Register your product and get support at www.philips.
Contents 1 2 3 4 5 EN Important Safety Care Legal Sustainability Help and support 3 3 5 6 8 10 Use your TV 11 TV controls Watch TV View program guide Watch 3D Ambilight Play multimedia files Smart TV Interactive TV 11 13 16 18 19 20 23 25 Use more of your TV 26 Pause TV Record TV shows Use Skype™ Play games View Teletext Set locks and timers 26 27 30 33 34 35 Change your TV settings 37 Picture and sound Channels Language settings Universal access settings Other settings Update software Res
Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilled on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips TV Consumer Care to have the TV checked before use.
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the surface. • Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. • Educate children about the dangers of climbing on furniture to reach the TV.
Screen • • • • • Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. Unplug the TV before cleaning. Clean the TV and frame with a soft damp cloth and wipe gently. Avoid touching the Ambilight LEDs on the back side of the TV. Never use substances such as alcohol, chemicals or household cleaners on the TV. To avoid deformations and color fading, wipe off water drops as soon as possible. Avoid stationary images as much as possible.
Legal • Notice 2014 © TP Vision Netherlands B.V. All rights reserved. This product was brought to the market by TP Vision Netherlands B.V. or one of its affiliates, further referred to in this document as TP Vision, which is the manufacturer of the product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. Specifications are subject to change without notice.
TP Vision Netherlands B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain the source code, please write in English to: "Intellectual Property Department, TP Vision Netherlands B.V., P.O.
PlayReady Final Products Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Help and support Use Help To access the onscreen [Help] menu, press the Blue button. To exit from the [Help] menu, press . Visit Philips website If you can't find what you need in the onscreen [Help], visit the Philips support website at www.philips.com/support.
Remote control English 2 Use your TV TV controls Rear controls 1. (Standby): Switch the TV on or to standby. 2. Play buttons: Control playback of multimedia files. 3. GUIDE: Access TV guide. 4. 3D: Switch on 3D. SOURCE: Watch a connected device. 5. 6. AMBILIGHT: Switch Ambilight on or off. 7. TV: Watch TV. 8. FORMAT: Change picture format. 1. VOL +/- (Volume): Increase or decrease volume. : Switch to the next or previous 2. CH channel. 3. INPUT: Watch a connected device. 4. :Switch the TV on or off.
EasyLink controls If you connect your TV to HDMI-CEC enabled devices, such as a Blu-ray player or home theater, you can control them at the same time with one remote control. Simply switch on EasyLink after connection. Read more about Easylink in Connect your TV > Set up Easylink devices > Control devices (Page 57). 13. LIST: Access the TV channel list. EXIT: Exit from menus or TV 14. functions. INFO: Display information about 15. current activity. OPTIONS: Access currently available 16.
Switch TV on or off Automatic switch off You can save energy with this TV's energy efficiency settings, which are enabled by default. If there is no user interaction (such as pressing a remote control button or a control on the TV) for four hours, the TV will automatically switch to standby. To disable automatic switch off 1. While you watch TV, press the Green button on the remote control. 2. Select [Auto switch off], then press OK. 3. Use the Navigation buttons to make a selection, then press OK.
Switch TV channels • • • Press CH +/- on the remote control. on the TV. Press CH Press the Numeric buttons on the remote control to enter a channel number. Manage favorite channels You can view all channels or only a list of your favorite channels. Create a list of your favorite channels LIST. 1. Press The channel list is displayed. 2. Select the channel to mark as favorite, then press OPTIONS. 3. Select [Add/remove favourites], then press OK. The selected channel is marked with an asterisk.
Listen to digital radio If digital radio channels are available, you can listen to them. They are installed automatically when you install the TV channels. 1. While you watch TV, press LIST. The channel list is displayed. OPTIONS. 2. Press 3. Select [Filter] > [Radio], then press OK. 4. Select a radio channel, then press OK. Watch connected devices Before you can watch a device, connect the device to the TV. See Connect your TV > Connect devices (Page 47). Select a device with SOURCE 1.
Select your preferred sound settings 1. While you watch TV, press OPTIONS. 2. Select [Picture and sound] > [Sound style], then press OK. 3. Select an option, then press OK: • [Personal]: Apply your personalized sound settings. • [Original]: Settings that suit most environments and types of audio. • [Movie]: Ideal settings for movies. • [Music]: Ideal settings for listening to music. • [Game]: Ideal settings for games. • [News]: Ideal settings for spoken audio, such as the news.
From the Internet Make sure that your TV is connected to the Internet through a high-speed broadband connection. See Connect your TV > Connect to a network and the Internet (Page 59). Select Internet program guide Before you use the program guide, check these settings: 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [TV guide]. 3. Select [From the Internet], then press OK. Access Internet program guide 1. Press . 2. Select [TV guide], then press OK. OPTIONS. 1.
Watch 3D What you need Your TV is a 3D TV. Before you watch 3D, read the health warning information in Important > Safety > 3D health warning (Page 4). To watch 3D on this TV, use the Philips Easy 3D passive glasses supplied with your TV. Note: • If you need additional glasses, purchase the Philips Easy 3D glasses, PTA417. 3D glasses from other brands may reduce or lose the 3D effect. • Some 3D formats are not supported.
Convert 2D to 3D You can convert any 2D program to watch it in 3D. 1. Press 3D, then select [2D to 3D conversion]. To switch off 2D to 3D conversion: 1. Press 3D, then select [2D]. Note: If you switch to another activity, the conversion stops. To adjust the 3D depth: 1. Press . 2. Select [Setup] > [TV settings]. 3. Select [3D] > [3D effect]. Ambilight English Select 3D input format The TV detects when 3D is available and prompts you to put on your 3D glasses to start watching.
Change settings 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Ambilight]. 3. Select a setting, then press OK. • [Mode]: Select an Ambilight mode from [Off], [Dynamic] or [Static]. - [Off]: Switch off Ambilight. - [Dynamic]: Select if you want Ambilight to respond to onscreen images. - [Static]: Select if you want to set a specific Ambilight color. • [Brightness]: Adjust Ambilight brightness. • [Dynamic]: Adjust the Ambilight response speed to the onscreen images.
Play files from USB device If you have photos, videos or music files on a USB storage device, you can play the files on TV. Caution: • TP Vision is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data in the device. • Do not overload the USB port. If you connect a USB storage device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Browse USB device 1.
Listen to music 1. Select in the top bar. 2. Select a track, then press OK. 3. Optional: To play all the tracks in a folder, select a track, then select [Play all]. • To skip to the next or previous track, press CH+ or CH-. • To pause the track, press OK. Press OK again to resume playback. • To skip forward or backward 10 or . seconds, press • To search forward or backward, press or . Press repeatedly to toggle between different speeds. • To stop the music, press .
What you need 1. On your home network, connect the TV to the Internet. 2. On your TV, configure Smart TV. 3. Optional: On your PC, register with Philips to enjoy exclusive benefits and receive updates on product information. You can register at any time.
Access Smart TV apps You can access apps through the Smart TV home page. The icons on this page represent the apps installed on your TV. To access an app, select the app, then press OK to confirm. Add apps 1. Select [App Gallery], then press OK. 2. Select an app, then press OK to add it to your home screen. 3. Follow the onscreen instructions to add the app. Tips: • You can search for apps available in other countries. • To return to the Smart TV home page, LIST.
Interactive TV What you can do With interactive TV, you can view additional information or entertainment pages provided by digital TV broadcasters. You can experience true interactivity by responding directly to the digital content. Note: You cannot download files to your TV with this feature.
3 Use more of your TV Pause TV What you can do While you watch a digital channel, you can pause a program to answer a phone call or to have a break. The broadcast is stored on a USB hard drive that is connected to the TV. You can resume playback of the program at any time. Note: • You can pause a program for a maximum of 90 minutes. • The USB hard drive is formatted exclusively for this TV. Keep it permanently connected to the TV. You cannot access the contents of the USB hard drive from another TV or PC.
Record TV shows English Pause a live TV broadcast What you can do If your TV can receive program guides, you can record TV programs onto a USB hard drive. You can record both current TV programs as well as future TV programs. Note: • Recording is only supported in countries with program guides. • In Nordic countries, the TV provides limited support for subtitles while recording TV programs. What you need to pause a 1. On a digital channel, press TV program. 2. Press to continue watching.
• Do not overload the USB port. If you connect a USB hard drive device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Note: • Make sure that the TV and the USB hard drive are switched off. • While you are formatting the USB hard drive, do not connect other USB devices to the TV. 1. Connect the USB hard drive directly to the TV, or if you intend to connect other USB devices in future, connect the USB hard drive through a USB hub. 2.
Watch recordings 1. Press . 2. Select [Recordings], then press OK. A list of recordings is displayed. 3. Select a recording from the list, then press OK. The recording starts to play. Sort recordings 1. Press . 2. Select [Recordings], then press OK. A list of recordings is displayed. OPTIONS. 3. Press 4. Select an option to sort by name, date, expiry date or type, then press OK.
Use Skype™ What you can do • • • • • • Talk to anyone else on Skype, anywhere in the world, for free. Make low-cost calls to phones and mobiles. A Skype subscription is required. Visit www.skype.com. Participate in conference calls. Send and receive voicemails. Forward a call. Manage your online status, 'mood' message, and profile information. Note: • No emergency calls with Skype. Skype is not a replacement for your telephone and cannot be used for emergency calls.
You can add and view contacts that are online or offline. You can also block or unblock a selected contact. Add a contact 1. In the Skype menu, select [Contacts], then press OK. OPTIONS, then select [Add 2. Press Skype contact] or [Add SkypeOut Contact]. 3. Press OK to display the onscreen keyboard. 4. Follow the onscreen instructions to enter the details. A list of profiles is displayed. 5. Select a contact, then press OK. An invitation request is sent to the contact.
Full screen view If your contact has a camera connected and accepts the call, you can see the person on your TV, in full screen. To check what your contact can see, view the display in the small screen on your TV. OPTIONS. 1. During the call, press 2. Select [Full view], then press OK. Zoom and pan your video 1. In [Full view], select [Zoom] +/- to zoom in or zoom out. A zoom and pan icon appears above the video display. 2. Use the Navigation buttons on the remote control to pan or tilt the camera.
If someone calls you on Skype and you are offline, they can leave a voice message in your Skype voicemail. Before you can receive voicemail, you need to activate voicemail in your Skype account — this can only be done on your computer. Play voicemail 1. In the Skype menu, select [History] and press OK. 2. Select [Voicemails], then press OK. 3. Select the voicemail, then press OK to play it. Delete voicemails 1. Select the voicemail from the list and OPTIONS. press 2.
5. Press OPTIONS on the TV remote control. 6. Select [Picture and sound] > [Two-player gaming]. 7. Select [Top / bottom] or [Side by side], then press OK. 8. Put on the two-player glasses to view the different screens. 9. To exit, press twice. Tip: To view game menus or scores, press OK to switch viewing mode. Game settings Picture setting for games You can optimize the TV display for gaming without picture lag. 1. Press . 2. Select [Setup] > [TV settings] > [Picture], then press OK. 3.
For digital TV channels where the broadcasters provide different teletext languages, you can select your preferred primary and secondary language. 1. Press . 2. Select [Setup] > [Channel settings]. 3. Select [Languages] > [Primary Text] or [Secondary Text]. 4. Select a language, then press OK. Subpages If the teletext page contains several subpages, you can view each subpage in succession. These subpages are shown on a bar next to the main page number. Press or to select them.
Set the clock manually You can set the date and time manually. Before you start, set the clock mode to [Manual]. 1. In the [Clock] menu, select [Date] or [Time], then press OK. 2. Set the time or date with the Navigation buttons. 3. Select [Done], then press OK. Sleep timer You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleep timer. 1. Press . 2.
• Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Continue], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. • More picture settings You can change the settings in the Picture menu. 1. Press . 2.
More sound settings You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to change, then press OK. • [Sound style]: Access predefined sound settings. • [Restore style]: Restore the last-selected predefined sound setting. • [Bass]: Adjust the bass level of the speaker and headphones. • [Treble]: Adjust the treble level of the speaker and headphones.
Automatic installation When the TV was switched on for the first time, a full installation of channels was performed. To change your language, country, and reinstall all available TV channels, you can run this full installation again. Start installation Note: If you are prompted to enter a code, enter '8888'. 1. Press . 2. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. 3. Select your country, then press OK. 4.
Install digital channels Update channel list If you know the channel frequency of the channels you want to install, you can search and store digital channels one by one. For best results, contact the service provider. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Digital: Reception test] > [Search channel], then press OK. 4. Press the Numeric buttons to enter the channel frequency. 5. Select [Search], then press OK. 6.
ATTENTION: This feature is intended for dealers and service personnel. You can copy channel lists from one Philips TV to another through a USB storage device. You do not need to search for channels or install them again on the second TV. The channel list file is small enough to fit on any USB storage device.
Language settings Menu language 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [General settings] > [Menu language]. 3. Select a menu language from the list, then press OK. Audio language If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language. 1. While you watch TV, press OPTIONS. 2. For digital channels, select [Audio language]. For analog channels, select [Dual I-II]. Press OK to confirm your selection. 3.
To make sure that a hearing impaired audio language is available, press OPTIONS, then select [Audio language]. Languages that support hearing impaired audio are indicated with an ear-shaped icon. Switch on hearing impaired audio and subtitles OPTIONS. 1. While you watch TV, press 2. Select [Universal access] > [Hearing impaired]. 3. Select a setting, then press OK. • [Off]: Switch off hearing impaired features. • [On]: Switch on hearing impaired audio and subtitles.
Other settings TV demo You can watch a demo to find out more about the features on this TV. 1. While you watch TV, press . 2. Select [Setup] > [Watch demos], then press OK. 3. Select a demo, then press OK. Home mode Some TV settings may not be available in Shop mode. To make sure that the correct TV settings are applied, set the TV to Home mode. 1. While you watch TV, press . 2. Select [Setup], then press OK. 3. Select [TV settings] > [General settings] > [Location]. 4.
Update from digital broadcast When available, the TV can receive software updates through digital broadcasts. When a software update is received, you are prompted to update the software. We strongly recommend that you update the software when prompted. Follow the onscreen instructions. If you do not update the TV software when the update is received, you are prompted to save the update file. To update the software later: 1. Press . 2. Select [Setup] > [Software settings] > [Local updates]. 3.
5 Connect your TV About cables Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections shown in this user manual are recommendations only. Other solutions are possible. For more examples, visit http://www.connectivityguide.philips.com.
English Connect antenna Connect the antenna to the TV. Connect devices Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
TV receiver Connect the digital TV receiver with an antenna cable to the TV. Connect the satellite or digital TV receiver with an HDMI cable to the TV. Connect the digital TV receiver with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Video recorder English Connect the recorder with an antenna cable to the TV. Connect the recorder with an HDMI cable to the TV. Connect the recorder with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Game console Connect the game console with an HDMI cable to the TV. Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. Home theater Connect an HDMI-ARC compliant home theater with an HDMI cable to the TV.
English Connect the home theater with an HDMI cable and a coaxial audio cable to the TV. Connect the home theater with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. Digital camera Connect the digital camera with a USB cable to the TV.
Digital camcorder Connect the digital camcorder with an HDMI cable to the TV. Connect the digital camcorder with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
English Connect more devices USB storage device Connect the USB hard drive with a USB cable to the TV. Connect the USB flash drive with a USB cable to the TV.
Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable and an audio cable to the TV. Video call camera Connect the Philips TV video camera - PTA317 (sold separately) with a USB cable to the TV.
USB keyboard You can connect a USB keyboard to enter text such as device names on the TV or text for Smart TV apps. USB mouse You can connect a USB mouse to navigate pages on the Internet and click on links. Note: • If you need extra USB connectors, use a USB hub. • You can also connect the USB mouse to a connected USB keyboard. Connect the keyboard and mouse with a USB cable to the TV. When the TV detects the keyboard, you can select the keyboard layout and test your selection.
Watch connected devices Select a device Before you can watch a device, connect the device to the TV. See Connect your TV > Connect devices (Page 47). Select a device with SOURCE 1. Press SOURCE on the remote control, or INPUT on the TV. 2. Select a device, then press OK. Select a device from Home menu 1. Press . 2. Select [Source], then press OK. 3. Select a device, then press OK. Update the source list If you add or remove a device, update the source list. 1. Press SOURCE. 2. Press OPTIONS. 3.
What you need • Connect a HDMI-CEC compliant device to the TV. You can connect more than one HDMI-CEC device. See Connect your TV > Connect devices (Page 47). • Configure each HDMI-CEC compliant device properly. • Switch on EasyLink. Switch on EasyLink 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [EasyLink]. 3. Select [EasyLink] > [On], then press OK.
Select speaker output If a connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure you connect the device to the HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI (Page 46). Switch on HDMI ARC 1. Press . 2. Select [Setup] > [TV settings] > [Sound] > [Advanced] > [HDMI 1 - ARC]. 3. Select one of the following, then press OK.
Connect English Connect to a network and the Internet What you can do View Media If you connect the TV to a home network, you can play photos, music and videos from your computer. See Use your TV > Play multimedia files (Page 20). Smart TV If you connect the TV to a home network with an Internet connection, you can browse Smart TV. Smart TV offers Internet services and websites tailored to your TV. Play music and videos, consult infotainment, rent movies and much more. See Use your TV > Smart TV (Page 23).
Wi-Fi integrated This section is only applicable for Wi-Fi integrated TVs. You can connect your TV to your home network wirelessly. Note: • The wireless network operates in the same 2.4 GHz frequency spectrum as common household devices, such as Dect phones, microwave ovens or Bluetooth devices, which can cause Wi-Fi interference. Move these devices away from the TV. • For optimum Wi-Fi performance, place the TV at a distance of less than 10 m from the wireless router.
English Set secured connection with WEP encryption If your router has WEP security, the TV asks for the WEP encryption key in hexadecimal numbers. 1. Locate the hexadecimal key in the router software on your PC and make a note of of the first key in the WEP keys list. 2. Enter the security key on the TV with the remote control to connect to the router. 3. If prompted, agree to the End User License Agreement.
6 Troubleshooting General issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Make sure that the power cable is securely connected. When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis: No action is required. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance.
You want to install TV channels: See Change your TV settings > Automatic installation (Page 39) for instructions on installing analog or digital channels. No digital channels were found during the installation: • See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. • Make sure that all cables are properly connected and that the correct network is selected.
Sound issues Connection issues There is picture but no sound from the TV: If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. • Make sure that all cables are properly connected. • Make sure that the volume is not muted or set to zero. • Make sure that the TV speakers setting is selected. Press OPTIONS, select [Picture and sound] > [Speakers], and then select [TV].
Contact Philips You want to establish a wireless connection between your TV and home network: Refer to Connect your TV > Connect to a network and the Internet > Wi-Fi integrated (Page 60) for instructions on how to connect your TV wirelessly to your home network. Smart TV does not work: Check that the router is properly connected to the TV, and that your router has open access to the Internet.
7 Specifications Power and reception Product specifications are subject to change without notice. Power • Mains power: AC 220-240V (50-60Hz) • Standby power consumption: < 0.5 W • Ambient temperature: 5 to 40 degree Celsius • For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2).
Note: Multimedia file names must not exceed 128 characters. Supported multimedia connections • USB: Connect only those USB devices that consume 500mA of power or less. - NTFS, FAT 16 (Read only) - FAT 32 • Ethernet LAN RJ-45 Supported image files • JPEG: *.jpg, *.jpeg, *.mpo • GIF (87a, 89a): *.gif • PNG: *.png • BMP: *.bmp, *.dib • JPS: *.jps • PNS: *.pns • BMS: *.
Supported audio/video formats Supported audio/video formats Supported audio/video formats Supported audio formats EN 68
English Supported audio formats Supported subtitle formats Character encoding • Windows-1250 (CP-1250): Central Europe and Eastern Europe Latin (Czech, Hungarian, Polish, Slovak, Slovenian, Croatian, Romanian, Serbian) • Windows-1251 (CP-1251): Cyrillic • Windows-1252 (CP-1252): Western Europe Latin • Windows-1253 (CP-1253): Greek • Windows-1254 (CP-1254): Turkish • UTF-8: Multi-byte character encoding for Unicode Supported DLNA-compliant media server software • Windows Media Player (Microsoft Windows) •
8 Index channels, rename • 14 3 channels, switch • 14 channels, sort • 14 channels, update • 40 3D • 18 3D glasses, care • 5 3D, 2D to 3D • 19 3D, change format • 18 3D, health warning • 4 3D, start • 18 3D, switch off • 18 A child lock • 36 clock • 35 codecs, supported • 67 computer, play files • 20 connect, computer • 54 connect, digital camcorder • 52 connect, digital camera • 51 connect, disc player • 47 Ambilight • 19 Ambilight, lounge light • 19 Ambilight, settings • 20 Ambilight, switch on •
Help, version • 69 digital radio • 14 home mode • 44 disc player, connect • 47 home network • 59 display resolutions • 66 home theater, connect • 50 display specifications • 66 DivX VOD • 22 DLNA • 20 I install channels, automatic • 39 DTVi • 25 Interactive TV • 25 E Internet, Smart TV • 23 EasyLink • 56 EasyLink, controls • 57 EasyLink, enable • 57 Internet, connect • 59 K Kensington lock • 5 EasyLink, features • 56 key beep • 42 EasyLink, onscreen control • 12 L EasyLink, remote contro
P S parental rating • 36 safety • 3 pause TV • 26 schedule, recordings • 28 pause TV, USB hard drive • 26 screen care • 5 PC, display resolutions • 66 sensors • 11 Philips video camera • 54 settings assistant • 37 picture format • 16 settings, audio format • 38 picture settings • 37 settings, game • 34 picture settings, reset • 38 settings, network • 61 Pixel Plus link • 58 settings, picture • 37 placement, stand or wall • 5 settings, sound • 38 placement, tips • 5 shop mode • 44 pla
visually impaired access • 43 standby • 13 volume • 13 standby LED • 11 subtitles, analog • 42 W subtitles, digital • 42 Wi-Fi integrated, setup • 60 subtitles, language • 42 Y sustainability • 8 switch TV on, off • 13 English source, update • 56 YouTube • 23 YPbPr, component video • 46 T teletext 2.
All registered and unregistered trademarks are the property of their respective owners. Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke N.V. 2014 © TP Vision Netherlands B.V. All rights reserved. www.philips.
