Register your product and get support at www.philips.
Contents 10.1 Sources list 33 10.2 From standby 33 10.3 EasyLink 33 1 My new TV 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Smart TV 4 App gallery 4 Rental videos 4 Social networks 4 Skype 4 Pause TV and recordings 4 Gaming 5 EasyLink 5 11 Timers and clock 34 11.1 Sleeptimer 34 11.2 Clock 34 11.3 Switch off timer 34 12 Games 35 12.1 Play a game 35 2 Setting up 6 2.1 2.2 2.3 2.4 2.
20 Software 64 20.1 20.2 20.3 20.4 Software update 64 Software version 64 Open source software 64 Open source license 64 21 Troubleshooting and support 70 21.1 21.2 21.3 21.4 21.5 Troubleshooting 70 Register 71 Help 71 Online help 71 Consumer Care / Repair 72 22 Safety and care 73 22.1 Safety 73 22.2 Screen care 74 23 Terms of use, copyrights and licenses 75 23.1 Terms of use 75 23.
Start Smart TV and add the video store App to the Smart TV start page. 1 My new TV Open the video store App, create your personal account, select the movie and press play. No fuss with downloading, you can watch the movie immediately*. 1.1 Smart TV In Help, press Keywords and look up Rental videos for more information. Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
In Help, press Keywords and look up EasyLink for more information. 1.6 Pause TV and recordings If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later. With a USB Hard Drive connected, you can also record digital broadcasts.
2 2.3 Setting up Tips on placement • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect.* • Position the TV up to 15 cm away from the wall. • The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen. 2.1 Read safety Read the safety instructions first before you use the TV. In Help, go to Safety and care > Safety. 2.
2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals.
• Scan Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity. • WPS If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
Network problems Connect the router Wireless network not found or distorted To connect and setup the router follow steps 1 to 5. • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation.
For more information on Wi-Fi Miracast, press Keywords and look up Wi-Fi Miracast™. • Reset Wi-Fi direct group Clear the list of connected and blocked devices that are used with Miracast. • Wi-Fi smart screen For more information on Wi-Fi smart screen, press Keywords and look up Wi-Fi smart screen. • TV network name If you have more than one TV in your network, you can rename the TVs here. • Netflix Settings Adjust Netflix settings.
4 Connections If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. For more information on using EasyLink, press Keywords and look up EasyLink CEC. 4.1 Tips on connections Connectivity guide DVI to HDMI Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
the audio to video synchronisation. For more information, press Keywords and look up Audio to video sync. 4.2 EasyLink HDMI CEC EasyLink With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection. CVBS - Audio L R CVBS - Composite Video is a high quality connection.
Press OPTIONS and select Controls in the menu bar. On the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu. 4.3 Set-top box - STB Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV. Note: Only devices that support EasyLink remote control function will respond to the TV remote control. EasyLink settings The TV comes with all EasyLink settings switched on.
All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection. the HTS, you need to switch off Audio out delay on the TV. To switch off the Audio Out delay . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Advanced > Audio out delay. 3 - Select Off and press OK. 4 - Press , repeatedly if necessary, to close the menu.
HDMI ARC sound signals. Problems with HTS sound Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the Audio out format of the TV to Stereo. Press and select Setup > TV settings > Sound > Advanced > Audio out format.
CVBS - Audio L R Installation Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV. Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Formatting removes all files from the USB Hard Drive.
Install the keyboard You can use the scroll wheel to scroll pages up and down. To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. If you select a Cyrillic or Greek keyboard lay-out first, you can select a secondary Latin keyboard lay-out.
4.13 Computer Connect You can connect your computer to the TV and use the TV as a PC monitor. With HDMI If the contents list does not appear automatically, press SOURCES, select USB and press OK. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. Use an HDMI cable to connect the computer to the TV. For more information on viewing photos, press Keywords and look up Your photos, videos and music. 4.
a movie) and press OK. 4 - Press , repeatedly if necessary, to close the menu. Remember to set the Game or computer setting back to Computer when you stop playing the game. 4.14 Headphones You can connect a set of headphones to the connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. To adjust the volume . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Headphones volume and press OK.
5 Switch on 5.1 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press on the remote control to switch the TV on. Switch to standby To switch the TV to standby, press on the remote control. Switch Off To switch the TV Off, press the Joystick at the bottom of the TV.
6 Remote control 6.1 Key overview Top 1 - SMART TV To open the Smart TV start page. 2 - Colour keys Follow on screen instructions. Blue key , opens Help. 3 - INFO To open or close programme info. 4 - BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous Smart TV page. 1 - Standby / On To switch the TV On or back to Standby. 2 - Playback and record keys • Play , to playback.
4 - LIST To open or close the channel list. 6.4 5 - Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text or start the next or previous chapter on a disc. Your remote control is treated with a scratch-resistant coating. Cleaning To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control. 6 - Mute To mute the sound or to restore it.
7 Channel list TV channels Favourite channels 7.1 You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels. Watching TV channels Switch channels Create your favourite channel list 1 - While watching a TV channel, press LIST to open the channel list. 2 - Select All to view all channels. 3 - Select the channel, and press to mark as favourite.
To set an age rating . . . Rename channels 1 - Press and select Setup and press OK. 2 - Select Channel settings > Child lock > Parental rating and press OK. 3 - Enter a 4-digit Child lock code and confirm. Now you can set an age rating. 4 - Set the age and press OK. 5 - Press , repeatedly if necessary, to close the menu. You can rename channels in the channel list. 1 - Select the channel you want to rename in one of the channel lists. 2 - Select the channel to rename. 3 - Press .
For more information, press Keywords and look up Universal access. • Basic - Fill screen - Fit to screen Video selection Digital TV channels can offer multi video signals (multi-feed broadcast), different camera viewpoints or angles of the same event or different programmes on one TV channel. The TV shows a message if any such TV channels are available. • Advanced - Last setting - Shift - Zoom - Stretch - Native - Undo Subtitles Switch Subtitles on or Subtitles off with this options.
To switch the group of characters that Text uses to display correctly. • Text 2.5 To activate the Text 2.5 for more colours and better graphics. Subtitles and languages Subtitles Switch subtitles on To open the Subtitle menu, press SUBTITLE. You can set subtitles to On, Off or Automatic. To show subtitles when the broadcasted programme is not in your language — the language you set for the TV, select Automatic. Also, this setting will show subtitles when you mute the sound with .
the key to navigate the iTV pages. You can use the (Play), (Pause) and (Stop) keys to watch videos within iTV pages. To set the primary and secondary audio language . . . 1 - Press and select Setup and press OK. 2 - Select Channel settings and select Languages > Primary audio language or Secondary audio language and press OK. 3 - Select a language and press OK. 4 - Press , repeatedly if necessary, to close the menu. Close iTV pages Most iTV pages inform you which key to use to close.
Start an update Channel list copy To start an update yourself . . . Introduction 1 - Press and select Setup and press OK. 2 - Select Search for channels and press OK. 3 - Select Update channels and follow the instructions on screen. The update may take a few minutes. Channel list copy is intended for dealers and expert users. With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range.
successfully. Unplug the USB memory device. DVB-T + DVB-C To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, press and select Setup and press OK. Select Search for channels > Re-install channels and press OK. Press and later Cancel to leave the Search for channels.) If the country is correct continue with step 2. If the country is not correct, you need to start a reinstallation. To start the reinstallation, press and select Setup and press OK.
To check the reception quality of a digital channel . . . 1 - Tune to the channel. 2 - Press and select Setup and press OK. 3 - Select Channel settings > Channel installation > Digital : reception test and press OK. Network frequency mode If you intend to use the fast Quick scan method in Frequency scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country.
8 Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu 1 - To open the Home menu, press . 2 - Select an activity using the arrow keys and press OK to start the activity.
9 Set a reminder TV guide You can set reminders that alert you of the start of a programme with a message on screen. 9.1 • To set a reminder, select the programme in the schedule and press for Set reminder. The programme is marked with a clock. • To cancel the reminder, press the for Clear reminder. • To view a list of all reminders you have set, press OPTIONS, and select All reminders. What you need With the TV guide you can view a list of the current and scheduled TV programmes of your channels.
10 press OPTIONS. select Scan connections and press OK. Sources 10.2 From standby 10.1 Sources list With the TV in standby, you can switch on a connected device with your TV remote control. In the list of connections - the Source menu - you can find the devices connected to the TV. From this Source menu, you can switch to a device. Play To switch on both disc player and TV from standby and start playing the disc or programme immediately, press (play) on the TV remote control.
clock mode and select Automatic or Country dependent. 3 - Press to go back to the Clock menu and select Time zone. 4 - Select your time zone, then press OK. 11 Timers and clock 11.1 Sleeptimer 11.3 Switch off timer With the sleep timer, you can set the TV to switch to standby automatically after a preset time.
12 Games 12.1 Play a game With a game console connected to the TV, you can play games on TV. For more information on connecting a game console, press Keywords and look up Game console, connect. Start a game 1 - Switch on the game console. 2 - Press SOURCES, select the game console and press OK. 3 - Start the game. Ideal game setting For some games, where speed and precision is needed, set the TV to the ideal Game setting before you start playing.
13 Sorting Your photos, videos and music To browse your photos by date, month, year or alphabetically by name, press Sort. To browse your music by album, artist, genre or alphabetically by name, press Sort. Videos are sorted alphabetically. 13.1 From a USB connection or network computer View photos To view photos, select Photos in the menu bar, select a photo thumbnail and press OK.
several times to speed up - 2x, 4x, 8x, 16x, 32x. To stop the music playback, press (Stop). 13.2 Wi-Fi Miracast If you press LIST or , the music keeps on playing. About Wi-Fi Miracast Info To view song info (title, artist, duration, etc.), select the song and press INFO. Press again to hide the info. Your TV is a Wi-Fi Certified Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly.
Alternatively, you might be asked by the TV to enter a PIN code on the device. If you connect, the TV will show the screen of the device. 5 - On the device, select the videos, photos or files you want to watch on TV. Screen delay The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices/computers with less processing power. * Miracast is supported by WiFi 3.5 onwards.
14 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. For more information, press Keywords and look up USB Hard Drive. Pause or resume a broadcast To pause a broadcast, press (Pause). A progress bar appears briefly on screen. To call up the progress bar, press (Pause) again. To resume watching, press (Play).
the TV guide comes from the Internet, you can select the date at the top of the page and press OK. 15 Recording 2 - With the programme highlighted, press Record. The TV adds some time buffer at the end of the programme. You can add some extra buffer if needed. 15.1 What you need To record a TV programme you need . . . 3 - Select Schedule and press OK. The programme is scheduled for recording. A warning will appear / will be shown automatically when overlapping recordings are scheduled.
15.3 Watch a recording To watch a recording . . . 1 - Press , select Recordings and press OK. 2 - - In the list, select the recording and press (Play) to start the playback. You can use the (Forward), (Rewind), (Pause) or (Stop) keys on the remote control. Expired recording Broadcasters can limit the number of days a recording can be viewed. A recording in the list can show the number of days before it expires.
If the TV camera is not connected, Skype will not start. 16 Skype Sign in 16.1 Sign in to Skype with your Skype Name and password. If you don't have a Skype Name yet, you have to create a new Skype account. About Skype With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV. To sign in to Skype… 1 - Press to open the Home menu.
password cannot contain a space. 16.4 If you don't have a Skype Name and Password yet, you can create a new account on the sign in page on TV. Skype menu 1 - On the sign-in page, select New account and press OK. 2 - Create your new account. • Full name Enter your full name. • Skype name Enter a name as your Skype name. Your Skype Name will be shown in the list of contacts of other Skype users. A Skype Name must begin with a letter, upper or lowercase.
View or change your email address, check the amount of credit you have or view the subscription information, or write a message that reflects your mood. Add a phone number In Contacts, the list of your contacts, you can add a phone number as a contact. You can call a phone with a Skype voice call. You need Skype Credits to make a phone call. • Profile picture If you did not upload a profile picture with your computer yet, you can select one of the available avatars as Profile picture here.
1 - On the Contacts page, select the contact you want to call. 2 - Select Call and press OK. If your contact is on Skype and answers the call, you can talk to your contact. 3 - To end the call, select End call and press OK. Remove or rename You can Remove or Rename contacts. To remove a contact… A contact can add you to a voice call with more than one participant. You cannot add an extra participant yourself. 1 - On the Contacts page, select the contact you want to remove.
Outgoing calls and press OK. 16.8 To view new contact requests, select Contact requests and press OK. Skype credit To view and listen to your voicemails, select Voicemails and press OK. On Skype, you can buy Skype Credit or take a Skype subscription. With Skype Credit or a Skype subscription available, you can call landline phones and mobile phones with your TV. For how long your Skype events are kept in this history list depends on the amount of contacts you have and how intensively you use Skype.
password for confirmation. If you allow a contact to send you a voicemail when you can't answer the call within 15 seconds and you are in another call, check the box of I am already in a call. If you allow a voicemail, when you declined a call, check the box of I decline an incoming call. Video To set your preferences for voicemail… You can set Skype to restrict the use of video in Skype calls. 1 - Sign in to Skype with your account. 2 - In the Skype menu, select Settings and press OK.
4 - Press Done to store the camera viewpoint and to go back to your Skype call. 16.10 Sign out When you sign out of Skype, you are signing out your Skype account. Your Online status will change to Offline. Your contacts will not be able to call you. To sign out… 1 - Press Back from anywhere within Skype to return to the Skype menu. 2 - Select Sign out in the Skype menu and press OK. The TV will ask you to quit Skype or to use Skype with another Skype account. 16.
1 - Switch on Smart TV parental control by selecting Enable and then press OK. 2 - Enter an unlock PIN code of your choice. 3 - Confirm your PIN code. Adult 18+ rated apps are now locked. To open a locked app, select the app and press OK. The TV will ask you to enter your 4-digit code. 17 Smart TV 17.1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. 17.
On an App page, press OPTIONS and select Security info. If a lock is shown next to the loading animation on the bottom of the screen while loading a page, the transfer is secured. The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen. - Some plug-ins (e.g. to view pages or videos) are not available on your TV. - Internet pages are shown one page at a time and full screen.
With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. You can pause or restart a downloaded rental movie. Consult the video store regarding the rental duration of rental movies. 3 - Press or to change the TV channel in the small screen.
Automatic channel update, do a digital reception test or install analogue channels manually. 18 Settings Languages 18.1 Press Keywords and look up Audio language or Subtitles. Setup menu Universal access Press Keywords and look up Universal access for visually and hearing impaired users settings. Quick picture and sound settings Channel installation With Quick picture and sound settings you can set your basic picture preferences in a few easy steps.
2 - Select TV settings > Picture > Colour. 3 - Press (right) and adjust the value with (up) or (down). 4 - Press , repeatedly if necessary, to close the menu. 18.2 Picture Picture style For easy picture adjustment, you can select a preset setting with Picture style. Contrast With Contrast, you can adjust the contrast of the picture. 1 - While watching a TV channel, press to open the menu. 2 - Select Picture style and press OK. To adjust the contrast . . .
1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Advanced > Colour > Colour temperature. 3 - Press (right) and select Normal, Warm or Cool. Select Custom if you want to set a colour temperature yourself. 4 - Press , repeatedly if necessary, to close the menu. Brightness With Brightness, you can set the level of brightness of the picture signal. Brightness is a setting intended for expert users.
OK. 3 - Select Shop and press OK. 4 - Press , repeatedly if necessary, to close the menu. Noise reduction With Noise reduction, you can filter out and reduce the level of image noise. To adjust the noise reduction . . . 18.3 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Advanced > Sharpness > Noise reduction. 3 - Press (right) and select Maximum, Medium, Minimum or Off. 4 - Press , repeatedly if necessary, to close the menu.
• If you select On, the TV speakers are always on. Treble With an audio device connected with HDMI CEC, you can use one of the EasyLink settings. With Treble, you can adjust the level of high tones in the sound. To adjust the level . . . • If you select EasyLink, the TV sends the TV sound to the audio device. The TV will switch off the TV speakers when the device is playing the sound.
You can also select the Ambilight style in the TV settings menu. Audio out levelling With Audio out leveling you can level the sound volume of the Home Theatre System with the volume of the TV when you switch over from one to another. 1 - Press and select Setup and press OK. 2 - Select TV settings > Ambilight > Ambilight style. 3 - Select one of the preset style or Off. 4 - Press , repeatedly if necessary, to close the menu. For more information, press Keywords and look up Audio out leveling.
• a Philips Hue bridge • a few Philips Hue bulbs • this TV connected to your home network To link the Hue bridge… 1 - With the TV connected to the network, it will show the available Hue bridges. If the TV did not find your hue bridge yet, you can select Scan again and press OK. If the TV found the only hue bridge you have, select Next and press OK. If you have more than one hue bridge available, press (up) or (down) to select the hue bridge you want to use and then select Next and press OK.
and press OK. To select the TV switch off . . . Ambilight+hue is ready for use. 1 - Press and select Setup and press OK. 2 - Select TV settings > Ambilight > Advanced > TV switch off. 3 - Select Fade out to off or Immediate switch off. 4 - Press , repeatedly if necessary, to close the menu. You can always change the Ambilight+hue configuration later. To change the configuration, press and select Setup > TV settings > Ambilight > Ambilight+hue.
4 - Press , repeatedly if necessary, to close the menu. Also, before you can switch on Audio description, you have to switch on Universal access. Audio description Speech With Audio description, a narrator's commentary is added to the normal audio. To switch on the commentary (if available) . . . The audio commentary can also hold subtitles for the words which are spoken. To switch on these subtitles (if available) . . . 1 - With Universal access switched on, press OPTIONS and select Universal access.
19 End of use Specifications Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. 19.1 Environmental Saving energy The Eco settings bundle the settings that help the environment. While you are watching TV channels, press , select Eco settings, then press OK. Active settings are marked with a . You can mark or unmark each setting with the OK key. Press again to close Eco settings.
19.3 19.5 Display Dimensions and weights Type 42PFT6509 • without TV stand: Width 957 mm - Height 554.5 mm - Depth 56.3 mm - Weight ±8.56 kg • Diagonal screen size : - 42PFT6509 : 107 cm / 42 inch - 50PFT6509 : 127 cm / 50 inch • with TV stand: Width 957 mm - Height 615.5 mm - Depth 213.1 mm - Weight ±9.8 kg • Display native resolution : 1920x1080p Input resolution 50PFT6509 • without TV stand: Width 1124.6 mm - Height 651.6 mm - Depth 80.2 mm Weight ±10.
• Wi-Fi 802.11b/g/n (built-in)* Supported USB file systems • FAT 16, FAT 32, NTFS Playback formats • Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS, MPEG-4, Matroska (MKV), Quicktime (MOV, M4V, M4A), Windows Media (ASF/WMV/WMA) • Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4 Part 10 AVC (H264), VC-1, WMV9 • Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.
20 Update from Internet Software If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a high-speed (broadband) Internet connection. 20.1 Software update If you receive this message, we recommend you carry out the update. Select Update. Follow the instructions on screen. Update from USB You can also look for new updates yourself. To look for an update . . . It might be necessary to update the TV software.
This is a document describing the distribution of the source code used on the Philips TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain source code for this software can be found in the user manual. animation extension to the popular PNG image-format. This piece of software is made available under the terms and conditions of the libmng license, which can be found below.
windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications. This piece of software is made available under the terms and conditions of the DirectFB license, which can be found below. Source: http://sourceforge.net/projects/jointspace/files/remote_a pplications_SDK/remote_spplications_SDK_v1.3.1/DirectFB141_ source_1.3.1.7z/download routines for read, write and erase.
Source: http://sourceforge.net/projects/linux-ntfs A library provides an encrypted filesystem in user-space. Source: http://www.arg0.net/encfs fuse (2.8.4) Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel. This piece of software is made available under the terms and conditions of the fuse license, which can be found below. Source: http://fuse.sourceforge.net/ boost (1.15.
The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. Source: http://www.gnu.org/software/grep/ text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file. Source: http://www.gnu.org/software/sed/ gzip (1.3.12) GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project.
ezxml (0.8.6) ezXML is a C library for parsing XML documents. Used inside Philips libraries. Source: http://sourceforge.net/projects/ezxml/ jquery (1.10.2) jQuery is a fast and concise JavaScript Library that simplifies HTML document traversing, event handling, animating, and Ajax interactions for rapid web development. Source: http://jquery.com/ SQLite (3.7.7.1) SQLite is a in-process library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine.
21 control or the TV. Troubleshooting and support The standby light keeps on blinking • Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care. 21.1 Change the language back to your language. Troubleshooting 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Menu language and press OK. 3 - Select the language you want and press OK.
21.2 Sound Register No sound or poor sound quality Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. • Make sure that the sound settings are correctly set.
questions (FAQs). In some countries, you can chat with one of our colaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 21.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support .
22 Risk of injury or damage to the TV Safety and care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects.
All Rights Reserved. countries. Microsoft PlayReady Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReadyprotected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content.
Index Contrast, Dynamic contrast 54 Contrast, Gamma 54 Contrast, Video contrast 54 A Active control 52 Activity style 55 Ambilight+hue 57 Ambilight, Lounge light 59 Ambilight, mode 57 Ambilight, TV placement 6 Ambilight, TV switch off 59 Ambilight, wall colour 59 Amplifier, audio system 56 Antenna connection 7 Antenna connection, tips 11 App, gallery 50 App, rental videos 50 Apps, feedback 50 Apps, lock 52 Apps, open 54 Apps, recommended 56 Apps, search 58 Audio commentary 59 Audio description 61 Audio lan
Language, original 30 Location 55 Lounge light 61 Recording, Skype calls 45 Recording, watch a 41 Recording, what you need 16 Recording, what you need 40 Red button 31 Rename channels 26 Rental videos 52 Repair 76 M Manual installation 30 Media servers, supported 64 Menu language 29 Miracast, block/unblock 38 Miracast, share a screen 37 Miracast, stop sharing 38 Miracast™ 37 Mouse, connect 17 MPEG artefact reduction 55 Multi view 51 Music, playback 36 S Safety instructions 73 Screen care 74 Screen off 65
Twitter 53 U Universal access 59 Universal access, audio effect 60 Universal access, hearing impaired 61 Universal access, mixed volume 60 Universal access, Speakers / Headphones 60 Universal access, speech 60 USB flash drive, connect 17 USB Hard Drive, disc space 18 USB Hard Drive, installation 16 USB keyboard 18 USB mouse 19 V Video selection 30 Videos, playback 37 Viewing distance 8 Visually impaired 63 W Watch TV 27 Wi-Fi 10 Wi-Fi Certified Miracast™ 39 Wired network 11 Wireless installation 16 World
Powered by TCPDF (www.tcpdf.org) Non-contractual images / Images non contractuelles / Außervertragliche Bilder Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. All registered and unregistered trademarks are property of their respective owners. 2014 © TP Vision Europe B.V. All rights reserved. www.philips.
