Register your product and get support at www.philips.
1 Notice 3 2 Important 4 3 Your product 6 6 22 23 23 25 8 Product information Product overview 4 Use your product Switch your TV on/off or to standby Switch channels Watch connected devices Adjust TV volume Use Ambilight 8 8 8 9 9 9 5 Use more of your product 10 Access TV menus 10 Change picture and sound settings 10 Change Ambilight settings 13 Create and use lists of favorite channels 13 Use timers 14 Use child control and rating locks 14 Use the TV clock 15 View photos, play music and watch v
2 EN
2009 © Koninklijke Philips Electronics N.V. All rights reserved. Speci cations are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or re! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times. • When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage! • Avoid using earphones or headphones at high volumes or for prolonged periods of time.
3 Your product Remote control Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your product at www.philips.com/welcome. 29 1 2 3 4 5 28 27 26 25 Product overview 6 7 24 This section gives you an overview of commonly used controls and functions. 8 9 Side controls and indicators 10 23 11 12 13 14 15 4 3 2 16 22 17 1 a POWER: Switches the product on or off.
( ) Not used. s 0-9 (Numeric buttons) Selects a channel or setting. c ( ) Selects connected devices. t PFL6609: Toggles between Ambilight modes. d Color buttons Selects tasks or options. PFL5409/PFL5609: ( ) Launches the smart picture menu. e Sets a delay after which the TV switches to standby. u PFL6609: f Switches Ambilight on or off. Switches Stereo and Nicam Stereo to Mono. Selects rst language (Dual I) or second language (Dual II) in bilingual programs.
4 Use your product Switch channels This section helps you perform basic operations (see ‘Use more of your product’ on page 10). Switch your TV on/off or to standby • To switch on • If the standby indicator is off, press POWER at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control. To switch to standby • Press (Standby-On) on the remote control. » The standby indicator switches to red. To switch off • Press POWER at the side of the TV.
Adjust TV volume Engl i s h Watch connected devices Use the source button 1 Press ( ). » The source list appears. 2 Press or device. 3 Press to select the connected to con rm selection. Use the home menu To increase or decrease volume • Press . • Press VOLUME +/- on the side of the TV. To mute or unmute sound • Press ( ) to mute audio. • Press ( ) again to restore audio. Use Ambilight Note • You can add new devices to the home menu for easy access . 1 Press (Home). » The home menu appears.
5 Use more of your product 3 4 Press Press to con rm your choice. (Home) to exit. Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Press (Home). » The home menu appears. 2 3 Press Access the home menu The home menu gives you easy access to connected devices, picture and sound settings as well as other useful features.
• Use smart picture to apply pre-de ned picture settings. • 1 2 • 3 4 Press (Home). Press to select [Setup] > [Picture] > [Smart picture]. » The [Smart picture] menu appears. Press to select from the following smart picture settings: • [Personal] : Lists customized personal picture settings. • [Vivid] : Maximizes picture settings. • [Standard] : Adjusts picture settings to suit most environments and types of video. • [Movie] : Applies picture settings ideally suited for movie viewing.
Summary of picture formats Use smart sound The following picture settings can be con gured. Use smart sound to apply pre-de ned sound settings. 1 2 Note • Depending on the format of the picture source, some picture settings are not available. [Movie exp.16:9] (Not for HD and PC mode.) Scales 4:3 format to 16:9. [Wide screen] Stretches the classic 4:3 format to 16:9. [Unscaled] For HD and PC mode only, and in selected models only. Allows maximum sharpness.
• • » If you selected a favorite list, only channels in the list appear in the channel grid; if you selected [All], all installed channels appear in the channel grid. 6 Press ( Engl i s h [Headphone volume] : Adjusts headphone volume. [Auto volume leveling] : Automatically reduces sudden volume changes, for example, when switching channels. When enabled, this produces a more consistent audio volume.
3 Press ( ). » The channel options menu appears. Automatically switch the TV on (on timer) 4 5 Press You can switch the TV to a speci ed channel at a speci ed time, from standby. 6 to select [Unmark as favourite]. Press . » The channel is removed from the favorite list. Press ( / ) to exit the channel options menu. » The updated channel grid appears, displaying the current channels in the favorite list.
Locking the TV prevents your child from accessing all channels and connected devices. 1 Press (Home). 2 Press to select [Setup] > [Features] > [TV lock]. » A message appears prompting you to enter your PIN code. 3 Enter your PIN code with the Numeric buttons. » The [TV lock] menu appears. 4 5 Press to select [Lock] or [Unlock]. Press . » All channels and connected devices are locked or unlocked. Lock or unlock one or more channels 1 2 3 4 Press ( ). » The channel grid appears.
Connect a USB storage device and enter the content browser 1 2 View a slide show of your photos 1 When a full screen image of a photo is displayed, press or . » A slide show begins from the selected image. 2 Press: • to pause the slide show. • or to go back or move forward to the next image. • ( / ) or to stop the slide show and return to the USB content browser. Turn on the TV. Connect the USB device to the USB port on the side of the TV. 3 Press (Home). » The home menu appears.
You can view a slide show of your stored pictures with background music. 1 Select an album of songs. 2 Press . 3 Press . 4 Select an album of pictures. 5 Press . Walllpaper slide show Make sure the wallpaper is not yet activated. 1 2 Connect a USB storage device to the TV. Press . » All pictures in the USB storage device are displayed. Note • The wallpaper display duration is determined by the pre-de ned sleep timer settings (see ‘Automatically switch the TV to standby (sleep timer)’ on page 14).
• Update the TV software • Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. • • Check the current software version 1 2 Press Select [Setup] > [Software update] > [Current software info]. Download the software 1 2 3 4 On your PC, open a web browser and go to www.philips.com/support.
5 6 The rst time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and ne tune channels. 1 2 3 4 Press (Home). Select [Installation] > [Channel install.] > [Channel assistant]. Press . to select a system from the . 1 2 Press (Home). Press to select [Setup] > [Installation] > [Channel install.] > [Manual install]. » The [Manual install] menu appears.
Rearrange channels After you install channels, you can rearrange the order in which they appear. 1 When watching TV, press the channel grid. 2 Press ( ). » The channel options menu appears. 3 4 Press to display to select [Reorder]. Select the channel you want to reorder and press . 5 Press to select the new position for the channel. 6 7 Press to con rm the new position. Press ( ). » [Done reordering] appears. 8 Press 20 EN to nish reordering.
f AV1 ( VIDEO IN and AUDIO IN L/R) Analog audio and video input from analog or digital devices such as DVD players, satellite receivers and VCRs. This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. g CVI 1/2 ( Y Pb Pr and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players or game consoles.
• Connect a computer Before connecting a computer to the TV • Set the monitor refresh rate on your computer to 60Hz. ( ) and change the TV picture • Press format to [Unscaled]. Connect a computer with one of the following connectors: HDMI cable and HDMI-DVI adaptor PC AUDIO IN/ PC IN(AUDIO) DVI Note • Connections via DVI or VGA require an additional audio cable.
Use Philips EasyLink After connecting devices, assign the device attached to each connector. This allows you to easily identify devices connected to your TV. Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. 1 2 3 4 5 6 Press (Home). Select [Add new device] and press Press or . to select a device. Press .
EasyLink buttons You can control EasyLink-compliant devices with the following buttons on the remote control of your TV. Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. Button (Play/ Pause) EasyLink function Starts, pauses or resumes playback on your EasyLink device. (Stop) Stops playback on your EasyLink device. (Record) Starts or stops video recording on your EasyLink device. (Fast Searches backward. Backward) (Fast Searches forward.
Engl i s h Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
• • • Engl i s h Power Mains power: AC 110-240 (50-60Hz) Standby power: < 0.15W Ambient temperature: 5 to 35 degrees Celsius Supported TV mounts To mount the TV, purchase a Philips TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. Warning • Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V.
9 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The remote control is not working properly: • Check that the remote control batteries are correctly inserted according to the +/- orientation. • Replace the remote control batteries if they are at or weak.
Picture signals from some devices may not t the screen correctly. Check the signal output of the device. Sound issues Computer connection issues The computer display on the TV is not stable: Check that a supported resolution and • refresh rate is selected on the computer. Set the TV picture format to unscaled. • There is picture but no sound from the TV: Note • If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction.
F 10 Index factory settings favorite list select set up 18 13 13 A Ambilight 9 HDMI cable troubleshooting B batteries bracket 26 , 28 27 Channel list favorite troubleshooting update channels favorite list install automatic manual rename clock computer format technical speci cations connections HDMI troubleshooting technical speci cations troubleshooting 13 28 13 13 19 19 19 15 26 29 26 29 D demo display resolution screen saver 18 26 17 E EasyLink disable enable environmental care EN 29 I in
28 tuner technical speci cations wall mount TV lock lock channels lock connected devices PIN code 26 28 V 10 28 R reception remote control technical speci cations troubleshooting S Screen saver settings assistant sleep timer slideshow with music Smart settings software update analog version sound settings standby troubleshooting 17 10 14 17 11, 12 26 27 15 15 28 Video format video format technical speci cations volume adjust 26 9 W Wallpaper 17 18 18 12 28 T technical specifcations timer on ti
© 2009 Koninklijke Philips Electronics N.V. All rights reserved.
