2671.2 aus AL 09-10-2007 10:40 Pagina 1 1 1.1 1.2 1.3 Important 3 Safety 3 Care of the screen 3 Recycling 3 2 2.1 2.2 Your TV 4 Television overview 4 Product highlights 5 3 3.1 3.2 3.3 3.4 3.5 3.6 Getting started 5 Position the TV 5 Wall mounting - VESA 6 Remote control batteries 8 Antenna cable 8 Connect the mains 9 First time installation 9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.
671.2 aus AL 09-10-2007 10:40 2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
1 09-10-2007 10:40 Pagina 3 Important Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions. • Stationary images Avoid stationary images as much as possible. If you can not, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time.
2671.2 aus AL 2 09-10-2007 10:40 Pagina 4 Your TV This section gives you an overview of the controls and functions of this TV. 2.
2.2 09-10-2007 10:40 Pagina 5 Product highlights Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... Full High Definition LCD display A full HD resolution of 1920x1080p, the highest resolution HD broadcast can transmit. It offers a brilliant flicker-free progressive scan picture with optimum brightness and superb colours. 3 Getting started ENGLISH 2671.
2671.2 aus AL 3.2 09-10-2007 10:40 Pagina 6 Wall mounting You can wall mount the TV with the supplied wall mount bracket. 3.2.1 Unmounting the TV stand The TV stand should be unmounted from the TV to allow the TV to be wall mounted. ‡ Unscrew the 2 screws that secure the stand to the TV. 3.2.2 Mounting the wall mount bracket ) Caution Wall mounting the TV requires special skills that should only be performed by qualified personnel.
09-10-2007 † Mount the 2 spacers at the back of the TV. 10:40 Pagina 7 on the 2 lower discs ‹ Connect all cables. See section 7 Connections. ENGLISH 2671.2 aus AL ≈Lift the TV into the wall mount bracket. º Calculate your TV’s ideal position. 686 mm 102 42" 752 mm 163 47" 1046mm 198 29kg 1157mm 253.5 2 Ú Secure the TV in the bracket by screwing in the 2 already fitted screws . 33kg ◊Position and level the wall mount bracket and fix the bracket firmly to the wall.
2671.2 aus AL 3.2.3 09-10-2007 10:40 Pagina 8 VESA compliant mounting ) Caution Use a VESA compliant bracket that meets safety standards according to the TV’s weight. Closely follow the instructions that come with your VESA compliant bracket to mount the TV. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or mounting that results in accident or injury. The TV is prepared for VESA compliant mounting. This bracket is not included.
2671.2 aus AL 10:40 Pagina 9 Connect the mains cord ENGLISH 3.5 09-10-2007 ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. The TV is never powered off completely unless the mains cord is physically unplugged. Therefore the mains plug must be accessible at all time. 3.
2671.2 aus AL 4 09-10-2007 10:40 Pagina 10 Use your TV Learn how to operate your TV for daily use. 4.1 Switch on or off - Standby To switch on the TV: • Press B Power at the left side of the TV if the standby led is off. • Press B on the remote control if the standby led in on. To switch to standby: • Press B on the remote control. B POWER + CHA To switch on from standby without remote control: • Press B Power at the side of the TV to switch off first and press B Power again to switch on.
4.2 09-10-2007 10:40 Pagina 11 Watch TV 4.3 4.2.1 Switch channels ‡ To switch TV channels: • Press a number (1 to 999) or press P+ or Pon your remote control. • Press Program/Channel - or + on the side controls of the TV. ® Press R to return to the previously viewed TV channel . Watch channels from a digital receiver ‡ Switch on the digital receiver. The picture from your receiver might appear automatically on your screen. ® Use the remote control of your digital receiver to select TV channels.
2671.2 aus AL 4.5 09-10-2007 10:40 Pagina 12 Watch a DVD 4.6 ‡ Insert a DVD disc in your player. ® Press Play π. The picture from your player appears automatically on your screen. Select a Teletext page Most TV channels broadcast information via Teletext. To watch Teletext: ‡ Press b. The main index page appears. If the picture does not appear: ‡ Press v on the remote control.
2671.2 aus AL 10:40 Pagina 13 Change Ambilight mode ENGLISH 4.7 09-10-2007 You can choose among four Ambilight modes: • Colour Sets Ambilight to a constant colour. • Relaxed Sets Ambilight to change soft and smoothly with the images on screen. • Moderate Sets Ambilight between Relaxed and Dynamic. • Dynamic Sets Ambilight to change quick and responsive. To change the Ambilight mode: ‡ Press Ambilight to switch on or off.
2671.2 aus AL 5 09-10-2007 10:40 Pagina 14 Use more of your TV This section deals with the more advanced use of your TV: • how to use the menus • to adjust the picture, sound and Ambilight settings • more about Teletext • how to create favourite channel lists 5.1 Remote control overview • • • • the advantages of Electronic Programme Guide how to set locks and timers to set subtitles and select a subtitle language how you can view your photos or play your favourite music from a USB memory device.
09-10-2007 10:40 Pagina 15 17 Volume up or down V To adjust the volume. 18 Menu To switch the menu on or off. 19 Option To switch the Quick access menu on or off. 20 Demo To switch the Demo menu on and to get a demonstration of the features of the TV. 21 Subtitles j To activate or deactivate the subtitle mode. 22 MHEG cancel No function. 5.2 TV menu overview ENGLISH 2671.2 aus AL With the on screen menus you install your TV, adjust picture, sound and Ambilight settings and access features.
2671.2 aus AL 09-10-2007 10:40 Pagina 16 5.2.2 Use of the menu Learn to use the menus with this example. ‡ Press Menu on the remote control. a OPTION OK LIST MENU MENU b BROWSE BROWSE The main menu appears on the screen. Television º Press π to enter the picture settings. Picture Contrast Contrast Brightness 90 47 Colour Hue 52 0 Sharpness 4 Tint Perfect Pixel HD HD Natural Motion ◊Press œ to select Brightness.
2671.2 aus AL 09-10-2007 10:40 Pagina 17 5.3 ‡ Press Option on the remote control. ® Press o or œ to select an option. Ò Press OK to show the selected option menu. † Press o, œ, p, π to adjust the settings in the menu. º Press Option to quit the menu. 5.3.1 Settings assistant Use the Settings assistant to guide you through basic picture, sound and Ambilight settings in an easy way. ‡ Press Menu on the remote control and select TV menu > TV settings > Settings assistant and press π to enter.
2671.2 aus AL 09-10-2007 10:40 Pagina 18 5.3.3 Picture settings This section describes how to adjust all picture settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Picture and press π to enter the list. ® Press o or œ to select a setting. TV settings Picture Settings assistant Contrast Brightness Reset to standard Sound Colour Hue Ambilight Sharpness Picture Tint Perfect Pixel HD HD Natural Motion 100Hz Clear LCD Dynamic contrast Noise reduction MPEG artefact red.
09-10-2007 10:40 Pagina 19 5.3.4 Widescreen picture format Avoid black bars on the sides or on top and bottom of the picture. Change the picture format to a format that fills the screen. ‡ Press q to switch on the Picture format menu. Unscaled (Only for HD and PC.) Maximum sharpness. Distortion may appear on borders. Black bars may appear with pictures from your PC. v q j MHEG CANCEL b q DEMO GUIDE a OPTION ENGLISH 2671.
2671.2 aus AL 09-10-2007 10:40 Pagina 20 • Audio language A list of audio languages for the current programme may be available when digital channels are installed and broadcasted. See also section 5.2.3 Quick access menu. To permanently change the audio language, see section 6 Channel installation. • Dual I/II If broadcasted, you can choose between two different languages. • Mono/stereo If stereo broadcasting is available, you can select Mono or Stereo per TV channel.
09-10-2007 10:40 Pagina 21 TV standby with Ambilight When the TV is in standby, you can switch Ambilight on. In this case Ambilight is only available as constant colour. ‡ Press Ambilight on the remote control when the TV is in standby. ® Press Mode repeatedly to select an available colour. i Ambilight 5.5 0 Ambilight MODE MODE Teletext Your TV has a 1200 pages memory that stores broadcasted teletext pages and subpages to reduce waiting time. To select a teletext page see section 4.
2671.2 aus AL 09-10-2007 10:40 Pagina 22 5.5.6 Teletext menu With the options in the teletext menu you can reveal hidden info, let cycle subpages automatically and change the character setting. • Reveal Hide or unhide hidden information on a page, such as solutions to riddles or puzzles. • Cycle subpages If subpages are available for the selected page, you can make subpages cycle automatically. • Language Some languages use a different set of characters.
09-10-2007 10:40 Pagina 23 5.6.3 Select a channel from a favourite list ‡ Press OK. The last selected channel list appears. ® Use o or œ to highlight a channel. Ò Press OK. The TV tunes to that channel. à Tip • Use -P+ to go through the TV channels of the selected favourite list. • With the number keys you can still select channels which are not marked as favourite. BROWSE V ¬ P P 1 2 3 4 5 6 7 8 9 i 0 Ambilight 0 - 9 5.7 Electronic Programme Guide - EPG - ENGLISH 2671.
2671.2 aus AL 09-10-2007 10:40 Pagina 24 Or ‘7 or 8 day’ EPG It may take some time to receive the EPG data. The list of TV programmes will show Programme guide 09:55 Next BBC ONE 07:50 Commonwealth 12:30 Commonwealth BBC TWO 09:50 Tweenies 10:15 Something Special five 09:00 The Wright Stuff 10:30 Trisha Goddard 12:00 This is BBC THREE BBC THREE 05:32 This is BBC THREE BBC FOUR 05:32 This is BBC FOUR abc1 09:20 Moonlighting Watch 12:00 This is BBC FOUR 10:15 Daddio Jump to ...
09-10-2007 10:40 Pagina 25 Did you forget your code ? ‡ Select Change code. ® Press π. Ò Enter the overriding code 8-8-8-8. † Enter a new personal code. º Confirm your new entered code. The previous code is erased and the new code is stored. 5.8.
71.2 aus AL 09-10-2007 10:40 Pagina 26 5.9.2 Activate or deactivate subtitling ‡ Press Menu on the remote control and select TV menu > Features > Subtitle and press π to enter the list. TV menu Features TV settings Features Subtitle Subtitle language Installation Sleeptimer Software update Child lock Set/Change code On timer 5.10 View and play: photos, MP3, ... Watch pictures or listen to music stored on a USB device (not supplied with the TV).
Afrika_2001 Afrika_2001 Paris_2005 My_car.jpg Jean.jpg Kenya.jpg Congo.jpg Victoria.jpg Mary.jpg Cairo.jpg Afrika_2001 Pagina 27 Afrika_2001 Kenya.jpg Congo.jpg Victoria.jpg Dakar.jpg Kenya.jpg 5.10.4 Thumbnails View the pictures of a selected album in an overview. ‡ Select a picture album. ® Press π to enter the picture list. Ò Press the green key. † Press o or œ, p or π to highlight a picture. º Press OK to view the picture. ◊Press p to return to the thumbnail overview.
2671.2 aus AL 09-10-2007 10:40 Pagina 28 5.11 Listen to radio channels If digital broadcasting is available, digital radio channels will be installed during installation. To listen to a digital radio channel: ‡ Press OK on the remote control. The All channels menu is displayed. ® Use the number keys to select a radio channel. To reorder see section 6.3.3 Reorder the channels. Ò Press OK.
09-10-2007 10:40 Pagina 29 5.12 Software update 5.12.2 Software download from the PC to the USB device Philips continuously tries to improve its products. It may be recommended for you to update the TV’s software. To update your TV software you need a USB Memory device (not supplied). ‡ Insert the USB memory device into a PC linked to the internet. ® Locate and open the file “update.htm” on your USB device. Ò Read the instructions on screen and click on the Send ID button.
2671.2 aus AL 09-10-2007 10:40 Pagina 30 Ò The update process starts automatically. Please wait. ◊The TV switches off.The screen stays black for about 10 seconds. Please, wait. USB The update is finished when the message ‘Operation successful’ appears on the screen. Pr ‹The TV switches back on again.The update is done. g Operation Successful! Re USB † Remove the USB memory device from the TV. 5.12.
6 09-10-2007 10:40 Pagina 31 Channel installation The first time you switched on your TV you’ve selected the language of the TV menus and allthe available channels have been installed. This chapter will help you if you find it necessary to re-do the initial installation or if you want to tune in a new analogue TV channel. rNotes: - You do not have to follow every step described if it is not necessary.
2671.2 aus AL 09-10-2007 10:40 Pagina 32 6.2 Analogue: Manual installation You can tune-in analogue TV channels channel by channel manually with Manual installation. 6.2.1 Select the system ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Analogue: Manual installation. ® Press π to enter the Manual installation menu. System is highlighted. Ò Press π to enter the System list. † Press o or œ to select your TV system: PAL BG 5.5 MHz, PAL I 6.0 MHz, PAL DK 6.
09-10-2007 10:40 Pagina 33 6.3.2 Uninstall or reinstall a channel To uninstall a stored channel so that it is no longer possible to tune to. Reinstall an earlier uninstalled channel. ‡ Press Menu on the remote conrol and select TV menu > Installation > Channel installation > Rearrange. ® Press π to enter the channel list. Ò Press o or œ in the channel list to select the channel you want to uninstall or reinstall. † Press the green key to uninstall or reinstall the channel. º Press Menu to quit the menu.
2671.2 aus AL 09-10-2007 10:40 Pagina 34 7 Connections 7.1 Connection overview 3 2 1 12 Y USB 13 14 Pb Pr AUDIO L/R R AUDIO L 15 EXT 3 EXT 2 VIDEO EXT 1 S-VIDEO 16 4 5 L R COMMON INTERFACE AUDIO OUT DISPLAY SYNCHRONIZED 6 7 8 9 HDMI 1 HDMI 2 11 OUT IN DIGITAL AUDIO HDMI 3 SERVICE UART ANTENNA DISPLAY SYNCHRONIZED. Back connectors 1 EXT1 Scart connector for DVD,VCR, digital receiver, game console, etc. 2 EXT2 Second scart connector.
7.2 09-10-2007 10:40 Pagina 35 About connecting Learn here how to make the best connection for your device. Six connections are ready to use at the back of the TV - EXT1, EXT2, EXT3, HDMI1, HDMI2 and HDMI3. Connect your device with the highest possible quality connection. Look for the highest quality connection on your device. Use that connection to your TV. Connection set up When connecting is done the TV needs to know what connections you made, which device is connected to which connector.
2671.2 aus AL 09-10-2007 10:40 Pagina 36 7.2.4 Scart - Good quality ★★★ One cable combines video and audio signals. Scart connectors can handle RGB video but no HD TV signals. 7.2.6 Video - Basic quality ★ Use a Video (cinch) cable together with an Audio L/R (cinch) cable. Match the cable colours when you connect Scart cable Combined Video - yellow and Audio L/R cable - red and white Use the supplied scart to cinch adaptor with the switch in the IN position to connect devices to EXT 1 or 2.
2671.2 aus AL 10:40 Pagina 37 Connect your devices ENGLISH 7.3 09-10-2007 The connections shown in this section are recommendations for the most used cases. Other solutions may be possible. 7.3.1 DVD player Use a scart cable to connect the device to the EXT1 input at the back of the TV. Y Pb Pr AUDIO L/ R EXT 3 L EXT 1 OUT R AUDIO OUT EXT 2 IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA DVD Player 7.3.2 DVD Recorder or Digital Receiver Use a scart cable and 2 antenna cables.
2671.2 aus AL 09-10-2007 10:40 Pagina 38 7.3.4 DVD Recorder and Home Theatre System Use a scart cable, 2 antenna cables and 1 digital audio (cinch) cable. Y Pb Pr AUDIO L/ R DIGITAL AUDIO OUT L R AUDIO OUT EXT 3 EXT 2 EXT 1 OUT IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA OUT DIGITAL AUDIO IN IN DVD Recorder Home Theatre System 7.3.5 DVD Recorder and DVD Home Theatre System Use 2 scart cables, 2 antenna cables and 1 digital audio (cinch) cable.
2671.2 aus AL 09-10-2007 10:40 Pagina 39 HD Digital receiver / HD satellite receiver Use a HDMI cable and 2 antenna cables. ENGLISH 7.3.7 Y Pb Pr AUDIO L/ R EXT 3 L EXT 1 HDMI OUT OUT IN OUT R AUDIO OUT EXT 2 IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA HD Digital receiver / HD Satellite receiver 7.3.8 DVD-R, Home Theatre System and Digital receiver Use 3 scart cables, 3 antenna cables and 1 audio (cinch) cable.
2671.2 aus AL 09-10-2007 10:40 Pagina 40 7.3.10 Game console The most practical connection for a game console is at the side of the TV. More qualitative connections are at the back of the TV. Connected at the side of the TV Use the Video and Audio L/R (cinch) connectors. R AUDIO L VIDEO S-VIDEO 7.3.12 Personal Computer The best connection for a PC is at the back of the TV. A more practical connection, but only for viewing photos and films from your PC, is the connection at the side of the TV.
7.4 09-10-2007 10:40 Pagina 41 Connections setup When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector. 7.4.1 Digital Audio In (if present) If you use the Digital Audio In connection, assign this connection, in the menu, to the device from where the sound comes from. ‡ Press Menu on the remote control and select TV menu > Installation > Connections > Digital Audio In. ® Press π to enter the list.
2671.
9 09-10-2007 10:40 Pagina 43 Troubleshooting No digital channels found during installation • Verify if the TV supports DVB-T in your country. See the list of countries on the TV typeplate. Television and remote control Picture The TV does not switch on • Verify the mains cord connection. • Verify if the batteries of the remote control are flat or weak. Verify their + / - orientation. You can use the keys on the TV to switch the TV on.
2671.2 aus AL 09-10-2007 10:40 Pagina 44 Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with the ¬ key. • Verify if all cables are connected properly. • If no sound signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate malfunction. The sound is poor • Verify if the sound is set to Stereo. • Verify the Equalizer settings.
2671.
2671.2 aus AL 09-10-2007 N Naming devices 41 Noise reduction 18 O OK key 14 On timer 24 10:40 Pagina 46 Standby 24 Super zoom 19 Stationary images 3 Stereo 20 Subtitle 25 shift 19 Switch on 10 T P Perfect Pixel HD 18 Personal Computer connect 40 display resolutions 42 Photo viewer 26 Picture format 18 menu 18 Position the TV 5 Power 10 Programme up/down 14 Table of Pages T.O.P 21 Technical data 42 Teletext 21 teletext 2.
