-,.%'/,012)301#0)43(/15641.
!"#"$%$&'()(*+),*-$./)+)01$2+-345'()31$6787 9++$5):/41$5-1-5;-<7$=0-3)>)3?4)'(1$?5-$1@A,-34$4'$3/?(:-$B)4/'@4$ ('4)3-7$C5?<-D?5*1$?5-$4/-$05'0-54E$'>$&'()(*+),*-$./)+)01$2+-345'()31$ 6787$'5$4/-)5$5-10-34);-$'B(-517 .
Contents 1 1.1 1.2 1.3 1.4 1.5 To begin 4 TV tour 4 Setting up 10 Keys on the TV 16 Register your TV 18 Help and support 19 2 2.1 2.2 2.3 2.4 2.5 2.6 Use your TV 20 Remote control 20 Menus 23 Watch TV 27 Watch a connected device Ambilight 32 Net TV 34 3 3.1 3.2 3.3 3.4 3.5 3.6 More on ... 37 Text 37 Interactive TV 39 Multimedia 40 Locks and timers 42 Subtitles and languages Universal access 44 4 4.1 4.2 4.3 4.4 4.5 Setup 45 Picture, Sound, Ambilight Channels 46 Network 47 Devices 48 Software 50 5 5.
1 To begin 1.1 TV tour The remote control To open or close the Home menu h . In the Home menu, you can start or stop a TV activity. Like watching TV or watching a movie from a connected DVD player. To adjust the volume. To open or close the Browse menu e. In the Browse menu, you can open Text, the Channel list or the TV programme guide. To switch TV channels.
To open or close the Options menu o . Back b. In the Options menu, you can select settings related to what is shown on screen. With Back you go back to the previous TV channel or go one step back in a menu. While you watch a channel, mark it as a favourite or stop the slideshow of your photos shown on screen. Red To open or close the Adjust menu s. With the red key, you select the red option or open digital Interactive TV services or some TV demonstration clips.
Green Blue With the green key, you select the green option or the Eco settings. With the blue key, you select the blue option. Read more about the remote control in Help > Use your TV > Remote control > Overview. Or go to the ¬ Search page to look for any topic. Press u to select the next TV tour . The TV menus Yellow With the yellow key, you select the yellow option or the Help menu. You can operate the TV with the 4 menus. Discover and learn their specific uses.
To open or close the Home menu h . To open or close the Options menu o Open the Home menu as a starting point to operate the TV. Open the Options menu to select a setting related to what is shown on screen. In the Home menu, you can start or stop a TV activity. Like watching TV - Watch TV - or watching a movie from a connected DVD player. While you watch a channel, mark it as a favourite but also open the DVD disc menu while watching a DVD movie. To open or close the Browse menu e.
To connect a DVD, Blu-ray Disc player or game console, use the HDMI connection. The HDMI connection offers the best picture and sound quality and, if your device has EasyLink (HDMI -CEC), the TV can add the device in the Home menu automatically. When a device is added in the Home menu, you can select it to watch its programme. If the device has no EasyLink or you do not use the HDMI connection, you must add the connected device in the Home menu using Add your devices.
Contact your dealer for more information. Go to www.philips.com/support to find FAQs featuring the list of HD channels or providers in your country. Network and Net TV PC network You can connect the TV to your PC network. Enjoy your pictures, videos and music files from your PC on a big TV screen. Read more about PC Network in Help > Setup > Network. Net TV If you have an Internet connection on your home network, you can connect to Net TV.
1.2 Setting up Wall or stand mounting The 2-in-1 stand that comes with the TV, can be used as a tabletop stand or as a wall mount bracket. Instructions to mount the 2in-1 stand are also included in the printed Start guide. Read the instructions on the following pages. Unscrew the bolt in the middle of the bar with the supplied hex key. Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel.
Turn the bar as shown. Reposition the bar on the stand and fix the bolt with the hex key. Fix the stand to the TV.
The TV is mounted at the correct height if your eyes are level with the centre of the screen when you sit down. Distance between the 2 fixing points . . . - 81cm/32" = 260mm - 94cm/37" = 300mm - 102cm/40" = 300mm - 117cm/46" = 340mm Fix the 2 mounting discs. Use screws with a diameter of max 6mm.
Slide the bottom plate of the stand onto the mounting discs. To level the TV, pull the bottom of the TV towards you slightly and let it slide on the discs. Unscrew the bolt and turn the bar in the position shown.
VESA info Your TV is prepared for a VESA-compliant wall mount bracket (not included). VESA codes to purchase the bracket: - 81cm/32" VESA MIS-F 100,100,M6 - 94cm/37" VESA MIS-F 200, 300, M6 - 102cm/40" VESA MIS-F 200, 300, M6 - 46PFL8505/8605 : VESA MIS-F 200, 300, M6 - 46PFL9705 : VESA MIS-F 300, 300, M6 - 132cm/52" VESA MIS-F 400, 400, M6 Use a screw length as shown in the drawing. Positioning the TV Carefully read the safety precautions before positioning the TV.
• Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. • Educate children about the dangers of climbing on furniture to reach the TV. Risk of overheating! Always leave a space of at least 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms.
1.3 Keys on the TV Power switch Switch the TV on or off with the power switch at the bottom of the TV. When switched off, the TV does not consume any energy. J Ambilight Press J (Ambilight), to switch Ambilight on or off. If the red indicator light is off, switch on the TV with the power switch. If the red indicator is on (standby indication), press O on the remote control to switch on the TV. Alternatively, you can switch on the TV from standby with any key on the TV.
CH Channel Press CH (Channel) - or + to switch channels. Or use the W or X keys on the remote control.
1.4 Register your TV Congratulations on your purchase and welcome to Philips. Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. Go to www.philips.
1.5 Help and support Using Help and Search TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Help You can open Help from the Home menu. In most cases, you can also press the Yellow key on your remote control to open or close Help directly. For some activities, like Text, the colour keys have specific functions and cannot open Help.
2 Use your TV 2.1 Remote control Overview 1 Standby O To switch the TV on or back to standby. 2 Home h To open or close the Home menu. 3 Navigation key To navigate up, down, left or right. 4 OK key To activate a selection. 20 5 Browse e To open or close the Browse menu. 6 Next W To switch to the next channel, page or chapter. 7 Previous X To switch to the previous channel, page or chapter. 8 Options o To open or close the Options menu. 9 Back b To go back to the previous channel.
13 Red colour key To open interactive TV or to select a Text page. 14 Green colour key To open the Eco settings or to select a Text page. 15 Yellow colour key To open and close Help or to select a Text page. 16 Blue colour key To select a Text page. In general, these keys open the following device menus: 1 Home menu 2 Setup menu 3 Disc menu (disc content) 4 Pop -up menu 5 Options menu 6 Programme guide 7 Media selection Read more about EasyLink in Help > Setup > Devices > EasyLink HDMI-CEC.
Remove the batteries if you are not using the remote control for a long time. Dispose of batteries according to the end of use directives. Read Help > To begin > Setting up > End of use. Cleaning Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV or remote control.
2.2 Menus h Home With the Home menu, you can start watching TV or a movie disc or start any other activity. You can add an activity when you connect a device to the TV. Press h to open the Home menu . To start an activity , select it with the navigation keys and press OK. To close the Home menu, press h again. If your connected device does not have EasyLink (HDMI -CEC) or is not connected with an HDMI cable, you need to manually add your device with Add your devices in the Home menu.
Channel list options With the Channel list on screen, you can press o (Options) to select the following options : • Select list • Mark as favourite • Reorder • Rename • Hide channel • Show hidden channels Select list Use this option to select which channels are shown in the Channel list. The list you select here determines which channels you look through with W and X while watching TV. Mark as favourite When a channel is highlighted in the Channel list, you can set it as a favourite channel.
Enter text with the remote control keypad Use the navigation keys to position the cursor in the text. Press b (Back) to delete a character. Use the remote control keypad as you do for SMS/text messaging to enter a character. Use the 1 key to select a special character. Select Clear to delete a character. Select Done to end Rename. Enter text with the on-screen keyboard To open the on-screen keyboard on top of the text entry menu, press OK when the cursor in the text blinks.
In the Adjust menu you can adjust the following: • • • • • • • • Ambilight On or Off Ambilight dynamics Picture format Smart picture (presets) Smart sound (presets) Speakers Surround Picture shift Ambilight Read more about the Ambilight settings in Help > Use your TV > Use Ambilight. Picture format Read more about the Picture format settings in Help > Use your TV > Watch TV > Picture format. Smart picture, Smart sound You can set the TV to the pre-defined setting that best suits what you're watching.
2.3 Watch TV Switch channels To watch TV and switch TV channels, make sure the Watch TV activity is selected in the Home menu. To watch TV, press h , select Watch TV and press OK. To switch TV channels , press W or X on the remote control. You can use the number keys if you know the channel number or you can use the Channel list to select a channel. To switch back to the previous channel, press b (Back). Channel list pages The channel list can have several pages.
Set up a favourite channel While watching TV, press e to open the Browse menu. Select Channel list and press OK. Navigate to a channel you want to mark as favourite and press o (Options). Select Mark as favourite. In the Channel list, the favourite channel is marked with a F. You can unmark a favourite channel with Unmark favourite. Only watch your favourite channels You can set the Channel list to show only your favourite channels. With the list on screen, press o (Options) and select Select list.
Broadcaster or Network To select where the Programme guide information comes from, press h > Setup > TV settings > Preferences > Programme guide. Select From the network or From the broadcaster. From the network Until you link up with Net TV, programme guide information comes from the broadcaster. Once you are connected with Net TV, the TV switches automatically to the Internet for programme guide information. From the broadcaster Guide information comes from the broadcaster/operator.
• Movie expand Scales the picture to a 16:9 format. • Wide screen Stretches the picture to a 16:9 format. • Unscaled Expert mode for HD or PC input. Pixel for pixel display. Black bars may appear with pictures from a PC. Switch to standby If the TV is on, press O on the remote control to switch to standby. The red standby key indicator is on. Although the TV consumes very little power when on standby, energy does continue to be consumed.
2.4 Watch a connected device Select a device When a connected devices is added to the Home menu, you can easily select it. To select and watch a connected device or activity, press h to open the Home menu and select the device or its activity and press OK. Make sure the device is switched on. Read more about Add your devices in Help > Use your TV > Menus > Home menu. Use the TV remote control The TV remote control can operate a device if the device is connected with HDMI and has EasyLink (HDMI -CEC).
2.5 Ambilight Benefits With Ambilight, you enjoy a more relaxed viewing experience and improved perceived picture quality. Dim the lighting conditions in the room and position the TV up to 25cm away from the wall for the best Ambilight effect. To prevent poor infrared remote control reception, position your devices out of sight of Ambilight. Ambilight brightness In the Adjust menu, select Ambilight brightness and press OK. Adjust the light output of Ambilight.
To change the Lounge light mood colour scheme, press J on the TV again. To switch off Lounge light mood, press and hold J on the TV for 3 seconds. You can also set up the colour scheme in the Setup menu. With the TV switched on, press h and select Setup. Select TV settings > Ambilight > Lounge light mood. Select the colour scheme with which Lounge light mood will start up.
2.6 Net TV What is Net TV ? Net TV offers Internet services and websites tailored for your TV. You can visit popular sites, look at infotainment, or rent a movie from a video store. Net TV pages The most popular websites in your country have tailored their web pages for use on TV. Read the newspaper headlines, watch the latest video hit or check the weather forecast. Net TV programme guide Once you are connected to Net TV, the TV programme guide uses the Internet to gather its information.
To open Net TV, close this Help and press h , select Browse Net TV and press OK. The TV links up to Net TV and opens the Start page. To exit Net TV, press h and select another activity. Only Net TV services can be marked as favourites. Advertisements and Internet websites cannot be marked. Unmark favourites To Unmark a favourite, select the icon of a favourite service and press o (Options) and select Unmark favourite.
Clear Net TV history With a site icon selected in the history list, you can clear the whole list. Press o (Options) and select Clear history. Video stores To enter a number code (PIN), use the numbers on the remote control. To enter an email address, select the text field on the page and press OK. Select a character on the keyboard and press OK to enter it. With this TV, you can rent a video from an online video store . 1 Open a video store. 2 Select a video. 3 Make the online payment.
3 More on ... 3.1 Text Text pages Open Text To open Text, while watching TV, press e (Browse) and select Text. To close Text, press b (Back). Text sub-pages A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press w or x. T.O.P. Text pages Some broadcasters offer T.O.P. Text. To open T.O.P. Text within Text, press o (Options) and select T.O.P. overview.
In Text, press o (Options) to select the following: • Freeze page • Dual screen • T.O.P. overview • Enlarge • Reveal • Cycle subpages • Language Freeze page To stop the automatic rotation of subpages, press o (Options) and select Freeze page. Dual screen / Full screen To show the TV channel and Text alongside each other, press o (Options) and select Dual screen . Select Full screen to switch back to full screen view. T.O.P. overview To open T.O.P. Text, press o (Options) and select T.O.P. overview.
3.2 Interactive TV Benefits Interactive TV can offer additional infotainment or programmes on a digital TV channel. Interactive TV is dependent on the country or broadcast. Benefits range from enhanced text to online TV and much more. For some iTV services, you need a high-speed connection to the Internet. Read Help > Setup > Network. Use iTV To open iTV, press the Red key while watching a digital channel. If interactive TV is available, the Home page of the broadcaster opens.
3.3 Multimedia Browse USB You can view photos or play your music and videos from a USB memory device. Insert a USB device in the USB connection on the left-hand side of the TV while the TV is switched on. The TV detects the device and opens a list showing its content. If the list does not appear automatically, press h , select Browse USB and press OK. To To To To To pause or play, press OK. play the next file in the folder, press W. play to the previous file, press X. fast forward, press x.
Select a photo for Scenea 1 Select a photo from a connected USB device or from a connected PC. This photo must be in JPEG format. 2 With the photo highlighted in the Browse USB or Browse PC list, press o (Options) , select Set as Scenea and press OK. By agreeing to overwrite the current photo, the new photo is set. Scenea lounge light To switch off Ambilight when Scenea is on, press s (Adjust). Or press J (Ambilight) on the front of the TV.
3.4 Locks and timers Child locks To prevent children from watching a channel or a programme, you can lock channels or block age-rated programmes. Parental rating Some digital broadcasters have programmes rated. When the rating is equal or higher than the rating you have set for your child’s age, the programme will be blocked. To watch a blocked programme you must enter the Child lock code. The parental age rating is set for all channels.
3.5 Subtitles and languages Subtitles Programme subtitles are available most of the time. You can set subtitles to be constantly displayed. How to set constant subtitles depends on whether a channel is analogue or digital. For digital channels, a preferred subtitle language can be set. For analogue channels To show subtitles of a channel, switch to the channel and press e (Browse), select Text and press OK.
3.6 Universal access Switch on With Universal access switched on, the TV is set for use for hearing and visually impaired people. Switch on To switch on Key beep, press o (Options), select Universal access and press OK. Select Key beep and select On. If Universal access does not appear in the Options menu, switch on Universal access in the Setup. Read Help > More on … > Universal access > Switch on. Switch on If you did not switch on Universal access at first use, you can still switch it on in Setup.
4 Setup 4.1 Picture, Sound, Ambilight — Gamma is a non-linear setting for picture luminance and contrast. Use the slider bar to set a higher or lower gamma value. • PC mode Sets the TV to the ideal pre-defined computer setting if a computer has been connected. You can adjust each Smart setting with the settings in Picture or Sound in Setup, TV settings. Adjust the brightness for a particular Smart picture or adjust the bass for a Smart sound.
4.2 Channels Reorder and rename You can reorder and rename channels in the Channel list. To reorder or rename a channel, read Help > Use your TV > Menus > e Browse. Update channels On first use, the TV installed all channels in the Channel list. If the TV installed digital channels, the TV can automatically update the Channel list with new channels. You can also start an update of the Channel list yourself. The update is for digital channels only.
4.3 Network Network settings Benefits To open the Network settings, press h > Setup > Network settings and press OK. Browse PC If you connect the TV to a home network, you can play photos, music and videos from your computer or storage device. Once the network is installed on the TV, you can find and play the files from your PC on the TV screen. You can view the network type, IP and MAC address, the signal strength, speed and encryption method etc.
4.4 Devices EasyLink HDMI-CEC Rename a device To rename an added device or activity, press o (Options) and select Rename. Use the keypad on the remote control as you do for SMS/text messaging to enter the new name. With the TV remote control you can operate devices that have EasyLink (HDMI-CEC) and are connected with an HDMI cable. Devices with EasyLink automatically show their activity in the Home menu. The TV comes with EasyLink switched on.
With a delay value set up on the HTS, you need to switch off Audio Out delay on the TV if the HTS has this delay set up for all its output connections. To switch off Audio Out delay, press h and select Setup > TV settings > Preferences > Audio Out delay. Select Off and press OK. If you cannot set up a delay on the HTS or its maximum setting is insufficient, you can switch off the Perfect Natural Motion picture processing of the TV.
4.5 Software Current version To view the current TV software version, press h > Setup > Software settings and press OK. Select Current software info and read Version: . . .. Update from Internet Do not . . . • press O twice • use the O switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory.
5 Connections 5.1 First connections Power cable Insert the power cable in the power socket of the TV. When disconnecting the power cable, always pull the plug, never the cable. Although this TV has a very low standby power consumption, switch off the TV with the power switch to save energy if you do not use the TV for a long period of time. Read more about the power switch in Help > To begin > Keys on the TV > Power switch. Make sure the power cable is securely inserted in the TV.
5.2 About cables Cable quality Before you connect devices to the TV, check which connectors are available on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound. Read the other chapters of About cables . The connections diagrams shown in Help > Connections > Connect devices are recommendations. Other solutions are possible. HDMI An HDMI connection has the best picture and sound quality.
Video If you have a device with only a Video (CVBS) connection, you need to use a Video to Scart adapter (not supplied). You can add the Audio L/R connections. Connect the adapter to the Scart connection of the TV. VGA Use a VGA cable (DE15 connector) to connect a computer to the TV. With this connection you can use the TV as a computer monitor. You can add an Audio L/R cable for sound. To connect a computer with the VGA connection, read Help > Connections > Connect more devices > TV as PC monitor.
5.3 Connect devices SoundBar Use an HDMI cable to connect the device to the TV. If you use the HDMI -ARC connections on both TV and device, no other cable is needed. If not, read on. If you do not use the HDMI -ARC connection, add a digital audio cable (cinch coaxial). Blu-ray Disc / DVD player Use an HDMI cable to connect the device to the TV.
Home Theatre System with disc player Use an HDMI cable to connect the device to the TV. If you use the HDMI -ARC connections on both TV and device, no other cable is needed. If not, read on. If you do not use the HDMI -ARC connection, add a digital audio cable (cinch coaxial).
Audio to Video synchronisation (sync) If the sound does not match with the video on screen, you can set a delay on most DVD Home Theatre Systems to match the sound and video. Read more about Audio to Video sync in Help > Setup > Devices > Audio to Video sync. Do not connect the audio signal from a DVD player or other device directly to the Home Theatre System. Always route the sound through the TV first. Recorder Use 2 antenna cables to connect the antenna to the device and the TV.
Digital receiver / Sat. Use 2 antenna cables to connect the antenna to the device and the TV. Add an HDMI cable to connect the device to the TV. Dig. receiver + Disc Recorder First, use 3 antenna cables to connect the devices to the TV. Then use an HDMI cable to connect the digital receiver to the TV.
Finally, use an HDMI cable to connect the Disc Recorder to the TV. Dig. receiver + Disc-R + Home Theatre First, use 3 antenna cables to connect the devices to the TV. Then use an HDMI cable to connect the digital receiver to the TV.
Then use an HDMI cable to connect the Disc Recorder to the TV. Then use an HDMI cable to connect the Home Theatre System to the TV. If you do not use the HDMI -ARC connection on the TV and the device, add a digital audio cable (cinch coaxial).
Digital HD receiver First, use 2 antenna cables to connect the device to the TV. Use an HDMI cable to connect the device to the TV.
5.4 Connect more devices Game Connect a game console to the side or back of the TV. You can use an HDMI, YPbPr or Scart connection. If your game console only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to Scart adapter to connect to the Scart connection. Picture delay To prevent picture delay while gaming, close Help and press s (Adjust) and select Smart picture > Game and press OK. After gaming, do not forget to select the Smart picture you normally use for watching TV.
If the list with the content of the camera does not appear automatically, your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. Camcorder Connect a camcorder to the side or back of the TV. You can use an HDMI, YPbPr or Scart connection. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to Scart adapter to connect to the Scart connection.
TV as PC monitor You can connect the TV to your computer as a PC monitor. Before connecting the PC, set the PC monitor refresh rate to 60 Hz. See the following pages for how to connect your computer. Use a VGA cable to connect the PC to the VGA connector and an audio L/R cable to connect the VGA Audio L/R to the back of the TV. Use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable to connect the Audio L/R to the back of the TV.
Ideal TV setting Set the TV Picture format to Unscaled for the sharpest picture quality. While watching TV, press o , select Picture format and select Unscaled. For a list of supported resolutions see Help > Specifications > Display resolutions. Decoder Use a scart cable to connect a decoder that decodes analogue antenna channels. Use the EXT1 or EXT2 connectors on the back of the TV. You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected.
5.5 Network Wired To set up the wired network connection, read Help > Setup > Network Connect the router to the TV with a network cable. To fullfill EMC regulations, use a shielded FTP Cat. 5E ethernet cable. Select the router you need and press Easy connect if the router has WPS. Or press Pin code if you can enter the PIN code in your router software to connect. Or press Custom to enter the encryption key manually. PIN code To make the secured connection with a PIN code, select PIN code and press OK.
Wi-Fi MediaConnect Help To read the Wi-Fi MediaConnect Help, right click the program icon in the notification tray of the PC and select Help. Specifics You can project high definition (HD) or standard definition (SD) video, depending on the processing power of your PC. The content protection on most DVD or Blu-ray Disc movies might restrict watching the movie on TV when the disc is playing on a PC. The TV shows PC media files with a small delay. Wi-Fi MediaConnect is only available for PC.
5.6 SD card Memory size To download rented videos from Net TV, you need to insert an SD memory card in the TV SD card slot. Once formatted, leave the card permanently in the slot. SD memory size We recommend an SDHC (High Capacity) Class 2 card with a minimum of 4GB memory. For HD movies, a minumum of 8GB memory. Read more about renting videos in Help > Use your TV > Net TV > Video stores. Insert the card Make sure to unlock the SD memory card before you insert it.
5.7 Common Interface CAM CAM Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM ). Digital TV service operators provide the CAM when you subscribe to their services. Contact a digital TV service operator for more information and to see terms & conditions. Insert a CAM Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and the TV. Look for the common interface slot on the back of the TV.
5.8 3D 3D This TV is prepared for the 3D Full HD accessory PTA02 (sold separately only for 40-46PFL8505/8605 and 52PFL8605). PTA02 Installation 1 Switch off the TV. 2 Connect the 3D transmitter to the 3D connection 3D Out on the back of the TV. 3 Install the 3D transmitter on the top or at the bottom of the TV. Make sure to point the transmitter directly to where you sit to watch TV. The small window in the middle of the glasses receives the 3D signals from the transmitter.
6 Troubleshooting 6.1 Contact information If the advice and suggestions in Troubleshooting do not help resolve the problem, try switching the TV off and back on again. Warning If your TV breaks down, NEVER try to repair the TV yourself. Consumer Care If the TV problem is not solved you can call the Philips Consumer Care hotline in your country. Look up the TV model and serial number before you call. Find the telephone number on the documentation that came with the TV. Or consult our website www.philips.
6.2 TV and remote control The TV does not switch on • Switch the TV off and on again with the switch on the bottom of the TV. • Check the power cable connection. • Try using the keys on the TV to switch on. The TV does not switch on from standby • Check that the batteries of the remote control are not empty or weak. Check their + / - orientation. • Try using the keys on the TV to switch on. The TV does not respond to the remote control • Check that the batteries of the remote control are not empty or weak.
6.3 TV channels Some TV channels are gone • Check if the correct list is selected in the Channel list. With the Channel list on screen, press o (Options) and select the list you need with Select list. • A channel could be hidden in the Channel list. Read more about Channel list in Help > Use your TV > Menus > Browse. No digital channel found during installation • Check if the TV supports DVB-T or DVB-C in your country. Check the 'Digital TV Country Compatibility' sticker on the back of the TV.
6.4 Picture and sound No picture • Check if the antenna is connected properly. • Check if the correct device is selected and connected properly. • Check the contrast or brightness setting in h > Setup > TV settings > Contrast or Brightness. The picture is poor • Bad weather can influence the picture quality. • Check if the antenna is connected properly. • Non-earthed audio devices, neon lights, high buildings or mountains can influence the picture quality.
6.5 Devices HDMI connections • The HDMI -HDCP procedure might take a few seconds before the picture from a device appears. • If the TV does not recognise the device and there is no picture, try switching from one device to another and back again to restart the HDCP procedure. Or switch the device off and back on again. • If sound interruptions occur persistently, see the user manual of the device to check the output settings. If that does not help, connect an additional audio cable.
6.6 Multimedia The files on my USB device are not shown • Set your device (camera) to ‘Mass Storage Class’ compliant. • The USB device may need specific driver software. Unfortunately, this software cannot be downloaded to your TV. • Not all audio and picture files are supported. See the list in Help > Specifications > Multimedia. Files from a USB device do not play back smoothly • The transfer performance of the USB device limits the transfer rate.
6.7 Network Net TV does not work • If the connection to the router is OK, check the router connection to the Internet. Browse PC or Net TV work slow • You need a high-speed Internet connection for your router.
7 Specifications 7.1 Software Software version To view the current TV software version, press h > Setup > Software settings and press OK. Select Current software info and read Version:. Open source software This television contains open source software.
7.2 Environmental Energy saving Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Light sensor To save energy, the built-in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. Energy saving The Energy saving Smart picture setting, combines several TV settings that result in saving energy.
7.3 Power and reception Power Product specifications are subject to change without notice. For more specification details of this product see www.philips.com/support. Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C • Standby power consumtion : < 0.15W • Power saving features : Light sensor, Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu.
7.
7.
7.6 Multimedia Connections • USB • Ethernet LAN RJ -45 Supported USB / memory device formats • FAT 16, FAT 32, NTFS Playback formats • MP3, AAC • WMA v2 up to v9.2 • Still pictures : JPEG • MPEG 1, MPEG 2, MPEG 4 • H.264 (MPEG-4 AVC) • WMV9 • MPEG program and transport stream • AVI, MP4, MKV, ASF Supported media server software • Windows Media Player 11 (for Microsoft Windows XP, Vista or Windows 7) • Google (for Windows XP) • Twonky Media — PacketVideo 4.4.9 (for PC and Intel MacOX)(5.0.
7.7 Connectivity TV Rear • EXT1 Scart : Audio L/R, CVBS in, RGB • EXT2 Scart : Audio L/R, CVBS in, RGB • EXT3 : Y Pb Pr, Audio L/R • VGA (D-sub 15), Audio In (stereo mini-jack 3.5mm) • HDMI 1 - ARC in (HDMI v1.4) • HDMI 2 in (HDMI v1.3) • HDMI 3 in (HDMI v1.3) • Audio In (DVI to HDMI)(stereo mini-jack 3.5mm) • • • • Audio Out L/R — display synchronised (coaxial -cinch -S/PDIF) Headphones (stereo mini-jack 3.
7.8 Dimensions and weights 32PFL8605 Width 779 mm Height 496 mm Depth 44 mm Weight ±13 kg . . . with TV stand Height 532 mm Depth 228 mm Weight ±16 kg 37PFL8605 Width 900 mm Height 565 mm Depth 44 mm Weight ±16 kg . . . with TV stand Height 601 mm Depth 248 mm Weight ±19 kg 40PFL8505/8605 Width 965 mm Height 600 mm Depth 50 mm Weight ±18 kg . . . with TV stand Height 636 mm Depth 248 mm Weight ±20 kg 46PFL8505/8605 Width 1102 mm Height 675 mm Depth 51 mm Weight ±25 kg . . .
Index 2 2-in-1 stand M Media server software 47, 82 Music with photos 40 N Net TV 34 Net TV lock 10 A Add your devices 23 Adjust menu 25 Ambilight 32 Ambilight colour 32 Audio Out delay 49 Auto subtitle shift 49 O On during mute 43 On-screen keyboard 25 Online video store 36 Open source software 77 Options menu 25 B Balance 45 Black bars 29 Browse menu 23 P Parental rating 42 Perfect Pixel HD Engine 45 Picture delay 61 Picture settings 45 Picture shift 26 Pixel Plus link 49 Play videos 40 Power consum
K"#&(%&+,#<"'-(&,"# !"#$%&'%(+ 0DJ\DURUV]iJ+ HU+LHHIL+ILR++P2#.;/#/0+6Y5Z0Q )$*#'+,-,)$*#'./$+ HLHH+LH+IRH++P.'(&,0+1+.'(&),&Q :$5$"*(%5+ HLHH+HGO+HHMU++P.'(&,0Q )"(0'*+ HLHH+MHI+HGHO 1RUJH+ GGMH+LIII++P*"9(*0(-&(*/Q + ?("+D()*"++PIIQ+GIGI+HGHO gVWHUUHLFK+ HLHH+ILH+HIU++P9"0&/#*"0Q ǎȇǸǭǽǵȌ+ SONRG+TLR+RR+RU 3ROVND SRãĀF]HQLH ORNDOQH 3RUWXJDO+ LHH+MLH+RHO++P.'Z&,0Q ćHVNi UHSXEOLND+ LHH+ITGLTH++P7/V:*(&#W+6"5"'Q 5RPüQl+ HLHH+LRTRIH++P.
