2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 1 1 1.1 1.2 1.3 Important 3 Safety 3 Care of the screen 3 Recycling 3 2 2.1 2.2 Your TV 4 Television overview 4 Product highlights 5 3 3.1 3.2 3.3 3.4 3.5 3.6 Getting started 5 Position the TV 5 Wall mounting - VESA 6 Remote control batteries 9 Antenna cable 9 Connect the mains 9 First time installation 9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.
664.1 eng_aurea_AP 27-09-2007 2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
1 27-09-2007 12:32 Pagina 3 Important Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions. • Stationary images Avoid stationary images as much as possible. If you can not, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time.
2664.1 eng_aurea_AP 2 27-09-2007 12:32 Pagina 4 Your TV This section gives you an overview of the controls and functions of this TV. 2.
2.2 27-09-2007 12:32 Pagina 5 Product highlights Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... Full High Definition LCD display A full HD resolution of 1920x1080p, the highest resolution of HD sources. It offers a brilliant flickerfree progressive scan picture with optimum brightness and superb colours. 3 Getting started This section helps you with the positioning and the first time installation of the TV. 3.
2664.1 eng_aurea_AP 3.2 27-09-2007 12:32 Pagina 6 Wall mounting You can wall mount the TV with the supplied wall mount bracket. 3.2.1 Unmounting the TV stand The TV stand should be unmounted from the TV to allow the TV to be wall mounted. ‡ Unscrew the 4 screws that secure the stand to the TV. 3.2.2 Mounting the wall mount bracket ) Caution Wall mounting the TV requires special skills that should only be performed by qualified personnel.
2664.1 eng_aurea_AP 27-09-2007 Pagina 7 on the 2 lower discs ‹ Connect all cables. See section 7 Connections. ENGLISH † Mount the 2 spacers at the back of the TV. 12:32 ≈Lift the TV into the wall mount bracket. º Calculate your TV’s ideal position. 715mm 79 mm 42" 1121 121m m 260,5 mm 2 30kg Ú Secure the TV in the bracket by screwing in the 2 already fitted screws . ◊Position and level the wall mount bracket and fix the bracket firmly to the wall.
2664.1 eng_aurea_AP 3.2.3 27-09-2007 12:32 Pagina 8 VESA compliant mounting ) Caution Use a VESA compliant bracket that meets safety standards according to the TV’s weight. Closely follow the instructions that come with your VESA compliant bracket to mount the TV. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or mounting that results in accident or injury. The TV is prepared for VESA compliant mounting. This bracket is not included.
3.3 27-09-2007 12:32 Pagina 9 Remote control batteries 3.5 Connect the mains cord ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. ‡ Open the battery cover on the back of the remote control. ® Insert the 3 batteries supplied (Type AAALR03-1,5V). Make sure the + and - ends of the batteries line up correctly (inside of case is marked.) Ò Close the cover.
2664.1 eng_aurea_AP 4 27-09-2007 12:32 Use your TV Learn how to operate your TV for daily use. Pagina 10 4.1 Switch on or off - Standby To switch on the TV: • Press B Power at the right side of the TV if the standby led is off. • Press B on the remote control if the standby led in on. To switch to standby: • Press B on the remote control. To switch on from standby without remote control: • Press B Power at the side of the TV to switch off first and press B Power again to switch on.
4.2 27-09-2007 12:32 Pagina 11 Watch TV 4.3 4.2.1 Switch channels ‡ To switch TV channels: • Press a number or press P+ or P- on your remote control. • Press Program/Channel - or + on the side controls of the TV. ® Press R to return to the previously viewed TV channel . Watch channels from a digital receiver ‡ Switch on the digital receiver. The picture from your receiver might appear automatically on your screen. ® Use the remote control of your digital receiver to select TV channels.
2664.1 eng_aurea_AP 4.5 27-09-2007 12:32 Pagina 12 Watch a DVD 4.6 ‡ Insert a DVD disc in your player. ® Press Play π. The picture from your player appears automatically on your screen. If the picture does not appear: ‡ Press v on the remote control. Select a Teletext page Most TV channels broadcast information via Teletext. TV channels often broadcast information via Teletext. If Teletext is available only English Teletext is supported.
2664.1 eng_aurea_AP 4.7 27-09-2007 12:32 Pagina 13 Change Ambilight mode ENGLISH You can choose among three Ambilight modes and change the light intensity: • Relaxed Sets Ambilight to change soft and smoothly with the images on screen. • Moderate Sets Ambilight between Relaxed and Dynamic. • Dynamic Sets Ambilight to change quick and responsive. To change the Ambilight mode: ‡ Press Ambilight to switch on or off.
2664.1 eng_aurea_AP 5 27-09-2007 12:32 Pagina 14 Use more of your TV This section deals with the more advanced use of your TV: • how to use the menus • to adjust the picture, sound and Ambilight settings • more about Teletext, if available • how to create favourite channel lists 5.1 Remote control 5.1.1 Remote control overview • how to set locks and timers • to set subtitles and select a subtitle language • how you can view your photos or play your favourite music from a USB memory device.
27-09-2007 12:32 Pagina 15 18 Ambilight To switch Ambilight on or off. 19 Subtitles j To activate or deactivate the subtitle mode. 20 ‡ MHEG cancel (only for UK) No function 21 On screen information i To show channel or programme information if available. 22 Volume up or down V To adjust the volume. 23 Menu To switch the menu on or off. 24 Option To switch the Quick access menu on or off. 25 Demo To switch the Demo menu on and to get a demonstration of the features of the TV.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 16 Enter the setup code directly ‡ Press the DVD, STB or HTS key for 4 seconds to select the device mode you need. The selected mode key will light up constantly. ® Enter the three-number code for the type and brand of your device. Most brands have more than one entry code. If you entered the correct code, all mode keys will blink to confirm the selection. If you entered a wrong code, all mode keys will light up for 2 seconds.
27-09-2007 12:32 Pagina 17 • Philips Blu-ray Disc player (setup code 006) Option key = BD Home screen a key = BD Content menu Menu key = BD Disc menu • Digital or Satellite receiver No change of functions. • Home Theatre System Option key = HTS Set up Menu key = HTS Disc menu V key = HTS volume P+/- = HTS Next/Previous 5.2 TV menu overview With the on screen menus you install your TV, adjust picture, sound and Ambilight settings and access features.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 18 5.2.2 Use of the menu Learn to use the menus with this example. ‡ Press Menu on the remote control. º Press navigation key right to enter the picture settings. Picture DEMO Contrast GUIDE a OPTION ® OK LIST MENU MENU BROWSE b BROWSE Contrast Brightness 90 47 Colour Hue 52 0 Sharpness 4 Tint ... The main menu appears on the screen. ◊Press navigation key down to select Brightness.
27-09-2007 12:32 Pagina 19 5.2.3 Quick access menu The Quick access menu gives direct access to some often needed menu items. ‡ Press Option on the remote control. ® Press navigation key up or down to select an option. Ò Press OK to show the selected option menu. † Press navigation key up, down, left, right to adjust the settings in the menu. º Press Option to quit the menu. INPUT v TV DVD STB HTS DEMO GUIDE a OPTION OPTION OK • Subtitles See section 5.9 Subtitles.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 20 5.3.3 Picture settings This section describes how to adjust all picture settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Picture and press navigation key right to enter the list. ® Press navigation key up or down to select a setting.
27-09-2007 12:32 Pagina 21 5.3.4 Widescreen picture format Avoid black bars on the sides or on top and bottom of the picture. Change the picture format to a format that fills the screen. ‡ Press q to switch on the Picture format menu. 4 5 6 7 8 9 i 0 R Ò ‡ π † b q MHEG CANCEL ® j q Unscaled (Only for HD and PC.) Maximum sharpness. Distortion may appear on borders. Black bars may appear with pictures from your PC. ENGLISH 2664.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 22 5.3.5 Sound settings This section describes how to adjust all sound settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Sound and press navigation key right to enter the list. ® Press navigation key up or down to select a setting.
5.4 27-09-2007 12:32 Pagina 23 Ambilight This section describes how to adjust Ambilight settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Ambilight and press navigation key right to enter the list. ® Press navigation key up or down to select a setting. TV settings Ambilight Settings assistant Ambilight Brightness Reset to standard Picture Mode Sound Separation Ambilight Colour boost • Ambilight Switches Ambilight on or off.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 24 5.5.4 Enlarge teletext pages For a more comfortable reading, you can enlarge the teletext page. ‡ Press b and select a teletext page. ® Press Option on the remote control to enlarge the top part of the page. Ò Press Option again to view the enlarged lower part of the page. † Press navigation key up or down to scroll through the enlarged page. º Press Option again to return to the normal page size. 5.5.6 Teletext 2.
5.6 27-09-2007 12:32 Pagina 25 Create favourite channel lists View the All channels list or set up a Favourite list of your own with your preferred TV channels. For example, each member of your family can create his or her own favourite list. 5.6.1 Select a favourite list Learn how to select one of the favourite channel lists. ‡ Press OK. The first time after you have finished the installation, the All channels list is shown. In other situations, it brings up the last selected favourite list. 5.6.
64.1 eng_aurea_AP 5.7 27-09-2007 12:32 Pagina 26 Timers and locks This section describes how to switch the TV on or off at a specified time and to lock or unlock the TV. 5.7.1 Automatically switch to standby Sleeptimer switches the TV to standby after a time. ‡ Press Menu on the remote control and select TV menu > Features > Sleeptimer and press navigation key right to enter the sleeptimer bar. ® Press navigation key up or down to set the time up to 180 minutes in steps of 5 minutes.
-09-2007 12:32 Pagina 27 Lock one or more channels and connected devices ‡ Select Custom lock. ® Press navigation key right to enter. Ò Press navigation key up or down to select Channel lock. † Press navigation key right. º Press navigation key up or down to select the channel(s) you want to lock or unlock. ◊Each time press OK to lock or unlock the channel. 5.8 Subtitles For each TV channel, subtitles can be set, coming from Teletext. ENGLISH 2664.1 eng_aurea_AP 5.8.
2664.1 eng_aurea_AP 5.9 27-09-2007 12:32 Pagina 28 View and play: photos, MP3, ... Watch pictures or listen to music stored on a USB device (not supplied with the TV). Watch your pictures as a slideshow or listen to a self made music playlist. rNote Philips can not be held responsible if your USB device is not supported nor shall Philips accept any liability for damage or loss of stored data. 5.9.1 Insert a USB device Insert a device at the side of the TV while the TV is switched on.
27-09-2007 12:32 Pagina 29 Afrika_2001 — USB — 5.9.4 Thumbnails View the pictures of a selected album in an overview. ‡ Select a picture album. ® Press navigation key right to enter the picture list. Ò Press the green key. † Press navigation key up or down, left or right to highlight a picture. º Press OK to view the picture. ◊Press navigation key left to return to the thumbnail overview. ‹ Press the green key again to go back to the picture list. 5.9.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 30 5.10 Software update Philips continuously tries to improve its products. It may be recommended for you to update the TV’s software. To update your TV software you need a USB Memory device (not supplied). rNote The device must have at least 48Mb free space. Make sure the write protection is turned off. Some USB devices do not work with our TV. Contact your dealer. 5.10.1 Update assistant The Update assistant helps you to update the TV’s software.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 31 ◊The TV switches off.The screen stays black for about 10 seconds. Please, wait. ENGLISH Ò The update process starts automatically. Please wait. USB The update is finished when the message ‘Operation successful’ appears on the screen. Pr ‹The TV switches back on again.The update is done. g Operation Successful! Re USB † Remove the USB memory device from the TV. 5.10.
2664.1 eng_aurea_AP 6 27-09-2007 12:32 Pagina 32 Channel installation The first time you switched on your TV you’ve selected the language of the TV menus and all the available channels have been installed. This chapter will help you if you find it necessary to re-do the initial installation or if you want to tune in a new TV channel. rNotes: - You do not have to follow every step described if it is not necessary.
27-09-2007 12:32 Pagina 33 à Tip If you know the frequency, enter the three numbers of the frequency with the number keys of the remote control. † Press navigation key left when the new channel has been found. º Select Store as new channel to store the new channel under a new channel number. ◊Press navigation key right to enter. ‹ Press OK. Done appears. ≈Press Menu to quit the channel installation menu. 6.2.3 Fine tune a channel Fine tune a found channel when the reception is poor.
2664.1 eng_aurea_AP 6.4 27-09-2007 12:32 Pagina 34 Automatic channel management Once a day, at 3 AM, all available TV channels are updated automatically. The update is done if your TV is in standby. Earlier stored channels not found by the update will be removed from the channel list. You can do this update yourself anytime. ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Installation update.
27-09-2007 12:32 7 Connections 7.1 Connection overview AV 3 Y Pb Pr L AUDIO Pagina 35 ENGLISH 2664.1 eng_aurea_AP 13 1 VIDEO USB L AUDIO R 14 15 2 R AV 2 VIDEO L AUDIO R 3 S-VIDEO Y Pb 16 Pr AV 1 17 4 5 67 8 9 10 11 R AUDIO L VIDEO S-VIDEO 12 DISPLAY SYNC. MONITOR OUT L OUT R IN DIGITAL AUDI O AUDIO OUT DISPLAY SYNC.
2664.1 eng_aurea_AP 7.2 27-09-2007 12:32 Pagina 36 About connecting Learn here how to make the best connection for your device. Six connections are ready to use at the back of the TV - AV1, AV2, AV3, HDMI1, HDMI2 and HDMI3. Connect your device with the highest possible quality connection. Look for the highest quality connection on your device. Use that connection to your TV.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 37 An S-Video cable ENGLISH 7.2.4 S-Video - Good quality ★★ Use a S-Video cable together with an Audio L/R (cinch) cable. Match the cable colours when you connect. Audio L/R cable - Red, White 7.2.5 Video - Basic quality ★ Use a Video (cinch) cable together with an Audio L/R (cinch) cable. Match the cable colours when you connect Combined Video - yellow and Audio L/R cable - red and white 7.2.
2664.1 eng_aurea_AP 7.3 27-09-2007 12:32 Pagina 38 Connect your devices The connections shown in this section are recommendations for the most used cases. Other solutions may be possible. 7.3.1 DVD player Use a YPbPr cable and an audio L and R (cinch) cable to connect the device to the AV1 or AV3 input at the back of the TV.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 39 DVD Recorder and Home Theatre System Use a YPbPr cable and an audio L and R (cinch) cable, 2 antenna cables and 1 digital audio (cinch) cable. AV 3 Y Pb ENGLISH 7.3.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 40 7.3.6 Satellite receiver Use a YPbPr cable and and audio L and R (cinch) cable and 2 antenna cables. AV 3 Y Pb Pr AV1/AV3 YPbPr L AUDIO VIDEO L AUDIO R R AV 2 VIDEO S-VIDEO AV1/AV3 AUDIO L + R L AUDIO R Y Pb Pr AV 1 L OUT L R IN R MONITOR AUDIO OUT OUT DIGITAL AUDIO ANALOG AUDIO IN HDMI 1 HDMI 2 HDMI 3 ANTENNA Satellite receiver 7.3.7 HD Digital receiver / HD satellite receiver Use a HDMI cable and 2 antenna cables.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 41 AV 3 Y Pb ENGLISH 7.3.9 Blu-ray Disc player Use a HDMI cable. Pr L AUDIO VIDEO L AUDIO R R AV 2 VIDEO S-VIDEO Y L AUDIO R Pb Pr AV 1 L R MONITOR AUDIO OUT OUT OUT IN DIGITAL AUDIO HDMI L R ANALOG AUDIO IN HDMI 1 HDMI 2 HDMI 3 ANTENNA Blu-ray Disc player 7.3.10 Game console The most practical connection for a game console is at the side of the TV. More qualitative connections are at the back of the TV. 7.3.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 42 7.3.12 Personal Computer The best connection for a PC is at the back of the TV. A more practical connection, but only for viewing photos and films from your PC, is the connection at the side of the TV. ç Caution Before connecting the PC, set the PC monitor refresh rate to 60Hz. Connected at the back of the TV Use the DVI connection of your PC to connect to a HDMI connection of the TV. Use a HDMI to DVI cable or a HDMI-to-DVI-adaptor.
7.4 27-09-2007 12:32 Pagina 43 Connections setup When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector. 7.4.1 Digital Audio In (if present) If you use the Digital Audio In connection, assign this connection, in the menu, to the device from where the sound comes from. ‡ Press Menu on the remote control and select TV menu > Installation > Connections > Digital Audio In. ® Press navigation key right to enter the list.
2664.
9 27-09-2007 12:32 Pagina 45 Troubleshooting Television and remote control The TV does not switch on • Verify the mains cord connection. • Verify if the batteries of the remote control are flat or weak. Verify their + / - orientation. You can use the keys on the TV to switch the TV on. • Unplug the mains cord, wait for one minute and plug in the mains again. The TV does not react on the remote control • Verify if the batteries of the remote control are not empty or weak. Verify their + / - orientation.
2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 46 The picture position on screen is not correct • Some picture signals from some devices do not fit the screen correctly. You can shift the picture with the navigation key on the remote control. Check the signal output of the device. Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with the ¬ key. • Verify if all cables are connected properly.
2664.
2664.
