Register your product and get support at EN User Manual 57PFL7603D 52PFL7603D 47PFL7603D 42PFL7603D EN: For further assistance, call the customer support service in your country. • U.S.A., PUERTO RICO, OR U.S. VIRGIN ISLANDS: 1-888-PHILIPS (1-888-744-5477) FR Manuel de l’utilisateur • ES Guía del usuario Enter below the Serial No. located on the rear of the cabinet.
Downloaded From TV-Manual.
*Proof of Purchase *Product Safety Notification *Additional Benefits Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service. By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.
ENGLISH FRANÇAISE ESPAÑOL )-0/24!.4 3!&%49 ).3425#4)/.
The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
ENGLISH Contents 1.
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 1.2 Screen care • Turn off and unplug the power cord before cleaning the screen. • Clean the screen with a soft, dry cloth. Do not use substances such as household cleaning agents as these may damage the screen. • To avoid deformations or color fading, wipe off water droplets as soon as possible.
ENGLISH 2. Your TV For more information about TV connections, see Connect your devices on page 31. This section describes the controls and functions of your TV. 2.1 2.2 Remote control Television overview Front and side controls 1 FRANÇAISE 2 VOLUME AMBILIGHT 4 ON/OFF MODE 3 3 MENU CHANNEL 2 ESPAÑOL 4 1 POWER 5 5 1. Power switch 2. Channel up/down 6 3. Menu The MENU key can be used as an OK key in some submenus. 7 4. Volume up/down 5.
This section describes how to position and connect your TV, and how to perform your first-time installation. 3.1 Position the TV BBWarning • Do not insert the power plug into the wall socket before all the connections are made. batteries line up correctly (inside of case is marked). 3. Close the cover. DDNote: If you are not going to use the remote control for a long time, remove the batteries. 3.
ENGLISH FRANÇAISE • YPbPr (Component Video Input) • HDMI 3.4 Connect the power cord For information about how to connect a set-top box, see the Quick Start Guide provided. BBWARNING: Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the power cord if the voltage is different.
3.6 Switch on and setup the TV FRANÇAISE ENGLISH The TV switches on automatically after connecting the power cord. Thank you for your purchase of this PHILIPS TV. Please proceed with the following steps to set-up your TV. For the BESTpossible picture performance, contact your local Cable / Satellite signal provider for High Definition signal options available in your area. Next ESPAÑOL Press the GREEN Next button located on your remote control to proceed.
ENGLISH 4. Use your TV 4.2 Switch channels This section helps you perform basic TV operations. 4.1 Switch your TV on/off or to standby FRANÇAISE To switch the TV on • Watch TV Press . POWER at the right side of the TV. 1. Press a number (1 to 999) or press CH+ or CH- on your remote control. For digital channels, press a number (1 to 999) followed by a dot "." and then the corresponding sub channel number (1 to 999). Ex. 108.30. 2. Press PREV CH to return to the previously viewed TV channel.
4.3 Watch channels from a set-top box ENGLISH 1. Switch on the set-top box. The picture from your set-top box might appear automatically on your screen. 2. Use the remote control of your set-top box to select channels. If the picture does not appear ESPAÑOL FRANÇAISE 1. Press SOURCE repeatedly to select the connected set-top box and wait a few seconds for the picture to appear. 2. Use the remote control of your set-top box to select channels. 4.4 Watch connected devices 1.
ESPAÑOL FRANÇAISE ENGLISH 5. Use more of your TV 4. FORMAT Selects a picture format. See Change picture format on page 14. This section describes the advanced features of your TV. 5. Color keys Selects tasks. 5.1 6. OPTION Activates the quick access menu. For information, see Use the quick access menu on the next page. Understand the remote control 7. OK To display the channel list or to activate a setting. 1 21 20 19 AMBILIGHT ON/OFF MODE 18 2 3 4 5 6 7 17 16 15 8 9 10 8.
Use the quick access menu The quick access menu gives direct access to some often needed menu items. DDNote When digital channels are installed and broadcast, the relevant digital options are displayed in the quick access menu. 1. Press OPTION on the remote control. 3. Press ï and Æ to select the Picture menu. ENGLISH 5.
ENGLISH FRANÇAISE ESPAÑOL Summary of picture settings Summary of picture formats The following picture settings can be configured. Depending on the format of the picture source, some picture settings might not be available. The following picture formats can be selected. Depending on the format of the picture source, some picture formats might not be available. • Contrast - Sets the level of white in the picture. • Brightness - Sets the brightness of the picture.
5.4 This section describes how to adjust your sound settings. This section describes how to adjust your Ambilight settings. 1. Press MENU on the remote control and select TV settings > Sound. Change Ambilight settings ENGLISH Change sound settings Turn Ambilight on/off 1. Press AMBILIGHT ON/OFF on the remote control. TV Settings Sound Settings assistant Equalizer Picture Balance Sound Digital audio language Ambilight Alternate audio 2.
ESPAÑOL FRANÇAISE ENGLISH 5.5 Use Auto Mode 1. Press Auto Mode to set your TV to a predefined picture and sound setting. 5.6 Create and use lists of favorite channels This section describes how to create and use lists of your favorite channels. Select a list of favorite channels 1. Press the FAV key on the remote control. 2. Press Î or ï to select one of the following settings: • Personal The customized settings you defined by using the Picture menu.
Set the clock Set the time automatically 1. Press MENU on the remote control and select Installation > Clock > Auto clock mode. 2. Press Î or ï to select Manual, and press Í to confirm your choice. Some digital channels transmit the time. For these channels, you can set the time automatically. Follow these steps to set the time automatically and to choose which channel to read the time from. TV menu I Installation 1. Press MENU on the remote control and select Installation > Clock > Auto clock mode.
ENGLISH 5.9 Use child control and rating locks This section describes how to lock or unlock the TV. You can set a personal identification number (PIN) and prevent your children from watching certain programs or certain channels. Set or change your PIN FRANÇAISE This section describes how to lock specified channels. The channels can be selected but the screen is blanked out and the audio is muted. 1. Press MENU on the remote control and select Features > Child lock > Channel lock. 2. Enter your PIN. 1.
Use the TV ratings lock Your TV is equipped with a V-chip that allows you to control access to individual programs based on their age rating and content rating. The program content advisory data are sent by the broadcaster or by the program provider. Age rating Content rating All None None None If you are receiving channels through a set-top box or cable box connected by HDMI, you cannot use the TV ratings lock. Your set-top box or cable box must be connected through RF or AV connectors.
ENGLISH Use the movie ratings lock Summary of US movie ratings This section describes how to control viewing of movies based on their Motion Picture Association of America (MPAA) rating. Movie rating Description All All items in the ratings list are locked. 1. Press MENU on the remote control and select Features > Child lock. NR Not rated. G Movies with a mild content, suitable for all ages. 2. Select one of the menus for movie ratings lock.
Before you download a ratings table, ensure that regional ratings are broadcast. 1. Press MENU on the remote control and select Installation > Preferences > Downloaded rating table. TV menu Installation Preferences Downloaded rating table Location Off Show emergency alerts On Downloaded rating table If you select Off, you choose not to download the region rating table and you cannot use the region rating lock. 3. Press Í to return to the TV menu and select Features > Child lock > Region ratings lock.
ESPAÑOL FRANÇAISE ENGLISH Summary of caption services • CC-1, CC-2, CC-3, and CC-4 Dialog and descriptions for the action on the captioned TV program show on screen. Usually CC 1 is the most used. CC 2 can be used for alternate languages if they are being transmitted. • T-1, T-2, T-3 and T-4 Often used for channel guide, schedules, bulletin board information for Closed Captions programs, news, weather information, or stock market reports.
1. After connecting your USB device to the TV, press Æ to enter the Multimedia menu. Picture is highlighted. • Details / More details Displays the picture name, date, size, and next picture in the slideshow. • Transitions Displays the list of available transition styles of the pictures. • Slide time Sets the time lag for picture transitions. • Rotate Rotates a picture. • Zoom Displays a list of available zoom magnifications. • Start show/Stop show Starts or stops a slide show.
ENGLISH FRANÇAISE ESPAÑOL 5.12 Use your TV in HDTV mode 5.13 Use your TV as a PC monitor Not all models can be configured in HDTV mode. For information about your set, see the specification. For information how to connect a PC to your TV see Connect a PC on page 33. Use an HDMI-DVI cable or an HDMI-DVI adaptor. For sound, add an audio cable with a stereo mini jack. When you connect a high definition (HD) device to your TV, you must configure the display format of your TV.
5.14 Use Philips EasyLink ENGLISH Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected to your TV via an HDMI connector. One-touch play FRANÇAISE When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control.
ENGLISH 6. The first time you switch on your TV you select the language for the TV menus and make basic choices for picture and sound settings. Use this chapter to reinstall the TV, to set preferences in the TV menus, or to tune new TV channels. 6.1 FRANÇAISE Change your TV installation If you have forgotten your PIN, reset it as described in Set or change your PIN on page 18. 3. Select Cable or Antenna and press OK. • When Antenna is selected, the TV detects antenna signals.
This section describes how to uninstall and reinstall a stored channel. When a channel is uninstalled it is removed from the list of channels. Uninstalled channels are not reinstalled during an installation update. 1. Press MENU on the remote control and select Installation > Channels > Uninstall channels. 6.7 Show emergency alerts (EAS) The SCTE18 standard defines an emergency alert signalling method for use by cable TV systems.
FRANÇAISE ENGLISH 7. Update your TV software Philips continuously tries to improve its products and we strongly recommend that you update the TV software when updates are available. Download the software 1. On your PC, open a web browser and go to www.philips.com/ welcome. 2. Find information and software related to your TV and download the latest software upgrade file to your PC. New software can be obtained from your dealer or downloaded from the www.philips.com/welcome website.
Connection overview ENGLISH 8.1 TV ANTENNA 2 1 3 4 R R R L L L Pr 5 R SPDIF OUT Pr Pb HDMI 1 11 L 13 TV ANTENNA VIDEO L R Y R AV 2 AV 3 HDMI 2 10 R SERV. VU S-VIDEO HDMI 3 9 VIDEO DVI AUDIO IN 14 HDMI 4 15 USB 16 8 1. Antenna input 2. AV1 Component video input. Y Pb Pr and Audio L/R connectors for DVD, digital receiver or game console, etc. 3. AV2 Second component video input. 4.
Select your connection quality This section describes how you can enhance your audio visual experience by connecting your devices with the best possible connectors. HDMI - Highest quality ESPAÑOL FRANÇAISE ENGLISH 8.2 HDMI produces the best audio visual quality possible. Both audio and video signals are combined in one HDMI cable, providing an uncompressed, digital interface between your TV and HDMI devices. You must use HDMI to experience full high definition video.
TV ANTENNA When connecting composite or component cables, match the cable colors to the connectors on the TV. Connect a set-top box and a DVD player/recorder via composite connectors R R R L L L Pr Pr Pb Pb Y Y SERV. U SPDIF OUT VIDEO L S-VIDEO BBWarning R AV 1 HDMI 1 AV 2 AV 3 HDMI 2 DVI AUDIO IN HDMI 3 Do not place your recorder too close to the screen because some recorders can be susceptible to signals.
Connect a digital home theater amplifier ENGLISH Connect a set-top box via a composite connector TV ANTENNA TV ANTENNA Or/Ou/O RF OUT R R R L L L ESPAÑOL FRANÇAISE Pr SERV. U L + R + VIDEO SPDIF OUT Pr Pb Pb Y Y VIDEO AV 1 R AV 2 R R L L L Pr Pr Pb Pb Y Y SERV.
Connect a PC with an S-Video connector at the back ENGLISH Connect a PC with an HDMI connector Connect a PC TV ANTENNA TV ANTENNA R R L L L Pr Pr R R L L L Pr Pr Pb Pb SERV. U SERV.
ESPAÑOL FRANÇAISE ENGLISH 9. Glossary Term Meaning DVI Digital Visual Interface A digital interface standard created by the Digital Display Working Group (DDWG) to convert analog signals into digital signals to accommodate both analog and digital monitors. RGB signals Red, Green and Blue signals These are the three video signals, red, green & blue, which make up the picture. Using these signals improves picture quality.
What should you do The TV is not connected to the power. 1. Press . POWER at the right side of the TV, or press . on the remote control. 2. Ensure the power cord is connected tightly to the TV power connector and to the power socket outlet. 3. Remove the power cord from the power socket outlet, wait 60 seconds and reconnect the power cord. 4. Connect the TV to a different power socket outlet. Error message on the screen with HDMI connection. HDCP authentication fail. 1.
ESPAÑOL FRANÇAISE ENGLISH 11. Notes for the use of USB devices • • The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class Specification Overview” (v1.2, June 23, 2003) including all documents referenced by the document. The document can be found on the USB standardization website (www.usb.org). Digital Content Issues • Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting can result in unreadable content.
Feature Description Type no. 42-57PFL7603D ENGLISH 12.
ENGLISH 13.
R Home or retail store 26 Movie 20 Tint 14 PC 24 Region 21 TV Model number 5 Model number 5 TV 19 Movie expand 14 Recycling 5 Overview 6 Movie ratings 20 Region ratings 21 Position 7 MPEG artefact reduction 14 Register your TV 5 Multimedia 22 Ratings 19 Remote control Music.
ESPAÑOL FRANÇAISE ENGLISH 14. Warranty PHILIPS LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. WHO IS COVERED: Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer.
© 2007 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: 12NC: 3139 125 39453 Downloaded From TV-Manual.
