Register your product and get support at 52PFL7403D www.philips.com/welcome 47PFL7403D 42PFL7403D 52PFL5603D 47PFL5603D 42PFL5603D 42PFL5403D 32PFL5413D 32PFL5403D 52PFL3603D 47PFL3603D 42PFL3603D 42PFL3403D 32PFL3403D/85 EN User Manual EN: For further U.S.A., assistance, PUERTO 1-888-PHILIPS FR Manuel de I'utilisateur CANADA: nter below FR: Pour clientele OR U.S. the (French (1-888-744-5477) Serial obtenir No. located de I'aide de votre ntrez ci-dessous cabinet.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.comlwelcome to ensure: Know these PHILIP$ safetysymb01s RISK Congratulations on your purchase, and welcome to the "family!" CAUTION: OF ELECTRIC SHOCK OO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER [OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
iMPORTANT SAFETY Read before I. iNSTRUCTiONS operating equipment Read these instructions. C. 2. Keep these instructions. D. The appliance marked 3. Heed all warnings. 4. Follow all instructions. change 5. Do not use this apparatus 6. Clean only with near water. openings.
2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change to correct the interference following measures: without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their o Reorient respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Contents . Use yourTV .............................. Important Product information ............................. Use Philips EasyLinl< ............................ 25 Use the demo mode ............................ 25 5 Environmental care .............................. 5 notices .............................. 5 Change your TV installation Your TV ................................ 6 Television overview .............................. 6 Remote control .................................
1. 1.2 important Congratulations on your To fully benefit product purchase from the support and welcome that to Phitips! Phitips offers, register Screen care • Turn off and unplug the power • Clean the screen with a soft, dry cloth. Do not use substances such your cord before cleaning the screen. as household cleaning agents as these may damage the screen. at www.philips.com/welcome.
2. YourTV For more information aboutTV connections, see Connect your devices on page 31. This section describes the controls and functions of your TV. 2.7. 2.1 Television overview Front and side controls Remote control f 1 f 2 ACTIVE m4 DEMO --3 AUTO OPTION m_ k. 1. Power switch 2. Channel up/down 3. Menu The MENU key can be used as an OK key in some submenus. 4. Volume up/down 5.
3. Get started batteries 3. This section describes to perform how to position your first-time and connect line up correctly your TV, and how Note: installation. If you are not going to use the remote remove control for a long time, the batteries. Position theTY 3.1 3.3 O (inside of case is marked). Close the cover. Connect the antenna or cable Warning This section describes • Do not insert the power connections are made. • Large screenTVs handle the -iV.
• YPbPr (ComponentVideo • HDMI 3.4 Input) Connect the power WARNING: For information about how to connect a set-top box, see the Quick Start Guide provided. Connect cord a set=top box through RF IN/OUT if the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 and 4, or the channel specified by the voltage service printed if the 1. the Locate The Verify that at the back of theTV.
3.6 Switch on and setup theTV The -iV switches on automatically after connectingthe power cord. PHILiPS @ Next Press the GREEN Next Follow the on-screen button instructions your TV setup. Installation Note: located If you connect on your remote to select your takes approximately yourTV control to proceed. language and complete 10 minutes. to a cable box or satellite box, you do not need to install channels.
4. Use yourTY This section helps you perform basic TV operations. 4.2 WatchTV Switch channels I. 4.1 Switch yourTV on/off or to standby Press a number control. (I to 999) or press CH+ For digital channels, press a number To switch • Press theTV _ .... and then the corresponding 108.30. on POWER at the 2. Press @ Note Adjust gEM0 • Press _ on the remote on from by a dot (1 to 999). Ex. PREV CH to return to the previously by pressing viewed TV channel.
4.3 1. Watch channels from Switch on the set-top The picture from your 2. 1. box box. your set-top box might appear automatically on screen. Use the remote If the a set-top picture control does Press SOURCE not of your set-top box to select channels. appear repeatedly and wait a few seconds to select the for the picture connected set-top box to appear. f ...........................................................................................................................
5. Use more 4. of yourTY FORMAT Selects This section 5.1 describes Understand the advanced the features remote of your TV. control a picture 5. Color keys Selects tasks. 6. OPTION Activates format. See Change picture format on page 14. the quick access menu. For information, see Use the quick access menu on the next page. 7. OK To display the channel 1 8. Cursor buttons To navigate through 2 21 20-19-- 9. 3 @ACTIVE the menus. INFO program or accessorydevice.
5.2- Use the quick access menu 3. Press The quick access menu gives direct access to some often needed menu items. T and _ to select the Picture menu. TV menu TV Settings Picture Note 1. When digital channels options are displayed Press OPT|ON are installed and broadcast, in the quick access on the remote the relevant digital menu. control. 0EM0 OPTION :_Available in selected 4. 5. \ J models Press A or T to select enter the setting.
Summary of picture The following settings picture Summary settings can be configured. Depending on the format of the picture source, some picture settings might not be available. • Contrast • Brightness • Color • Tint • Sharpness • Color temperature warm or cool. of picture formats The following picture formats of the picture source, some can be selected. picture formats Depending on the format might not be available. - Sets the level of white in the picture.
Change sound This section 1. settings describes Press MENU Sound. Press how to adjust on the remote your control sound settings. and select TV settings > PHILIPS TV .... TV Settings Sound A or T to highlight a sound setting and press A or T to adjust the setting, and press _ to select the setting. Press OK to confirm the change. 4. Press Menu Summary to exit. of sound settings The following sound settings can be configured.
5.4 1. Use Auto Press Auto Mode Mode 5.5 to set your-iV to a predefined picture and sound setting. Create and use lists of favorite channels This sectiondescribeshow to create and use lists of your favorite channels. Select 1. a list of favorite channels Press the FAV key on the remote control. DEM0 AUTO AUTO OPTION \ 2. Press A or T to select " Personal The customized • settings: settings you defined by using the Picture menu.
5.6 Set the clock This section describes how set the time, date, time zone, Set the 1. Press and daylight time manually MENU Clock on > Auto the remote clock control and select Installation > mode. saving. 2. Set the Some time automatically digital channels the time automatically. and to choose which 1. Press MENU Clock 2.
5.8 Use child control This section describes Lock and rating locks how to lock or unlock theTV. You can set a personal identification number (PIN) and prevent your children watching certain programs or certain channels. Set or change 1. Press Change 2. your MENU from This section describes how to lock specified channels. The channels be selected but the screen is blanked out and the audio is muted. 1. PiN 2.
Use theTV YourTV ratings is equipped individual content program provider. based Press channels box must MENU allows you to control age rating and content access rating. data are sent by the broadcaster through by HDMI, you cannot box or cable that on their advisory If you are receiving connected Summary with aV-chip programs program 1. lock a set-top be connected on the remote through control or by the box or cable use the TV ratings to The box lock.
Use This the section Motion 1. movie describes Picture Press ratings lock how Association MENU Summary to control viewing of America on the remote of movies (MPAA) control based on their rating. and select Features > Child lock. 2. Select one of the menus for movie ratings Movie of US rating ratings All All items in the ratings list are locked. NR Not rated. G Movies with Movies for which PG lock.
Use the region ratings This section describes on downloaded how to control access to digital programs based region ratings. Before you download broadcast. 1. 5.9 lock a ratings table, ensure that regional ratings are Press MENU on the remote control Preferences > Downloaded and select rating table. Downloaded rating |nstal[ation The caption service caption text can be displayed muted. This section Preferences displays transmitted CC-,T-, permanently describes and CS- text.
Summary • of caption CC=I, services CC=2, CC=3, and Dialog and descriptions show on screen. for the action Usually used for alternate and T-4 Often for channel for Closed market Captions on the captioned CC I is the most languages T-1 ,T-2,T-3 used 5.10 used.
View 1. your After pictures connecting Multimedia on a USB your USB menu. device device Picture You can configure to the TV, press _ to enter the • is highlighted. Details the following / More Displays the picture stideshow. MyUSB features of the stideshow: details name, date, size, and next picture in the PHILIP$ • Picture Transitions Displays Picture • styles of the pictures. Slide time Sets • the list of available transition the time lag for picture transitions.
5.11 Use yourTV in HDTV mode 5.12 Not all models can be configured in HDTV mode. For information about your set, see the specification.
5.13 Use Philips EasyLink YourTV supports one-touch Philips EasyLink, which enables one-touch standby between devices must be connected One-touch EasyLink-compliant devices. play and Compliant to your TV via an HDMI connector. to devices that support one-touch play When you connect yourTV you can control yourTV and the devices with one remote example, when you press Play on your DVD remote Philips TV will automatically DVD content. One-touch switch to the correct play, control.
6. Change yourTV installation If you have forgotten your PIN, reset it as described in Set or change your PIN on page 18. The first time you switch on your TV you select the language for the TV 3. menus and make basic choices for picture and sound settings. Use this chapter to reinstall the TV, to set preferences in the TV menus, or to tune new TV channels. Select Cable • 1. Select Press your MENU menu on the language remote and select Installation Select a language 3.
6.5 Uninstail This section When describes a channel Uninstalled 1. Press and MENU channels how to uninstall is uninstalled channels Channels reinstall and reinstall it is removed are not reinstalled on the remote > Uninstall 6.7 during control a stored channel. from the list of channels. an installation and select update. |nstallation > Show emergency use by cable TV systems.
Download 7. Update yourTV the software software 1. On your PC, open a web browser and go to www.phiJips.com/ welcome. Philips continuously recommend available. tries to improve and we strongly 2. when updates are can be obtained from your dealer or downloaded the www.phiEps.com/welcome (e.g. website. 42PFLS603D/27) For information Use the type 3. from number 1. your Press MENU Current current on the software remote sof_:ware 7.
8. Connect devices 8.1 Connection overview f 75Q IV ANTENNA 5 1_ 0 2 =qlq 19_ LO 13 @ 14 | V HDMI 1 Eg HDMI 2 15 16 11 1. 2. 10 Antenna When you use the S-Video (AV3) for video signals, do not use the composite AV1 Component video input. Y Pb Pr and Audio DVD, digital receiver 3. @ Note: input L/P, connectors 10. HDM| for Second HDbll or game console, etc. video input on AV3 for video signals. 2 in in connector. 11. HDMil In First HDbll in connector.
8.2 Select your connection This section describes S-Video quality An analog connection, how you can enhance your audio visual experience by connecting connectors. - Good qualit 7 S-Video provides better picture quality than composite video. When connecting your device with S-Video, plug the S-Video cable to the S-Video connector on the side of the TV.
8.4 Connect your Connect devices a set-top box, DVD player/recorder and game console viaNDMI This section different describes connectors. used to connect examples When colors how to connect Note a selection that different types a device to your TV. The following only, other configurations a set-top composite sections with 75 "lr may be WANTEN_A @ describe are possible. connecting composite or component to the connectors on the TV.
Connect a set-top box via a composite Connect connector a digital home theater amplifier 75 Q WANTENnA 0 @@ TV ............. k Tv 1 If your device has an S-VHS video jack: For improved picture quality, connect a S-Video cable with the S-Video input ofAV3/side AV and connect AV. the audio cables to the audio L and R input jacks of AV3/side using the S-Video connector do not connect any device to the video jack of AV3 or the side AV.
Connect Connect Connect a PC a PC with an S-Video connector a PC with an HDMI connector 75 Q at the back WANTENNa @ 75_ "11" _AN_NNA @ TV TV i÷ ÷ O ,_o, 010 _®0 VDEO HDMII _ HDMI2 HDMI Connect a PC with an S-Video connector '_° at the side TV m_ _A_ENNA @ Connect a PC with a DVI connector 75 £2 mr" _ ANTENNA @ Li 0 TV _ L!0 i L0 SP_EFOUT ® _ _o,o VJDEO _l IN HDM'_ • J EN-33
9. Glossary Term Meaning DV| Digital Visual interface RGB signals S=VHS signals Red, Green and Blue signals Super-VHS signals by the A digital interface standard to convert monitors. signals into digital signals to accommodate analog created These are the three these signals improves picture are 2 separate Y/C video These The luminance recorded video video Digital Display Working signals, red, green & blue, which make up the picture.
10. Troubleshooting Symptoms No power Possible or indicator light. cause What The TV is not connected to the power. should 1. Press you do dD POWER at the right side of the TVI or press dD on the remote control. 2. Ensure the power to the power message on the screen with HDMI HDCP authentication fail. the power cord reconnect the power cord. that 2. Press then your HDNI SOURCE switch 3. Reset from Turn . Select .
1 1. Notes for the use of USB devices The following subsets of the Mass Storage Class specification are supported: The Digital • Content Only FAT (DOS) formatted supported. content.
12. Technical specifications Feature..... type n0, 7000 I S000' 42-52PFL7403D ...... 32PFL5403D/ 42-52PFL5603D 32PFL3403D/ 32-42PFL5413D ENHANCEMENT 768p 60Hz 1080p 60Hz 768p 60Hz 1080p 60Hz 5 ms 5 ms No No 500 cd/m2 Brightness 16:9 Aspect Ratio 2ms Response Thee 8 ms 5 ms Viewing Angles Built-in 42-52PFL3603D 42PFL3403D PtCTURE 1080p 120Hz 3OOO ...........
13.
MPEG artefact reduction 14 Register yourTV 5 Ratings 19 Remote control Multimedia 22 Music. See Photos and music Advanced use 12 U Basic use 6 Upgrade software Batteries 7 N Retail store Noise reduction 26 mode 28 USB 22 14 Connector 29 Notes on use 36 S O Screen care 5 One-touch play 25 Overview, Screen resolution, PC mode 24 M TV 6 Settings Version, software 15 Vertical shift Settings assistant 13 Set-top box, connection P Parental control.
14. Warranty WARRANTY COVERAGE: PHILIPS warranty below. obligation is limited to the terms Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold "AS iS" without warranty of any Idnd by including refurbished Philips set forth product WHO sold "AS iS" by some retailers.
©2007Koninkli]ke Phitips Electronics N.V. Allrights reserved.
