Register your product and get support at 4900 series www.philips.
Contents 1 TV Tour 10.2 Pause TV 3 11 Sources 1.1 Ultra HD TV 3 1.2 Pause TV and recordings 1.3 EasyLink 3 2 Setting up 3 3 Connect devices 12 Timers and clock 4 12.1 Sleep timer 38 12.2 Clock 38 12.3 Switch off timer 14 Settings 15 15 18 18.1 Safety 58 18.2 Screen care 57 58 59 19.1 Terms of use 60 19.2 Copyrights and licenses Index 33 9.1 What you need 33 9.2 Using the TV guide 33 10 Recording and pause TV 55 19 Terms of use, copyrights and licenses 60 8.
1 TV Tour 1.1 Ultra HD TV This TV has an Ultra HD display. Its resolution is four times as much as normal HD displays. Ultra HD means 8 million pixels for the most refined and lifelike picture on TV. You can watch native Ultra HD videos through an HDMI connection. Ultra HD offers TV viewing that is crisp and sharp even on a big screen. 1.2 Pause TV and recordings If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel.
2 accident or injury. Setting up 2.3 2.1 Tips on placement Read safety - Position the TV where light does not shine directly on the screen. - Position the TV up to 15 cm away from the wall. - The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen. Read the safety instructions first before you use the TV. In Help, go to Safety and care > Safety. 2.
2.6 Satellite dish - For PUK models Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
3 Connect devices 3.1 About connections Connectivity guide Copy protection Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management).
EasyLink On or Off The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently. To switch off EasyLink completely . . . 1. Press and select Setup and press OK. 2. Select TV settings > General settings > EasyLink. 3. Select EasyLink. 4. Select Off and press OK. 5. Press , repeatedly if necessary, to close the menu. EasyLink setup The TV comes with EasyLink switched on.
3.2 Y Pb Pr - Audio L R Common interface - CAM Y Pb Pr - Component Video is a high quality connection. CI+ The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound. This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV broadcasters in your region.
Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV. 3.3 Set-top box - STB Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV. To switch off the Switch off timer, press and select Setup and press OK. Select TV settings > General settings > Switch off timer and set the slider bar to Off. 3.
1. Press and select Setup and press OK. 2. Select TV settings > Sound > Advanced > Audio out offset. 3. Use the slider bar to set the sound offset and press OK. 4. Press , repeatedly if necessary, to close the menu. Audio Out format Audio to video synchronisation (sync) If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel.
No sound 3.8 If you cannot hear the sound from the TV on your Home Theatre System, check the following . . . Game console - Check if you connected the HDMI cable to a HDMI 1 connection on the Home Theatre System. HDMI For best quality, connect the game console with an High speed HDMI cable to the TV - Check if the HDMI ARC setting on the TV is switched On. Go to > Setup > TV settings > Sound > Advanced > HDMI 1 -ARC. 3.
corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. 3.9 USB Hard Drive What you need If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar). Formatting To pause Before you can pause or record a broadcast, you must connect and format a USB Hard Drive.
3.11 Camcorder HDMI For best quality, use an HDMI cable to connect the camcorder to the TV. Best Setting Ideal monitor setting If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically. If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting. CVBS - Audio L R To set the TV to the ideal setting manually . . .
key. 4 Switch on 4.1 On, Standby or Off Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. 4.3 Sleep timer To put the TV in Standby when the indicator light is off, press the small joystick key on the back of the TV. The indicator will light up. With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . . 1. Press and select Setup and press OK. 2.
5 connected devices. Remote control 2. Colour keys The buttons function follow the on-screen instructions. 5.1 3. INFO To open or close programme infomation. Key overview 4. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. Top 5. HOME To open or close the home menu. 6. EXIT To switch back to watching TV. 7. OPTIONS To open or close the Options menu. 8. OK key To confirm a selection or setting. 1.
5.2 IR sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. 5.3 Batteries 1. Slide the battery door in the direction shown by the arrow. 2. Replace the old batteries with 2 type AAA-LR03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3. Reposition the battery door. 4. Slide it back until it clicks.
6 Filter a channel list TV channels 6.1 You can filter a list with all channels. You can set the channel list to show only TV channels or only Radio stations. Channel Lists To set a filter on a list with all channels… 1. While watching a TV channel, press LIST to open the channel list. 2. Press OPTIONS to open Option menu. 3. Select List, then you can select All, Favourites, Radio, and New channels. About channel lists After a channel installation, all channels appear on the channel list.
watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programmes from connected devices. Channel options Open options To lock a channel . . . While watching a channel, you can set some options. 1. While watching a TV channel, press LIST to open the Channel list. 2. In any list, select the channel you want to lock. 3. Press OPTIONS and select Lock channel. In a channel list, a locked channel is marked with a lock .
Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired. Select a subtitle language If none of the preferred subtitle languages are available, you can select another subtitle language if available. If no subtitle languages are available, you cannot select this option.
To remove a channel from the favourites list, select the channel with , then press (yellow) again to unmark as favourite. Favourite Text pages column. 1. In Text, select the star in the top left corner of the screen to show the column of favourite pages. 2. Press (down) or (up) to select a page number and press OK to open the page. Reorder channels You can clear the list with the option Clear favourite pages. You can only reorder channels in the Favourites list. 1.
- Language To switch the group of characters that Text uses to display correctly. You can check the current version of the TV software with Current software info in > Setup > Software settings. - Text 2.5 To activate the Text 2.5 for more colours and better graphics. Copy channel list To copy a channel list . . . Text setup 1. Switch on the TV which has its channels installed. Plug in a USB memory device. 2. Press and select Setup and press OK. 3.
If the country is not correct, you need to start a reinstallation. To start the reinstallation, press and select Setup and press OK. Select TV settings > General settings > Re-install TV > OK. Select the correct country and skip the Search for channels. Finish the installation. When done, continue with step 2. 2. Plug in the USB memory device that holds the channel list of the other TV. 3. To start the channel list upload, press and select Setup and press OK. 4.
7 them. Channel installation - Antenna, Cable 7.2 7.1 Reinstall All Channels Reinstall channels Update channels You can reinstall all channels and leave all other TV settings untouched. Automatic update If a PIN code is set, you will need to enter this code before you can reinstall channels. If you receive digital channels, you can set the TV to automatically update the list with new channels. Alternatively, you can start a channel update yourself.
Symbol rate mode Free / Scrambled If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic. If you have a subscription and a CAM - Conditional Access Module for pay TV services, select Free + scrambled. If you did not subscribe to pay TV channels or services, you can select Free channels only. If you received a specific symbol rate value, select Manual.
To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. - Store You can store the channel on the current channel number or as a new channel number. Select Store current channel or Store as new channel. You can redo these steps until you found all available analogue TV channels.
8 Channel list options Channel installation - Satellite (For PxK models) To view the channel list options on the current channel . . . 1. With the All channels list on screen, select a channel and press OPTIONS . 2. Select the option you want and press OK. Available options for satellite channels . . . 8.1 - Satellite Filter the channel list to only show the channels of a specific satellite or show the channels of all satellites. Watching satellite channels To watch satellite channels . . .
immediately. Press OK. To avoid a lot of reordering later, select the channels in the order you want them in the list. 4. To add a channel to the Favourites list, select the channel and press OK. You can then select another channel to add as a favourite. 5. To finish, press . You will need to enter the Child lock code. Use an age rating To prevent children from watching a programme not suitable for their age, you can use an age rating. Some digital broadcasters have age rated their programmes.
select the package you want. 6. To install the channels of the satellites found, select Install and press OK. The TV shows the number of channels and radio stations found. 7. To store the satellite settings, all satellite channels and satellite radio stations, select Finish and press OK. 8.5 Satellite installation About installing satellites This TV has a built-in satellite DVB-S/DVB-S2 receiver. Connect the cable from your satellite dish directly to the TV.
ask you to select a Quick or Full installation. Select Quick to install the channels of the package only or select Full to install the package and all other available channels too. We recommend a Quick installation for subscription packages. If you have additional satellites that are not part of your subscription package, we recommend a Full installation. All installed channels are put in the channels list All.
Add a satellite Manual Installation You can add an additional satellite to your current satellite installation. The installed satellites and their channels stay untouched. However, some satellite operators do not allow adding a satellite. Manual Installation is intended for expert users. You can use Manual Installation to quickly add new channels from a satellite transponder. You need to know the frequency and polarization of the transponder. The TV will install all channels of that transponder.
To set Speakers / Headphones . . . 1. Press and select Setup and press OK. 2. Select Satellite settings > Languages > Audio description > Speakers / Headphones and press OK. 3. Select Speakers, Headphones or Speakers + headphones and press OK. 4. Press , repeatedly if necessary, to close the menu. - All settings, satellites and channels are only stored at the end of the installation when you finish.
9 Change day TV guide The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days). 9.1 If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press to go back to the previous day. Alternatively, you can press OPTIONS and select Change day. Select Previous day, Today or Next day and press OK, to select the day of the schedule.
3. At the top of the screen, select Scheduled and press OK. 4. In the list of scheduled recordings and reminders, select the tab Reminders and press OK to view the reminders only. 5. Press the colour key Remove to remove the selected reminder. Press the colour key Record to record the selected programme. Set a Recording You can set a recording in the TV Guide*. In the TV Guide, a programme set to be recorded is marked with .
1. Press TV GUIDE. 2. On the TV Guide, select the channel and programme you wish to record. Press (right) or (left) to scroll through the programmes of a channel. Use the colour key Day to select the day you need. 3. With the programme highlighted, press the colour key Record . The programme is scheduled for recording. A warning will show automatically when overlapping recordings are scheduled.
key Adjust Time . 6. Select the start or end time and change the time with the (up) or (down) keys. Select Apply and press OK. With the USB Hard Drive connected and formatted, the TV continuously stores the TV broadcast you are watching. When you switch to another channel, the broadcast of the former channel is cleared. Also when you switch the TV to standby the broadcast is cleared. Manual Recording You cannot use Pause TV when you are recording.
11 Sources 11.1 Switch to a device In the list of connections - the Source menu - you can find the devices connected to the TV. From this Source menu, you can switch to a device. Sources menu To open the Sources menu, press SOURCES . To switch to a connected device, select the device with the arrows (left) or (right) and press OK. To close the Source menu without switching to a device, press SOURCES again. 11.
3. Press , repeatedly if necessary, to close the menu. 12 Timers and clock 12.1 Sleep timer With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . . 1. Press and select Setup and press OK. 2. Select TV settings > General settings > Sleep timer. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off.
To show the progress bar when a video is playing (playhead position, duration, title, date, etc.), press INFO. Press again to hide the info. 13 Videos, Photos and Music Video options 13.1 From a USB connection During the video playback, press OPTIONS to… - Subtitles Display the subtitles if available. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. - Audio language Play the audio language if available.
Info 13.4 To view info on a photo (size, creation date, file path, etc.), select a photo and press INFO. Press again to hide the info. Play your music Play music How you open the list of your media files on TV depends on the type of device where the files are stored. See the chapters above. Slideshow with music You can watch a slideshow of your photos and listen to your music at the same time. You must start the usic before you start the photo slideshow.
1. Press and select Setup and press OK. 2. Select TV settings > General settings > Location and press OK. 3. Select Home and press OK. 4. Press , repeatedly if necessary, to close the menu. 14 Settings 14.1 Picture Picture style Picture settings Select a style Colour For easy picture adjustment, you can select a preset Picture Style. With Colour, you can adjust the colour saturation of the picture. 1. Press and select Setup and press OK. 2.
Game or computer Custom colour temperature When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. With Custom colour temperature, you can set a colour temperature yourself. To set a custom colour temperature, first select Custom in the Colour temperature menu.
1. Press and select Setup and press OK. 2. Select TV settings > Picture > Advanced > Sharpness > Ultra resolution. 3. Select On or Off. 4. Press , repeatedly if necessary, to close the menu. Brightness With Brightness, you can set the level of brightness of the picture signal. Brightness is a setting intended for expert users. We recommend non-expert users to adjust the brightness of the picture with the Contrast setting. To adjust the level… 1. Press and select Setup and press OK. 2.
2. Select a format from the list and press OK. Restore a style With Screen edges, you can slightly enlarge the picture to hide distorted edges. The selected style will store the changes you made. We recommend to adjust the sound settings for the style Personal only. The Sound Style - Personal can save its settings for each individual connected device in Sources menu. To adjust the edges ... To restore the style to its original setting… 1. Press and select Setup and press OK. 2.
menu. Headphones volume With Headphones volume, you can set the volume of a connected headphones separately. Clear sound To adjust the volume . . . With Clear sound, you improve the sound for speech. Ideal for news programmes. You can switch the speech improvement on or off. 1. Press and select Setup and press OK. 2. Select TV settings > Sound > Headphones volume. 3. Press (up) or (down) to adjust the volume. 4. Press , repeatedly if necessary, to close the menu. To switch on or off ... 1.
the volume difference is small, select Less. 5. Press , repeatedly if necessary, to close the menu. Menu language To change the language of the TV menus and messages… 1. Press and select Setup and press OK. 2. Select TV settings > General settings > Menu language. 3. Select on the language you need. 4. Press , repeatedly if necessary, to close the menu. Audio out delay With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised.
4. Press menu. , repeatedly if necessary, to close the TV placement As part of the first installation, this setting is set to either On a TV stand or On the Wall. If you have changed the placement of the TV since then, adjust this setting accordingly for best sound reproduction. Sleep timer With the sleep timer, you can set the TV to switch to standby automatically after a preset time. 1. Press and select Setup and press OK. 2. Select TV settings > General settings > TV Placement and press OK. 3.
15 European energy label Specifications The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV 15.
15.
• 800 x 600p - 60 Hz • 1024 x 768p - 60 Hz • 1280 x 768p - 60 Hz • 1360 x 765p - 60 Hz • 1360 x 768p - 60 Hz • 1280 x 1024p - 60 Hz • 1920 x 1080p - 60 Hz • 3840 x 2160p - 24 Hz, 25 Hz, 30 Hz (YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0) • 3840 x 2160p - 50 Hz, 60 Hz (YCbCr 4:2:0) Width 1239.2 mm - Height 764.1 mm - Depth 210.8 mm - Weight ± 15.6 kg 15.7 Connectivity For PUK4900 TV Rear - HDMI 1 in - ARC - HDCP 2.2 - HDMI 2 in - HDCP 2.2 - SERV. U: Service port - AUDIO IN (DVI): Stereo 3.
15.9 Multimedia Note: Multimedia file names must not exceed 128 characters. Supported multimedia connections - USB (FAT / FAT 32 / NTFS): only connect USB devices that consume 500 mA of power or less. Supported image files - JPEG: *.jpg, *.jpeg - PNG: *.png.jpg Supported audio files - MPEG1: *.mp3 Supported video files - *.avi, *.mp4, *.mov, *.mkv, *.mpg, *.
16 16.3 Software Open source software This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences. 16.1 Software update It might be necessary to update the TV software. You need a computer and a USB memory device to upload the software on the TV.
3-0 layers, not only on top of the Linux Framebuffer Device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux. libpng libpng is the official PNG reference library. It supports almost all PNG features. Source: www.libpng.org Source: http://directfb.org/ OpenSSL (1.0.0.d) libTomMath (0.42.
libexpat Expat is an XML parser library written in C. It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). Source: http://expat.sourceforge.net/ libdrm libdrm provides core library routines for the X Window System to directly interface with video hardware using the Linux kernel's Direct Rendering Manager (DRM). Source: http://dri.freedesktop.org/libdrm/ FFMpeg (0.
17 Philips startup screen Troubleshooting and support When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or the TV. 17.1 Troubleshooting The standby light keeps on blinking Disconnect the power cable from the power outlet.
EasyLink does not work Make sure that Location is set to Home. - Make sure that your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible. Picture does not fit the screen Change to a different picture format. Press . No volume icon shown Picture format keeps changing with different - When a HDMI-CEC audio device is connected this behaviour is normal. channels Select a non 'Auto' picture format.
17.4 Online help To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/support . On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our colaborators and ask your question directly or send a question by email.
18 Risk of injury or damage to the TV Safety and care - Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. 18.1 - If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. Safety Important - When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time.
property of the display (within common industry standards) and is not a malfunction. CE compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/EC (EMC) and 2011/65/EU (ROHS). Compliance with EMF TP Vision Europe B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
Dolby Dolby® Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. MHEG software The copyright in MHEG software (the Software) comprised in this television (this product) and included to enable you to use interactive television features is owned by S&T CLIENT SYSTEMS LIMITED (the Owner). You are permitted to use the Software only in conjunction with this product.
Index 62
Powered by TCPDF (www.tcpdf.
