picture settings can be con gured. Note • Depending on the format of the picture source, some picture settings are not available. [Auto format] (Not for PC mode.) Enlarges the picture automatically to best t the screen. The subtitles remain visible.
Create and use lists of favorite channels You can create lists of your preferred TV channels so that you can nd those channels easily. Note • Digital radio stations can also be added to favorite lists, if supported. Press FAVOURITES VIEW to view the favorites list. Hide and show a channel 1 When watching TV, press OK to display the channel grid. 2 Press to choose the channel that you wish to hide. 3 4 5 Press Press OPTIONS . to select [Hide channel]. Press OK . » The channel is now hidden.
Use EPG 1 When watching TV, press GUIDE . » The EPG planner screen appears. 2 Press (Home). » The program guide menu appears. 3 Press to select an option, and then press OK to con rm it. 4 Press (Home) to exit the EPG menu. Note You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings. Set or change your PIN code 1 2 3 • Only the channels marked with [x] in the [Pref. EPG channel] list, appear in the EPG menu.
Use the TV clock You can display a clock on the TV screen. The clock displays the current time using time data received from your TV service operator. When watching TV, press CLOCK . » The clock is displayed. Change the clock mode 1 2 3 Press View photos, play music and watch video from a USB storage device Your TV is tted with a USB connector that enables you to view photos, listen to music or watch movies stored on a USB storage device. Supported le formats Pictures (Home).
Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. • • Download the software 1 On your PC, open a web browser and go to www.philips.com/support. 2 Find information and software related to your TV and download the latest software upgrade le to your PC. 3 4 Decompress the ZIP- le. Copy the autorun.upg le to the root directory of the USB device.
Display closed captions Closed captioning displays the audio portion of a television program as text on the television screen. Note • Check with your TV network for closed captioning availability. 1 2 When watching TV, press CC. Press OPTIONS to display the type of closed captioning channels. 2 3 Select a type from the list. 16 EN Press OK .
E n glish 6 Install channels The rst time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and ne tune channels. Automatically install channels This section describes how to search and store channels automatically. 1 2 3 4 Press (Home). Select [Installation] > [Channel installation] > [Automatic installation]. Select [Start] and press OK .
7 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. Note • Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. b AUDIO IN L/R Audio input from devices that require a separate audio connection, such as a computer. c VGA Video input from a computer. d SPDIF OUT Digital audio output to home theaters and other digital audio systems.
1 2 3 4 Connect a computer E n glish Side connectors Before you connect a computer to the TV • Set the monitor refresh rate on your computer to 60Hz. Connect a computer with one of the following connectors: Note • Connections via DVI or VGA require an additional audio cable. • HDMI cable 5 6 7 a AUDIO IN L/R Audio input from analog devices connected to VIDEO or S-VIDEO. b VIDEO Composite video input from analog devices such as VCRs.
• DVI-HDMI cable Note • Philips does not guarantee 100% interoperability with all HDMI CEC devices. PC AUDIO IN/ PC IN(AUDIO) Note • The EasyLink-compliant device must be DVI switched on and selected as the source. EasyLink features • HDMI cable and HDMI-DVI adaptor PC AUDIO IN/ PC IN(AUDIO) One-touch play When you connect your product to devices that support one-touch play, you can control your product and the devices with one remote control.
Remote control (RC) key forwarding RC key forwarding allows you to control EasyLink-compliant devices using your TV remote control. Tip • Press TV to switch back to the antenna source from EasyLink mode. Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. EasyLink buttons You can control EasyLink-compliant devices with the following buttons on the remote control of your TV.
2 Press to select [Setup] > [Sound] > [TV speakers]. 3 Select [Automatic (EasyLink)]. » TV speakers are set to EasyLink mode. Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.
Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
• • • VGA Audio in USB Service connector Power • • • Mains power: AC 110-240 (50-60Hz) Standby power: < 0.15W Ambient temperature: 5 to 35 degrees Celsius Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. Warning • Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The remote control is not working properly: • Check that the remote control batteries are correctly inserted according to the +/- orientation. • Replace the remote control batteries if they are at or weak.
The picture does not t the screen; it is too big or too small: • Try using a different picture format. The picture position is incorrect: • Picture signals from some devices may not t the screen correctly. Check the signal output of the device. Sound issues audio cable is connected to AUDIO L/R or AUDIO IN (mini-jack only). Computer connection issues The computer display on the TV is not stable: Check that a supported resolution and • refresh rate is selected on the computer.
install channels automatic K B batteries bracket 17 23, 25 24 Kensington lock 22 L C Channel list troubleshooting update channels install automatic rename clock computer format technical speci cations connections HDMI troubleshooting mains cord technical speci cations troubleshooting 25 12 17 17 14 23 26 18 23 26 D demo display resolution 15 23 E EasyLink disable enable environmental care 22 13 menu child lock language main menu troubleshooting Multimedia technical speci cations 13 25 9 25 2
T technical specifcations timer sleeptimer standby transmission troubleshooting troubleshooting TV adjust volume menu screen care software standby switch channels switch off switch on troubleshooting tuner technical speci cations wall mount TV lock PIN code 23 13 13 25 25 8 9 4 15 7 7 7 7 25 23 3, 24 25 V Video format video format technical speci cations volume adjust 28 EN 23 8
EN 29 E n glish
© 2009 Koninklijke Philips Electronics N.V. All rights reserved.
