2666.3.qxd 15-10-2007 10:21 Pagina 1 1 1.1 1.2 1.3 Important 3 Safety 3 Care of the screen 3 Recycling 3 2 2.1 2.2 Your TV 4 Television overview 4 Product highlights 5 3 3.1 3.2 3.3 3.4 3.5 3.6 Getting started 5 Position the TV 5 Wall mounting - VESA 6 Remote control batteries 8 Antenna cable 8 Connect the mains 8 First time installation 8 4 4.1 4.2 4.3 4.4 4.5 4.6 4.
666.3.qxd 15-10-2007 10:21 2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
1 15-10-2007 10:21 Pagina 3 Important Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions. • Stationary images Avoid stationary images as much as possible. If you can not, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time.
2666.3.qxd 15-10-2007 2 10:21 Pagina 4 Your TV This section gives you an overview of the controls and functions of this TV. 2.
2.2 15-10-2007 10:21 Pagina 5 Product highlights Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... Full High Definition LCD display A full HD resolution of 1920x1080p, the highest resolution HD broadcast can transmit. It offers a brilliant flicker-free progressive scan picture with optimum brightness and superb colours. 3 Getting started ENGLISH 2666.3.
2666.3.qxd 3.2 15-10-2007 10:21 Pagina 6 Wall mounting You can wall mount the TV with the supplied wall mount bracket. 3.2.1 Unmounting the TV stand The TV stand should be unmounted from the TV to allow the TV to be wall mounted. ‡ Unscrew the 2 screws that secure the stand to the TV. 3.2.2 Mounting the wall mount bracket ) Caution Wall mounting the TV requires special skills that should only be performed by qualified personnel.
15-10-2007 10:21 † Mount the 2 spacers at the back of the TV. Pagina 7 on the 2 lower discs ‹ Connect all cables. See section 7 Connections. ENGLISH 2666.3.qxd ≈Lift the TV into the wall mount bracket. º Calculate your TV’s ideal position. 686 mm 102 42" 29kg 1157mm 253.5 752 mm 163 47" 1046mm 198 2 Ú Secure the TV in the bracket by screwing in the 2 already fitted screws . 33kg ◊Position and level the wall mount bracket and fix the bracket firmly to the wall.
2666.3.qxd 3.2.3 15-10-2007 10:21 Pagina 8 VESA compliant mounting 3.3 Remote control batteries ) Caution Use a VESA compliant bracket that meets safety standards according to the TV’s weight. Closely follow the instructions that come with your VESA compliant bracket to mount the TV. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or mounting that results in accident or injury. The TV is prepared for VESA compliant mounting. This bracket is not included.
3.5 15-10-2007 10:21 Pagina 9 Connect the mains cord ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. 4 Use your TV ENGLISH 2666.3.qxd Learn how to operate your TV for daily use. 4.1 Switch on or off - Standby To switch on the TV: • Press B Power at the right side of the TV if the standby led is off.
2666.3.qxd 4.2 15-10-2007 10:21 Pagina 10 Watch TV 4.3 4.2.1 Switch channels ‡ To switch TV channels: • Press a number or press P+ or P- on your remote control. • Press Program/Channel - or + on the side controls of the TV. ® Press R to return to the previously viewed TV channel . Watch channels from a digital receiver ‡ Switch on the digital receiver. The picture from your receiver might appear automatically on your screen. ® Use the remote control of your digital receiver to select TV channels.
4.5 15-10-2007 10:21 Pagina 11 Watch a DVD For more information on teletext, see section 5.5 Teletext. ‡ Insert a DVD disc in your player. ® Press Play π. The picture from your player appears automatically on your screen. If the picture does not appear : ‡ Press v on the remote control. B INPUT v v j MHEG CANCEL b q DEMO GUIDE a OPTION ® Press v repeatedly to select the DVD player. Wait a few seconds until the picture appears. Ò Press OK. † Press Play π. 4.6 4.
2666.3.qxd 5 15-10-2007 10:21 Pagina 12 Use more of your TV This section deals with the more advanced use of your TV: • how to use the menus • to adjust the picture, sound and Ambilight settings • more about Teletext, if available. • how to create favourite channel lists 5.1 Remote control overview • how to set locks and timers • to set subtitles and select a subtitle language • how you can view your photos or play your favourite music from a USB memory device.
15-10-2007 10:21 Pagina 13 17 Volume up or down V To adjust the volume. 18 Menu To switch the menu on or off. 19 Option To switch the Quick access menu on or off. 20 Demo To switch the Demo menu on and to get a demonstration of the features of the TV. 21 Subtitles j To activate or deactivate the subtitle mode. 22 MHEG cancel no function 5.2 TV menu overview ENGLISH 2666.3.qxd With the on screen menus you install your TV, adjust picture, sound and Ambilight settings and access features.
2666.3.qxd 15-10-2007 10:21 Pagina 14 5.2.2 Use of the menu Learn to use the menus with this example. ‡ Press Menu on the remote control. a OPTION OK LIST MENU MENU b BROWSE BROWSE The main menu appears on the screen. Television º Press π to enter the picture settings. Picture Contrast Contrast Brightness 90 47 Colour Hue 52 0 Sharpness 4 Tint ... ◊Press œ to select Brightness.
-10-2007 10:21 Pagina 15 5.2.3 Quick access menu The Quick access menu gives direct access to some often needed menu items. ‡ Press Option on the remote control. ® Press o or œ to select an option. Ò Press OK to show the selected option menu. † Press o, œ, p, π to adjust the settings in the menu. º Press Option to quit the menu. v j MHEG CANCEL b q DEMO GUIDE a OPTION OPTION OK LIST • Subtitles See section 5.8 Subtitles. • Picture format See section 5.3.4 Widescreen picture format.
2666.3.qxd 15-10-2007 10:21 Pagina 16 5.3.3 Picture settings This section describes how to adjust all picture settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Picture and press π to enter the list. ® Press o or œ to select a setting. TV settings Picture Settings assistant Reset to standard Contrast Brightness Picture Colour Sound Hue Ambilight Sharpness Tint Perfect Pixel HD HD Natural Motion 100Hz Clear LCD Dynamic contrast Noise reduction MPEG artefact red.
15-10-2007 10:21 Pagina 17 5.3.4 Widescreen picture format Avoid black bars on the sides or on top and bottom of the picture. Change the picture format to a format that fills the screen. ‡ Press q to switch on the Picture format menu. ® Press o or œ to select an available picture format. Ò Press o to shift the picture upwards to make partly covered subtitles visible. v q j MHEG CANCEL b q DEMO GUIDE a OPTION OK LIST à Tip The Auto format setting is recommended for minimal distortion .
2666.3.qxd 15-10-2007 10:21 Pagina 18 • Dual I/II If broadcasted, you can choose between two different languages. • Mono/stereo If stereo broadcasting is available, you can select Mono or Stereo per TV channel. • Surround mode To select a more spatial sound if broadcasted or if available from a connected device. • Headphone volume Changes the volume of the headphone. You can mute the TV speakers with ¬ on the remote control.
5.5 15-10-2007 10:21 Pagina 19 Teletext If available only English Teletext is supported. China does not support this function due to no Teletext available. Your TV has a 1200 pages memory that stores broadcasted teletext pages and subpages to reduce waiting time. To select a teletext page see section 4.6 Select a Teletext page. 5.5.1 Select pagenumber subpages A teletext page number can hold several subpages. The pages are shown on a bar next to the main pagenumber. ‡ Press b.
2666.3.qxd 5.6 15-10-2007 10:21 Pagina 20 Create favourite channel lists View the All channels list or set up a Favourite list of your own with your preferred TV channels. For example, each member of your family can create his or her own favourite list. 5.6.1 Select a favourite list Learn how to select one of the favourite channel lists. ‡ Press OK. The first time after you have finished the installation, the All channels list is shown.
15-10-2007 10:21 Pagina 21 Ò Press OK to confirm. † Press Menu to quit the menu. à Tip To switch off the On timer, select Off in the On timer menu. Lock a certain programme or all channels from a certain time Child lock Custom lock Lock Custom lock Lock after Channel lock ENGLISH 2666.3.qxd Unlock 5.7.3 Lock TV channels and programmes Lock TV channels and/or programmes from connected devices to prevent children from watching them. Lock and unlock with a four number code.
2666.3.qxd 15-10-2007 10:21 Pagina 22 5.8.2 Activate or deactivate subtitling ‡ Press Menu on the remote control and select TV menu > Features > Subtitle and press π to enter the list. TV menu Features TV settings Features Installation Subtitle Sleeptimer Software update Set/Change code ‡ Press Menu to quit the menu. ® Remove the USB device.
15-10-2007 10:21 Pagina 23 Slideshow settings • Details / More details Shows the picture name, date, size and next picture in the slideshow. • Transitions Shows the list of available transition styles of the pictures. Press o or œ to select and press OK to activate. • Slide time Sets the time lag for the picture transitions: Short, Medium or Long. • Rotate To rotate a picture. • Zoom Show a list of available zoom magnifications to select. • Start/Show To stop and restart the slideshow.
2666.3.qxd 15-10-2007 10:21 Pagina 24 5.10 Software update 5.10.2 Software download from the PC to the USB device Philips continuously tries to improve its products. It may be recommended for you to update the TV’s software. To update your TV software you need a USB Memory device (not supplied). ‡ Insert the USB memory device into a PC linked to the internet. ® Locate and open the file “update.htm” on your USB device. Ò Read the instructions on screen and click on the Send ID button.
15-10-2007 10:21 Pagina 25 Ò The update process starts automatically. Please wait. The update is finished when the message ‘Operation successful’ appears on the screen. Pr ◊The TV switches off.The screen stays black for about 10 seconds. Please, wait. ENGLISH 2666.3.qxd ‹The TV switches back on again.The update is done. g Operation Successful! Re † Remove the USB memory device from the TV. 5.10.
66.3.qxd 6 15-10-2007 10:21 Pagina 26 Channel installation The first time you switched on your TV you’ve selected the language of the TV menus and all the available channels have been installed. This chapter will help you if you find it necessary to re-do the initial installation or if you want to tune in a new TV channel. rNotes: - You do not have to follow every step described if it is not necessary.
15-10-2007 10:21 Pagina 27 ◊Press π to enter. ‹ Press OK. Done appears. ≈Press Menu to quit the channel installation menu. 6.2.3 Fine tune a channel Fine tune a found channel when the reception is poor. ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Analogue: manual installation > Fine tune. ® Press π to enter the Fine tune menu. Ò Press o or œ to adjust the frequency † Press p when you finished fine tuning.
2666.3.qxd 6.5 15-10-2007 10:21 Pagina 28 Factory settings If you are lost in the picture, sound and Ambilight settings, you can reset the TV to the factory settings of picture, sound and Ambilight ‡ Press Menu on the remote control and select TV menu > Installation > Factory settings. ® Press π to enter the Factory settings menu. Ò Press OK. † Press Menu to quit the menu. rNote The channel installation settings are not changed.
2666.3.qxd 15-10-2007 10:21 Pagina 29 Connections 7.1 Connection overview AV 3 Y Pb Pr 17 1 L AUDIO ENGLISH 7 VIDEO USB L AUDIO R 16 15 2 R AV 2 VIDEO R AUDIO L L AUDIO R 3 S-VIDEO Y Pb 14 Pr AV 1 VIDEO 13 4 5 6 7 8 9 10 S-VIDEO 11 12 DISPLAY SYNC. MONITOR OUT L OUT R IN DIGITAL AUDI O AUDIO OUT DISPLAY SYNC.
2666.3.qxd 7.2 15-10-2007 10:21 Pagina 30 About connecting Learn here how to make the best connection for your device. Six connections are ready to use at the back of the TV - AV1, AV2, AV3, HDMI1, HDMI2 and HDMI3. Connect your device with the highest possible quality connection. Look for the highest quality connection on your device. Use that connection to your TV. Connection set up When connecting is done the TV needs to know what connections you made, which device is connected to which connector.
2666.3.qxd 15-10-2007 10:21 Pagina 31 An S-Video cable ENGLISH 7.2.4 S-Video - Good quality ★★ Use a S-Video cable together with an Audio L/R (cinch) cable. Match the cable colours when you connect. Audio L/R cable - Red, White 7.2.5 Video - Basic quality ★ Use a Video (cinch) cable together with an Audio L/R (cinch) cable. Match the cable colours when you connect Combined Video - yellow and Audio L/R cable - red and white 7.2.
2666.3.qxd 15-10-2007 7.3 10:21 Pagina 32 Connect your devices The connections shown in this section are recommendations for the most used cases. Other solutions may be possible. 7.3.1 DVD player Use a YPbPr cable and an audio L and R (cinch) cable to connect the device to the AV1 or AV3 input at the back of the TV.
2666.3.qxd 15-10-2007 10:21 Pagina 33 DVD Recorder and Home Theatre System Use a YPbPr cable and an audio L and R (cinch) cable, 2 antenna cables and 1 digital audio (cinch) cable. AV 3 Y Pb ENGLISH 7.3.
2666.3.qxd 15-10-2007 10:21 Pagina 34 7.3.6 Satellite receiver Use a YPbPr cable and and audio L and R (cinch) cable and 2 antenna cables. AV 3 Y Pb Pr AV1/AV3 YPbPr L AUDIO VIDEO L AUDIO R R AV 2 VIDEO S-VIDEO AV1/AV3 AUDIO L + R L AUDIO R Y Pb Pr AV 1 L OUT L R IN R MONITOR AUDIO OUT OUT DIGITAL AUDIO ANALOG AUDIO IN HDMI 1 HDMI 2 HDMI 3 ANTENNA Satellite receiver 7.3.7 HD Digital receiver / HD satellite receiver Use a HDMI cable and 2 antenna cables.
15-10-2007 10:21 Pagina 35 ENGLISH 2666.3.qxd 7.3.9 Blu-ray Disc player Use a HDMI cable. AV 3 Y Pb Pr L AUDIO VIDEO L AUDIO R R AV 2 VIDEO S-VIDEO Y L AUDIO R Pb Pr AV 1 L R MONITOR AUDIO OUT OUT OUT IN DIGITAL AUDIO HDMI L R ANALOG AUDIO IN HDMI 1 HDMI 2 HDMI 3 ANTENNA Blu-ray Disc player 7.3.10 Game console The most practical connection for a game console is at the side of the TV. More qualitative connections are at the back of the TV. 7.3.
2666.3.qxd 15-10-2007 10:21 Pagina 36 7.3.12 Personal Computer The best connection for a PC is at the back of the TV. A more practical connection, but only for viewing photos and films from your PC, is the connection at the side of the TV. ç Caution Before connecting the PC, set the PC monitor refresh rate to 60Hz. Connected at the back of the TV Use the DVI connection of your PC to connect to a HDMI connection of the TV. Use a HDMI to DVI cable or a HDMI-to-DVI-adaptor.
7.4 15-10-2007 10:21 Pagina 37 Connections setup When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector. 7.4.1 Digital Audio In (if present) If you use the Digital Audio In connection, assign this connection, in the menu, to the device from where the sound comes from. ‡ Press Menu on the remote control and select TV menu > Installation > Connections > Digital Audio In. ® Press π to enter the list.
2666.3.
9 15-10-2007 10:21 Pagina 39 Troubleshooting Television and remote control The TV does not switch on • Verify the mains cord connection. • Verify if the batteries of the remote control are flat or weak. Verify their + / - orientation. You can use the keys on the TV to switch the TV on. • Unplug the mains cord, wait for one minute and plug in the mains again. The TV does not react on the remote control • Verify if the batteries of the remote control are not empty or weak. Verify their + / - orientation.
2666.3.qxd 15-10-2007 10:21 Pagina 40 Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with the ¬ key. • Verify if all cables are connected properly. • If no sound signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate malfunction. The sound is poor • Verify if the sound is set to Stereo. • Verify the Equalizer settings.
2666.3.
2666.3.qxd 15-10-2007 O OK key 12 On timer 20 P Personal Computer connect 36 display resolutions 38 Photo viewer 24 Picture format 16 menu 16 Perfect Pixel HD 16 Position the TV 5 Power 9 Programme up/down 12 10:21 Pagina 42 T Technical data 38 Teletext 19 teletext 2.
