-,.%'/,012)301#0)43(/15641.
Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 Tour 3 Smart TV 3 App gallery 3 Rental videos 3 Online TV 3 Social networks 3 Skype 4 Smartphones and tablets 4 Pause TV and recordings 4 Gaming 4 EasyLink 5 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Setting up 6 TV stand and wall mounting 6 Tips on placement 6 Power cable 6 Antenna 7 Satellite dish 7 Network 7 Connect devices 9 Setup menu 17 Safety and care 19 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.
1 Tour 1.1 Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV with your tablet.
1.5 Social networks No need to get up to check your friend's messages on your computer. Open Smart TV, select your social network page and send a message back from your couch. Operate your TV from your smartphone or tablet, switch channels or change the volume. With the MyRemote app, you can use your phone or tablet to send photos, music or videos from your computer to your TV.
The TV uses 3D technology to show both screens. To play a two-player game with two different full screen pictures, you need a pair of 3D glasses for each player. In Help, press * List and look up Game console or Twoplayer games for more information. 1.10 EasyLink With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected devices. In Help, press * List and look up EasyLink for more information.
2 Setting up 2.1 TV stand and wall mounting - 46PFL9707 - VESA MIS-F 300,300,M6 - 60PFL9607 - VESA MIS-F 400,400,M6 Preparation Remove the 4 screws on the back of the TV that cover the VESA screw holes. Do not use these 4 screws to fix the accessory wall mount bracket. To fix the bracket securely, use a screw length as shown in the drawing. TV Stand The foot of the TV stand has the TV loudspeakers built-in.
When disconnecting the power cable, always pull the plug, never the cable. 2.6 Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. In Help, press * List and look up Standby for more information on switching the TV on and off. Network Wireless connection What you need 2.4 Antenna To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet.
Step 2 - Press h and select S Setup and press OK. Step 3 - Select Connect to network and press OK. Step 4 - Select Wireless and press OK. Step 5 - Select Scan to scan for your wireless network. If you have a router with WPS (Wi-Fi Protected Setup), you can select WPS. Select your choice and press OK. • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network.
Media server software With media server software on your computer, you can open your photos, music and videos stored on your computer on your TV screen. Use a recent version of media server software like Windows Media Player 11, Twonky™ or similar*. Install the software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. To open your files on TV, the media server software must be running on your computer.
HDMI ARC All of the HDMI connections on the TV have ARC (Audio Return Channel). If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
EasyLink settings EasyLink HDMI CEC HDMI CEC With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC* to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection. * Consumer Electronics Control EasyLink setup The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.
CAM Insert a CAM module Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and the TV. Use the Common Interface slot on the left side of the TV to insert the CAM card*. Gently insert the CAM as far as it will go and leave it in the slot permanently. It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV.
Select TV settings > General settings > Switch off timer and set the slider bar to 0. Audio to video sync Connect With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised. A mismatch can be visible in scenes with people talking - when they finish sentences before their lips stop moving or just the opposite. Use an HDMI cable to connect a Home Theatre System (HTS) to the TV.
Audio Out levelling affects both the Audio Out - Optical and HDMI-ARC sound signals. Blu-ray Disc Player Use an HDMI cable to connect the Blu-ray Disc player to the TV. For best quality, use an HDMI cable to connect the game console to the side of the TV. If the game console is connected with HDMI and has EasyLink HDMI CEC, you can operate the game console with the TV remote control. Alternatively, use a SCART adapter (not supplied) to connect the game console to the TV.
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformating for use with a computer. In Help, press * List and look up Pause TV or Recording to pause or record TV channels.
In Help, press * List and look up USB mouse, to connect a USB mouse. In Help, press * List and look up Videos, photos and music, to watch or listen to content from an USB flash drive. USB mouse You can connect a USB mouse (USB-HID type) to navigate pages on the Internet. On an Internet page, you can select and click on links more easily. The USB mouse cannot navigate in Smart TV App pages nor navigate in the TV menus.
Computer You can connect your computer to the TV and use the TV as a PC monitor. Ideal monitor setting If your computer is added as a Computer type of device in the Source menu (list of connections), the TV is set to the ideal Computer setting automatically. With VGA Use a VGA cable to connect the computer to the VGA connector and add an audio L/R cable to connect the VGA Audio to AUDIO IN - VGA/DVI on the back of the TV.
To set a Quick picture settings on a TV activity or a connected device . . . 1 - Press h, select an activity or a connected device (or its connection) and press OK. 2 - Press h agian, select S Setup and press OK. 3 - Select Quick picture settings and press OK. Go through the steps and finish. The activity or connection has your personal preferences. Satellite settings Languages In Help, press * List and look up Audio language or Subtitles for more information.
The TV monitors the incoming picture quality, the level of motion in the picture, brighter or darker scenes and the light conditions in your room. With these values, the TV adjusts the picture for best performance. • Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. • Teach children about the dangers of climbing on furniture to reach the TV. 2.
Temperature and humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction.
3 TV 3.1 Switch on Switch on and off Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the small key A on the right, on the back of the TV to put the TV on standby - the red indicator will light up. With the TV on standby, press A on the remote control to switch the TV on. Alternatively, you can use the CH+, CHand h key to switch the TV on. Quick start With Quick start, the TV can start up faster than usual.
Top half 1 - A Standby To switch the TV on or back to standby. 2 - Playback and record keys • Play x, to playback • Pause p, to pause playback • Stop q, to stop playback • Rewind !, to rewind • Fast Forward ‹,to wind fast forward • Record r, to record now 3 - GUIDE To open or close the TV guide. 4 -c SOURCE To open or close the list of connections. 5 - h Home To open or close the home menu. 6 - L LIST To open or close the channel list or your list of photos, music or videos.
3 - y Spacebar key 4 - Arrow keys 5 - Enter Press Enter to confirm the text you entered. 6 - Backspace Deletes the character in front of the text cursor. Shift To type an uppercase character, press and hold the ( (Shift) key (2) and type the uppercase character you need. If you only need 1 uppercase character in your text, press the ( key just before typing the character you need.
Before you can use pointer, the TV needs an update of its software. The new TV software with the pointer function will be available around the second half of 2012. If the TV is connected to the Internet, you will be notified when new TV software is ready to install. When the update for the pointer is done, the Smart TV start page will notify you when the remote control can use the pointer. In Help, press * List and look up Software, Internet update for more information.
To pair a new - not yet paired - TV with a remote control which is already paired with another TV, hold the Remote control close to the Philips logo (about 10cm) and press the * Red and * Blue key at the same time. A message will appear if pairing is successful. Batteries The TV will notify you when the battery power of the remote control is low. To replace the batteries, open the battery compartment at the back of the remote control.
Universal access With Universal access switched on, you can set some options for hearing impaired and visually impaired people. In Help, press * List and look up Universal access for more information. While watching a TV channel, press L LIST to open the channel lists. Select one of the channel lists. Video selection Digital TV channels can offer multi video signals (multi-feed broadcasts), different camera viewpoints or angles of the same event or different programmes on one TV channel.
Use the remote control keypad as you do for SMS/text messaging to enter a character. The moment you start typing the on screen keyboard appears. You can select lowercase, uppercase, special characters and backspace with the colour keys. Press b to delete a character. Select Done to end Rename. 3 - With the arrow keys, reposition the channel where you want it. Alternatively, you can enter the new position directly with the number keys. 4 - Press OK to confirm the position.
Change code To change the current Child lock code, press h, select S Setup and press OK. Select Channel settings > Child lock > Change code. Enter the current code and then enter the new code twice. The new code is set. Forgotten your code? If you have forgotten your code to unlock, call Consumer Care in your country. Find the telephone number on the documentation that came with the TV or go to www.philips.com/support.
Current version You can check the current version of the TV software with Current version. Copy channel list Copy a channel list 1 - Switch on the TV which has its channels installed. Plug in a USB memory device. 2 - Press h, select S Setup and press OK. 3 - Select TV settings > General settings > Channel list copy > Copy to USB and press OK. To copy the channel list from this TV, you might be asked to enter the Child lock code you entered during the installation.
With the Symbol rate mode set to Automatic, the TV will use 1 of the predefined symbol rates as used by most cable providers in your country. If you know your cable provider is not offering digital channels, you can skip searching for digital channels. Select Off. Symbol rate 1 Analogue channels Symbol rate 1 With the Symbol rate mode set to Manual, you can enter here the symbol rate value you received from your cable provider. To enter the value, use the number keys.
To set up the TV system, select System and press OK. Select your country or the part of the world where you are now. 2 - Find channel To find a channel, select Find channel and press OK. Select Search and press OK. You can also enter a frequency yourself. If the reception is poor, press Search again. If you want to store the channel, select Done and press OK. 3 - Fine tune To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with u or v.
Text options In Text, press o OPTIONS to select the following: • Freeze page • Dual screen • T.O.P. overview • Enlarge • Reveal • Cycle subpages • Language Freeze page To stop the automatic rotation of subpages, press o OPTIONS and select Freeze page. Dual screen / Full screen To show the TV channel and Text alongside each other, press o OPTIONS and select Dual screen. Select Full screen to switch back to full screen view.
* Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV guide information. Receiving TV guide info The first time you open the TV guide, the TV scans all TV channels for programme information. This may take several minutes. TV guide data is stored in the TV. The TV guide receives information (data) from broadcasters or from the Internet.
When you connect a new device to the TV, the device is detected automatically and put in the Source menu. The device is shown as an icon (the device type) and has a name. If the device type does not correspond with the device, e.g. the TV says it is a player but it is not, you can change the type. To change the type of the device, press * Device type and select a type that fits the device and press OK. If the name does not fit the device or you want to give the device a name of your own, press * Rename.
If none of the preferred subtitle languages are available, you can select another subtitle language which is available. In Help, press * List and look up Universal access for more information. To set the primary and secondary subtitle language . . . 1 - Press h, select Setup and press OK. 2 - Select Channel settings and select Languages > Primary subtitles or Secondary subtitles and press OK. 3 - Select a language and press OK. 4 - Press b, repeatedly if necessary, to close the menu.
Switch off timer If you do not press a key on the remote control during a 4 hour period, or if the TV receives no input signal and receives no remote control commands for 10 minutes, the TV switches off automatically to save energy. If you use the TV as a monitor or use a digital receiver to watch TV (a Set-top box - STB) and you do not use the remote control of the TV, you should deactivate the automatic switch off. To deactivate, press h, select S Setup and press OK.
• • • • • • • Vivid - Ideal for daylight viewing Natural - Natural picture settings Movie - Ideal for watching movies Energy saving - Energy-conscious settings Standard - Factory standard settings Photo - Ideal for viewing photos ISF Day and ISF Night - ISF Calibration settings Shop or Home location If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting for in store promotion. To set the TV for Home use . . .
While watching a TV channel, press oOPTIONS to open the Options menu and select Sound style. Select a Sound style and press OK. • Infrared remote control signals can be disturbed by Ambilight. Position your devices (disc player or Home theatre system) away from Ambilight. Sound styles With Sound styles, you can switch easily to ideal settings for speech (News) or watching movies. Additionally, you can adjust a specific setting of a chosen Sound style, like Bass or Treble.
When the TV is on, you can toggle with the AMBILIGHT key between the Ambilight modesOff, Dynamic and Static. Select Dynamic, if Ambilight should respond to onscreen images. Select Static if you want to set a specific fixed colour. Ambilight brightness To set the Ambilight brightness, select Brightness and press OK. Adjust the light output of Ambilight. Ambilight dynamic To adjust the speed at which Ambilight responds to onscreen images, select Dynamic.
To switch on the commentary (if available) . . . 1 - With Universal access switched on, press o OPTIONS and select the Options tab in the menu bar. 2 - Select Visually impaired and press OK. 3 - Select On and press OK. You can check if a visually impaired audio commentary is available. In the Options menu, select Audio language and look for an audio language marked with a Ï. In Help, press * List and look up Universal access for more information.
4 Watch satellite 4.1 Satellite channels Switch channels In this channel list, you can look up all installed satellite TV and radio channels. Next to the list All, which holds all installed channels, you can set up a list of Favourites, view the installed Radio stations separately or discover the newly added channels in New. To switch to a channel from a channel list While watching a satellite channel, press L LIST to open the channel lists. Select the satellite icon Ò in the menu bar.
Add or remove favourites To add or remove favourite channels from the Favourite channel list, open the list and press o OPTIONS, select Add / remove favourites and press OK. Use the arrow keys to select a channel and press OK to add or remove it from the favourites list. Enter text with the on-screen keyboard To open the on-screen keyboard on top of the text entry menu, press OK or any number key when the cursor in the text flashes.
To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels. Set an age rating Press h and select S Setup and press OK. Select Satellite settings > Child lock > Parental rating. To select an age rating, you must first enter your 4-digit child lock code. If no child lock code is set, you can set the code now. When the code is entered, you can select the age rating.
Find the list of preset satellites on this TV in LList > Specifications > Power and reception. Add a satellite If satellite channels are already installed, you can add an extra satellite to the installation. You can install channels from 4 different satellites - 4 LNBs. 1 - Connection type Check the Connection type setting before you add a satellite. The setting Single receives only one LNB, the setting DiSEqC Mini receives only 2 LNBs and the setting DiSEqC 1.0 can receive 3 or 4 LNBs.
Conditions • Both TVs are from the same year range. • Both TVs have the same product type suffix for DVB (H, K, M, T or D/00) in their type number and have the TV installed for the same country. • Both TVs have an identical satellite installation setting. • Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA • Both TVs have compatible software versions.
• Check the connection type in the satellite installation settings. • Reset all satellite settings if you lost track of the settings you changed. In Help, press * List and look up Satellite installation for more information. The reception of a satellite channel is poor • Check the orientation of the satellite dish. Sometimes the reception is poor • Check if the satellite dish is solidly mounted. Strong winds can move the dish. • Snow and rain can degrade reception.
5 3D 5.1 What you need This is a 3D Max TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution with 3D Max. To watch 3D you need to : • tune to a TV channel that broadcasts programmes in 3D • rent a movie in 3D from an online video store with Smart TV • watch a movie in 3D from a 3D Blu-ray Disc, a USB device or computer Also, to watch 3D on this TV, you will need one of these types of Philips 3D Max active glasses. . .
1 2 3 4 - A, On or off switch - Player 1/2, Player 1 or player 2 selection - Receiver lens - Battery compartment When you unpack the 3D glasses, also remove the small plastic foil from the battery compartment that prevents the battery from running empty. Switch on When a 3D programme is offered, press A on the 3D glasses and put them on. The glasses need some seconds to adjust to the 3D signal from the 3D transmitter on the TV. At first use, this may take up to 15 seconds.
To change the 3D depth, press oOPTIONS and select 3D depth. Select Off (no 3D), Less (less 3D depth), Normal (optimal 3D quality) or More (more 3D depth). 3D experience With 3D experience you can adapt flicker on the screen in order to increase the ease of viewing 3D content. To change the flicker reduction, press oOPTIONS, select 3D experience and select Maximum clarity (more 3D effect, more flicker) or Flicker free (less flicker, less tiring). 5.
6 6.2 6.1 What you need Smart TV Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu To open the Home menu, press h. Select an activity using the arrow keys and press OK to start the activity.
Open Smart TV To open the Smart TV start page, press Smart TV. Alternatively, you can press h, select Smart TV and press OK. With Search, you can search the App gallery for relevant Apps. Enter a keyword in the text field, select l and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories.
To return to the Smart TV start page, press L LIST or b. Consult the video store regarding the rental duration of rental movies. Add an App to your list In the App gallery, select the App icon and press OK. Select Add and press OK. Alternatively, select Add and move to add it and immediately position the App where you want it in your list. Internet traffic Streaming or downloading many videos may exceed your monthly Internet traffic limit. Start an App To start an App, press h and select Smart TV.
If you try to pause or record a programme with a USB Hard Drive connected, the TV will ask you to format the USB Hard Drive. This formatting will delete all current files on the USB Hard Drive. From a computer If the TV and the computer are in the same network, the TV can browse and play files stored on your computer. This TV uses the DLNA protocol and is compatible with other DLNA devices. On your computer, you need to install media server software like Twonky™ to share your files with the TV.
To make a 10-second jump forward or backward in a video, press x or w. To rewind or go fast forward, press ! or ‹. Press the keys several times to speed up - 2x, 4x, 8x, 16x, 32x. To stop the video playback, press q (Stop). Info To view info on a video (playhead position, duration, title, date, etc.), select the video and press i INFO. Press again to hide the info. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
You can press w repeatedly until you reach the start of the broadcast buffer or the maximum time span. Progress bar With the progress bar on screen, press ! (Rewind) or press ‹ (Forward) to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed. Specifics • The Audio Description audio (commentary) for the visually impaired is not available for playback in Pause TV or Recording. • You can buffer the digital (DVB) subtitles of channel.
You can use the ‹ (Forward), ! (Rewind), p (Pause) or q (Stop) keys on the remote control. The MyRemote App is continually being developed. Future versions will have new functions and will be gradually available. Regularly check the MyRemote App updates on the App stores. * The MyRemote App version 3.0 will be available in second half 2012. App functions The App functions vary according to version and the device on which you use the App.
Media server software If you want to view your photos or play your music and videos from your computer on the TV, you have to install media server software on your computer. Setup this media server software to share your files on your home network. This TV uses the DLNA protocol and is compatible with other DLNA devices. In Help, press * List and look up DLNA, supported media servers for the list of media server software that is compatible with the TV.
App functions TV guide SimplyShare If you have a tablet, you can call up the TV guide of your TV on your tablet. You can consult the TV schedule and read programme info. You can tap the programme title to switch to the TV channel directly. With SimplyShare, you can send media files like photos, music or videos from a device in your home network to another device in your network.* To open SimplyShare in the MyRemote app, tap the SimplyShare button in the MyRemote App menu.
What you need To watch TV on your smartphone or tablet with Wi-Fi smart screen . . . • you must have digital TV channels installed on your TV • the TV must be switched on • your home network must be a secured network. Secure your network with WEP, WPA, WPA2 or set it up using WPS. • you must have the setting Wi-Fi smart screen switched on. Press h (home) > Setup > Network settings > Wi-Fi smart screen. How to buy Tap Wi-Fi smart screen in the App menu to open the function.
If you stop Wi-Fi smart screen outside a Quick start time frame, the TV stays in Quick start for 5 minutes to allow you to start Wi-Fi smart screen again without having to switch on the TV itself. In Help, press * List and look up Quick start for more information on Quick start. To switch the TV on standby, tap the TV A button in the tool bar.
7 Skype 7.1 What is Skype? With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV. Point the camera to the position you usually sit at. In the Skype settings, you can test the camera, check its viewpoint or set the zoom level. You can position the camera anywhere you want but it is recommended to put it away from the speakers of the TV.
Your contacts can see that you are online but you do not wish to be disturbed. They can call you and you will be alerted with sound. No emergency calls No emergency calls - Skype is not a replacement for your telephone and cannot be used for emergency calling. - Invisible You will appear to be offline to all of your contacts, but you can still use Skype as usual. You can use Skype without being disturbed by incoming calls. 7.
On a voice call, you can still switch to a Video call. To switch to Video call, press * Camera on. Block a contact You can block any Skype user from finding you online. A blocked contact will be unable to contact you with Skype. A blocked contact will not be notified, you will always appear to be offline in the contact list of the blocked contact. On the ! Contacts page, select a contact and press * Block contact. You can always unblock a contact.
Also, new contact requests will be shown immediately. Skype during rental movies and Pause TV While you are watching a rental movie from a broadcaster or video store, or using Pause TV, accepting a Skype call will interrupt the movie or paused programme. To resume watching the rental movie, you need to go back to the video store or broadcast service. Some video stores and services do not allow you to restart the movie. The Pause TV programme storage is lost.
Navigate to the menu bar and select S Settings to open the Settings page. Select Online status and then select the online status you want your contacts to see when you are online and press OK. Select Sign out to quit Skype on your TV. 7.8 Terms of Use Read the Terms of Use of Skype at www.skype.com/go/tou Ringtone volume Also read the Privacy Statement at www.skype.com/privacy You can adjust the Skype ringtone volume. Navigate to the menu bar and select S Settings to open the Settings page.
8 Games 8.1 Play a game With a game console connected to the TV, you can play games on TV. Start a game Switch on the game console and press h, select the icon you have set for your game console (e.g. Game or Player) and press OK to view the game. Ideal game setting For some games, where speed and precision is needed, set the TV to the ideal Game setting before you start playing.
9 To check the relative power consumption, press h > Setup > Watch demos > Active control and press OK. Select a setting to check the corresponding values. 9.1 European energy label TV Specifications Environmental Saving energy Energy saving bundles the TV settings that help the environment. While you are watching TV channels, press * to open Eco settings. Active settings are marked with a fi. Press * again to close.
9.2 Power Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/support Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C • Standby power consumption : < 0.1W • Power saving features : Light sensor, Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu. Energy label class - 46PFL9707 : class t.b.d. - 60PFL9607 : class t.b.d.
• Containers : 3GP, AVCHD, AVI, DivX®, MPEG-PS, MPEGTS, MPEG-4, Matroska (MKV), Quicktime (MOV), Windows Media (ASF/WMV/WMA) • Video Codecs : DivX®, MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4 Part 10 AVC (H264), VC-1, WMV9 • Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby Digital, Dolby Digital Plus, MPEG-1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.
10 TV Software 10.1 Software version To view the current TV software version, press h, select S Setup and press OK. Select Software settings and press OK. Select Current software info and see Version: . . . . 10.2 Software update Software update from Internet If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you carry out the update. Select Update.
11 Support 11.1 Register Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. Go to www.philips.com/welcome 11.2 Using help and search On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs).
12 Copyrights and licences 12.1 HDMI HDMI® The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 12.2 Dolby Dolby® Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 12.
Connectivity guide 9 Index 3 3D depth 48 3D glasses PTA507, use 47 3D glasses PTA508, use 48 3D glasses, type 47 3D, 2D to 3D 48 3D, cleaning glasses 49 3D, experience 49 3D, health warning 49 3D, optimal viewing 49 A Active control 19 Ambilight colour 39 Ambilight, dynamic 38 Ambilight, mode 39 Ambilight, placement 38 Ambilight, setup 38 Ambilight, switch on or off 38 Ambilight, TV placement 6 Ambilight, TV switch off 39 Antenna connection 7 Antenna connection, tips 9 App, feedback 51 App, gallery 51 App,
Mixed volume 40 Mono / Stereo 37 Moth eye 19 Mouse, connect 16 Music files, playback 53 MyRemote App, Control 58 MyRemote App, download 57 MyRemote App, JointSpace 56 MyRemote App, menu 57 MyRemote App, network 56 MyRemote App, SimplyShare 58 MyRemote App, TV guide 58 MyRemote App, versions 56 MyRemote App, Wi-Fi smart screen 58 N Network frequency 30 Network frequency mode 30 Network router 7 Network, DHCP 8 Network, password 8 Network, settings 9 Network, Static IP 8 Network, wired 9 Network, wireless 7 O
Subtitles 34 Subtitles, pause TV 55 Subtitles, recording 55 Switch off timer 67 Symbol rate 30 Symbol rate mode 29 Synchronize audio and video 13 T Television on Demand 52 Text 31 Text, dual screen 32 Text, freeze 32 Text, options 32 Text, setup 32 Text, T.O.P.
L"#&(%&+,#;"'-(&,"# !"#$%&'%( HMHH+NNN+OONP 7)/#"0+3,'/0+HMIH+NNN+OOMG )$*#'+,-,)$*#'.
