Register your product and get support at www.philips.
Contents 1 2 3 4 5 Important 3 Safety Care Legal Sustainability Help and support 3 4 5 7 8 Use your TV 9 TV controls Watch TV View program guide Play multimedia files Smart TV Interactive TV 9 11 14 15 18 20 Use more of your TV 21 Pause TV Record TV shows Use Skype™ Play games View Teletext Set locks and timers 21 22 25 28 29 30 Change your TV settings 32 Picture and sound Channels Language settings Universal access settings Other settings Update software Reset all 32 34 36 37 38 39 40
Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilled on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. Educate children about the dangers of climbing on furniture to reach the TV. Risk of swallowing batteries! The product/remote control may contain a coin type battery, which can be swallowed. Keep the battery out of reach of children at all times! Risk of overheating! Never install the TV in a confined space.
Your TV is equipped with a Kensington security slot at the base of the TV. To secure the TV, purchase a Kensington anti-theft lock (sold separately). TP Vision Netherlands B.V. cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
Open source This product contains software licensed under an open source license. For acknowledgments and license texts, please refer to the electronic in-product user manual. TP Vision Netherlands B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses.
Content owners use Microsoft PlayReady content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReadyprotected content.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.
TV controls Rear controls Remote control 1 1 2 2 3 3 4 1. VOL +/- (Volume): Increase or decrease volume. : Switch to the next or previous 2. CH channel. 3. INPUT: Watch a connected device. 4. :Switch the TV on or off. Sensors and indicators 4 5 1. (Standby): Switch the TV on or to standby. 2. Play buttons: Control playback of multimedia files. SOURCE: Watch a connected device. 3. 4. GUIDE: View program guide. 5. EXIT: Exit from menus or TV functions. 6 8 7 9 6. (Home): Access the Home menu. 7.
EasyLink controls 10 12 11 13 10. LIST: Access the TV channel list. FORMAT: Change the picture format 11. to suit the video source. INFO: Display information about 12. current activity. 13. OPTIONS: Access currently available options, picture and sound menus. 14 15 16 17 14. (Back): Return to the previous menu page or exit from a TV function. 15. CH +/-: Switch channels. 16. +/- (Volume): Adjust volume. (Mute): Mute or restore audio. 17. 18 20 19 21 18. Color buttons: Select tasks or options.
Switch TV on or off Automatic switch off You can save energy with this TV's energy efficiency settings, which are enabled by default. If there is no user interaction (such as pressing a remote control button or a control on the TV) for four hours, the TV will automatically switch to standby. To disable automatic switch off 1. While you watch TV, press the Green button on the remote control. 2. Select [Auto switch off], then press OK. 3. Select [Off], then press OK.
Switch TV channels Switch between antenna and cable channels. Rename channels. Reorder channels. Lock a channel. Listen to digital radio. Filter channels 1. While you watch TV, press LIST. 2. Press OPTIONS, then select [Filter]. 3. Select an option, then press OK. Press CH +/- on the remote control. Press CH on the TV. Press the Numeric buttons on the remote control to enter a channel number. Manage favorite channels You can view all channels or only a list of your favorite channels.
4. Select the channel to reorder, then press OK. 5. Press the Navigation buttons to move the highlighted channel to another location, then press OK. 6. Once complete, press OPTIONS. 7. Select [Exit reorder], then press OK. Lock a channel You can prevent unauthorized access to channels by locking them. 1. While you watch TV, press LIST. The channel list is displayed. 2. Select the channel to lock, then press OPTIONS. 3. Select [Lock channel], then press OK. 4. If prompted, enter the pin code.
Change picture format You can change the picture format to suit the video source. 1. Press FORMAT. 2. Select a picture format, then press OK. The available picture formats depend on the video source: [Auto fill]: Adjust the picture to fill the screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC. [Auto zoom]: Enlarge the picture to fill the screen. Recommended for minimal screen distortion but not for HD or PC.
From the Internet Make sure that your TV is connected to the Internet through a high-speed broadband connection. See Connect your TV > Connect to a network and the Internet (Page 53). Select Internet program guide Before you use the program guide, check these settings: 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [TV guide]. 3. Select [From the Internet], then press OK. Access Internet program guide 1. Press . 2. Select [TV guide], then press OK.
Note: If the apparatus does not return to DLNA mode due to external electrical disturbances (e.g. electrostatic discharge), user intervention is required. Set up media sharing 1. Install a media server on your computer to share media files. These are some media servers: For PC: Windows Media Player 11 (or higher) or TVersity For Mac: Twonky 2. Switch on media sharing on your computer using the media server. For more information on how to set up the media server, refer to the website of the media server.
[Media server]: When you play content from a media server, you can select another media server. [Shuffle on] / [Shuffle off]: Enable or disable random play of video files. [DivX(R) VOD]: Display the DivX registration and deregistration codes for this TV. Note: To view information about a video (for example, played position, duration, title, or date), select the video, then press INFO. INFO To hide the information, press again. Listen to music 1. Select in the top bar. 2. Select a track, then press OK.
1. When the TV displays the 8 or 10-digit registration code, write down the code and go to http://vod.divx.com. 2. Download the DivX player software on your computer and install the software. 3. Start the DivX player software and create a DivX Account: Click VOD > Create a DivX Account. 4. In the DivX player, register the TV with the registration code of the TV: Click VOD > Register a DivX Certified Device. 5.
Access Smart TV apps You can access apps through the Smart TV home page. The icons on this page represent the apps installed on your TV. To access an app, select the app, then press OK to confirm. Add apps 1. Select [App Gallery], then press OK. 2. Select an app, then press OK to add it to your home screen. 3. Follow the onscreen instructions to add the app. Tips: You can search for apps available in other countries. To return to the Smart TV home page, press LIST.
Access a video store 1. Press SMART TV. 2. Access the [App Gallery] to search for available video store apps in your country. 3. Select a store, then press OK to confirm. The icon of the video store is added to the home page. 4. To access a store, select its icon and press OK. Rent a video Follow the onscreen instructions to rent and watch the video. 1. Open a video store app. You may need to register or enter your log-in information. 2. Select a video. 3. Make the online payment. 4.
Pause TV What you can do While you watch a digital channel, you can pause a program to answer a phone call or to have a break. The broadcast is stored on a USB hard drive that is connected to the TV. You can resume playback of the program at any time. Note: You can pause a program for a maximum of 90 minutes. The USB hard drive is formatted exclusively for this TV. Keep it permanently connected to the TV. You cannot access the contents of the USB hard drive from another TV or PC.
Pause a live TV broadcast Record TV shows What you can do 07:55:06 07:24 A 08:31 B C If your TV can receive program guides, you can record TV programs onto a USB hard drive. You can record both current TV programs as well as future TV programs. Note: Recording is only supported in countries with program guides. In Nordic countries, the TV provides limited support for subtitles while recording TV programs. What you need 1. On a digital channel, press to pause a TV program. 2.
Do not overload the USB port. If you connect a USB hard drive device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Note: Make sure that the TV and the USB hard drive are switched off. While you are formatting the USB hard drive, do not connect other USB devices to the TV. USB 1. Connect the USB hard drive directly to the TV, or if you intend to connect other USB devices in future, connect the USB hard drive through a USB hub. 2.
Schedule a TV program recording You can schedule a recording of an upcoming program that will be broadcast today or up to eight days later. You can also schedule a timed recording that is not linked to any program, if program guide information is not available. 1. Press , then select [TV guide]. 2. Select the channel and program to record. 3. Optional: To record a program that will be broadcast on another day: press OPTIONS, select [Change day], then select another day. 4. Select [Record].
What you can do Talk to anyone else on Skype, anywhere in the world, for free. Make low-cost calls to phones and mobiles. A Skype subscription is required. Visit www.skype.com. Participate in conference calls. Send and receive voicemails. Forward a call. Manage your online status, 'mood' message, and profile information. Note: No emergency calls with Skype. Skype is not a replacement for your telephone and cannot be used for emergency calls.
Manage contacts You can add and view contacts that are online or offline. You can also block or unblock a selected contact. Add a contact 1. In the Skype menu, select [Contacts], then press OK. 2. Press OPTIONS, then select [Add Skype contact] or [Add SkypeOut Contact]. 3. Press OK to display the onscreen keyboard. 4. Follow the onscreen instructions to enter the details. A list of profiles is displayed. 5. Select a contact, then press OK. An invitation request is sent to the contact.
Zoom and pan your video 1. In [Full view], select [Zoom] +/- to zoom in or zoom out. A zoom and pan icon appears above the video display. 2. Use the Navigation buttons on the remote control to pan or tilt the camera. Video call options During a video call, press OPTIONS to access these options: [Full view]: See your contact in full screen view. [Dial pad]: Access dial pad. [Hold]: Put the call on hold. Full view will be stopped. [Mute]: Mute the microphone.
Manage voicemails If someone calls you on Skype and you are offline, they can leave a voice message in your Skype voicemail. Before you can receive voicemail, you need to activate voicemail in your Skype account — this can only be done on your computer. Play voicemail 1. In the Skype menu, select [History] and press OK. 2. Select [Voicemails], then press OK. 3. Select the voicemail, then press OK to play it. Delete voicemails 1. Select the voicemail from the list and press OPTIONS. 2.
Select a page While you watch channels that broadcast teletext, you can view the teletext. 1. Select a channel that broadcasts teletext, then press TEXT. 2. Select a page in one of these ways: Enter the page number with the Numeric buttons. Press CH + / CH - to view the next or previous page. Press the Color buttons to select a color coded item. Teletext options 1. While you view teletext, press OPTIONS. 2. Select an option: [Freeze page] / [Unfreeze page]: Freeze or unfreeze the current page.
Set locks and timers Clock You can display a clock on the TV. The clock displays the time that is broadcast by your TV service operator. Display the TV clock 1. While you watch TV, press OPTIONS. 2. Select [Clock], then press OK. The clock is displayed on the top right-hand corner of the TV screen. Change the clock mode You can change the clock mode to automatic or manual. By default, it is set to automatic mode, which automatically synchronizes it to Coordinated Universal Time (UTC).
English Child lock To protect children from unsuitable TV programs, you can lock the TV or block age rated programs. Set or change the child lock code 1. Press . 2. Select [Setup] > [Channel settings] > [Child lock]. 3. Select [Set code] or [Change code]. 4. Enter the code with the Numeric buttons. Tip: If you access the channels from the channel list, you are prompted to enter your lock code. If you forget your code, enter ‘8888’ to override any existing codes. Lock or unlock channels 1.
4 Change your TV settings Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Continue], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. More picture settings You can change the settings in the Picture menu. 1. Press . 2.
You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to change, then press OK. [Sound style]: Access predefined sound settings. [Restore style]: Restore the lastselected predefined sound setting. [Bass]: Adjust the bass level of the speaker and headphones. [Treble]: Adjust the treble level of the speaker and headphones. [Surround mode]: Select a surround sound mode to enhance your audio experience.
Reset picture and sound You can restore the default picture and sound settings, while the channel installation settings remain the same. 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [General settings] > [Factory settings], then press OK. 3. Select [OK], then press OK. All TV settings (except for channel settings) are reset to the default factory settings. Channels Automatic installation When the TV was switched on for the first time, a full installation of channels was performed.
If you know the channel frequency of the channels you want to install, you can search and store digital channels one by one. For best results, contact the service provider. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Digital: Reception test] > [Search channel], then press OK. 4. Press the Numeric buttons to enter the channel frequency. 5. Select [Search], then press OK. 6. When the channel is found, select [Store], then press OK.
Step 1: Check the country setting 1. Switch on the first TV (with the channels that you want to copy to the second TV). 2. Press . 3. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. The country menu is displayed. 4. Make a note of the current setting. 5. Press . 6. Press [Cancel] to exit. Step 2: Copy channel list to USB 1. Connect a USB storage device to the first TV (with the channels installed on it). 2. Press . 3. Select [Setup] > [Channel settings]. 4.
Subtitles on analog channels 1. While you watch an analog TV channel, press TEXT. 2. Enter the three-digit page number of the subtitles page, which is usually '888'. If available, subtitles are switched on. Subtitles on digital channels 1. While you watch a digital TV channel, press OPTIONS. 2. Select [Subtitles], then press OK. 3. Select [Subtitles off], [Subtitles on] or [Automatic], then press OK. Subtitle language When available, you can change the subtitle language for digital channels. 1.
Visually impaired access To make sure that a visually impaired audio language is available, press OPTIONS, then select [Audio language]. Languages that support visually impaired audio are indicated with an eye-shaped icon. Select speakers or headphones You can choose to hear the visually impaired audio through the TV speakers, headphones, or both. 1. While you watch TV, press OPTIONS. 2. Select [Universal access] > [Visually impaired]. 3. Select a setting, then press OK.
Check version 1. Press . 2. Select [Setup] > [Software settings] > [Current software info], then press OK. The current software version is displayed. Caution: Do not install a lower version of software than the current version installed on your product. TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade.
1. Remove all USB devices such as a Wi-Fi adapter from the TV, then switch on the TV. 2. Connect the USB flash drive to the TV. The software upgrade starts automatically. The upgrade is complete when a notification message appears on screen. 3. Before you restart the TV, disconnect the USB flash drive from the TV. 4. Press on the remote control — do not press more than once. The TV switches off, then back on again. The upgrade is complete. 5.
About cables An HDMI Audio Return Channel (ARC) connector allows output of TV audio to an HDMI ARC compliant device. Connect HDMI cables shorter than 5 meters/16.4 feet. Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections shown in this user manual are recommendations only. Other solutions are possible.
Connect antenna Connect the antenna to the TV. TV ANTENNA Connect devices Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. HDMI Connect the disc player with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
TV receiver English Connect the digital TV receiver with an antenna cable to the TV. TV ANTENNA Connect the satellite or digital TV receiver with an HDMI cable to the TV. HDMI Connect the digital TV receiver with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Video recorder Connect the recorder with an antenna cable to the TV. REC TV ANTENNA Connect the recorder with an HDMI cable to the TV. REC HDMI ARC Connect the recorder with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Game console English Connect the game console with an HDMI cable to the TV. HDMI Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. AUDIO L/R YPbPr Home theater Connect an HDMI-ARC compliant home theater with an HDMI cable to the TV.
Connect the home theater with an HDMI cable and a coaxial audio cable to the TV. Digital Audio Out HDMI Connect the home theater with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. AUDIO L/R YPbPr Digital camera Connect the digital camera with a USB cable to the TV.
Digital camcorder English Connect the digital camcorder with an HDMI cable to the TV. HDMI Connect the digital camcorder with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Connect more devices USB storage device USB USB Connect the USB flash drive with a USB cable to the TV. Connect the USB hard drive with a USB cable to the TV. Computer Connect the computer with an HDMI cable to the TV.
English Connect the computer with a DVI-HDMI cable and an audio cable to the TV. HDMI AUDIO IN DVI/VGA Video call camera Connect the Philips TV video camera - PTA317 (sold separately) with a USB cable to the TV.
Watch connected devices Select a device Before you can watch a device, connect the device to the TV. See Connect your TV > Connect devices (Page 42). Select a device with SOURCE SOURCE on the remote 1. Press control, or INPUT on the TV. 2. Select a device, then press OK. Select a device from Home menu 1. Press . 2. Select [Source], then press OK. 3. Select a device, then press OK. Update the source list If you add or remove a device, update the source list. 1. Press SOURCE. 2. Press OPTIONS. 3.
Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link to retain picture quality. Maximize display for subtitled video Some video subtitles can create a separate subtitle bar under the video, which limits the video display area. To maximize the video display area, you can switch on auto subtitle shift and display the subtitles on the video image. What you need Connect a HDMI-CEC compliant device to the TV.
3. Select one of the following, then press OK. [On]: Hear the TV audio through the connected HDMI-ARC compliant device. [Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector. Note: Make sure that all HDMI-CEC settings are properly set up on the connected device. Set up TV speakers 1. Press . 2. Select [Setup] > [TV settings] > [Sound] > [Advanced] > [TV speakers]. 3. Select an option, then press OK: [Off]: Switch off TV speakers.
English Connect to a network and the Internet Connect Internet What you can do View Media If you connect the TV to a home network, you can play photos, music and videos from your computer. See Use your TV > Play multimedia files (Page 15). Smart TV If you connect the TV to a home network with an Internet connection, you can browse Smart TV. Smart TV offers Internet services and websites tailored to your TV. Play music and videos, consult infotainment, rent movies and much more.
Wi-Fi ready Scan for routers With the Philips wireless USB adapter PTA127, you can connect the TV to your home network wirelessly. Note: The wireless network operates in the same 2.4GHz frequency spectrum as common household devices, such as Dect phones, microwave ovens or Bluetooth devices, which can cause Wi-Fi interference. Move these devices away from the TV. If you have several routers in your network, you can select the network you need. 1.
English Set secured connection with WEP encryption If you have WEP security encryption, the TV asks for the WEP encryption key in hexadecimal numbers. 1. Locate the hexadecimal key in the router software on your PC and make a note of the first key in the WEP keys list. 2. Enter it on TV with the remote control. If the security key is accepted, the TV is connected with the wireless router. 3. If prompted, agree to the End User License Agreement.
6 Troubleshooting General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis: No action is required. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance.
Channel issues You want to install TV channels: See Change your TV settings > Automatic installation (Page 34) for instructions on installing analog or digital channels. No digital channels were found during the installation: See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. Make sure that all cables are properly connected and that the correct network is selected.
Sound issues There is picture but no sound from the TV: If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Make sure that all cables are properly connected. Make sure that the volume is not muted or set to zero. Make sure that the TV speakers setting is selected. Press OPTIONS, select [Picture and sound] > [Speakers], and then select [TV].
You want to establish a wireless connection between your TV and home network: Refer to Connect your TV > Connect to a network and the Internet > Wi-Fi Ready (Page 54) for instructions on how to connect your TV wirelessly to your home network. Smart TV does not work: Check that the router is properly connected to the TV, and that your router has open access to the Internet.
7 Specifications Power and reception Product specifications are subject to change without notice. Power Mains power: AC 220-240V (50-60Hz) Standby power consumption: < 0.3 W Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2).
File Extensions .mpg .mpeg .vob .ts Container PS Video codec Maximum resolution Max. Frame Rate (fps) Max. Bit Rate (Mbps) MPEG-1 1920x1088 25p, 30p, 50i, 60i 30 USB Media server CEHTML HTML5 YouTube Yes Yes Yes Yes MPEG-2 1920x1088 25p, 30p, 50i, 60i 30 No Yes Yes Yes Yes MPEG-4 ASP 1920x1088 25p, 30p, 50i, 60i 30 No Yes Yes Yes Yes H.
Supported audio/video formats File Extensions Container .asf .wmv ASF Video codec Maximum resolution Max. Frame Rate (fps) Max. Bit Rate (Mbps) MPEG-2 1920x1088 25p, 30p, 50i, 60i 20 MPEG-4 ASP 1920x1088 25p, 30p, 50i, 60i 20 WMV9/VC1 1920x1088 30p, 60i 20 MPEG-4 ASP 1920x1088 25p, 30p, 50i, 60i 4 30p, 60i 4 .avi .xvid AVI DivX 3.11 1920x1088 .webm WebM VP8 1920x1088 .swf SWF Contains FLV - MPEG-4 ASP .divx DMF (DIVX) DivX 3.11 Audio codec MPEG-1 (L1&L2), MPEG1,2,2.
Headphones: stereo 3.
8 Index connect, game console • 45 A connect, home theater • 45 amplifier, select output • 51 analog channels, fine-tune • 35 analog channels, install • 34 analog channels, subtitles • 37 audio language • 36 auto subtitle shift • 52 Auto switch off, devices • 51 C connect, home network • 53 connect, Internet • 53 connect, recorder • 44 connect, TV receiver • 43 connect, USB device • 48 connect, video call camera • 49 connected device, rename • 50 connectivity • 63 connectivity guide • 8 connectors • 4
energy efficient settings • 7 EPG • 14 lock TV • 5 M English EasyLink, TV speakers • 51 EPG, broadcaster • 14 media server program • 15 EPG, Internet • 15 mode, home or shop • 38 external hard disk • 48 Multimedia Home Platform (MHP) • 20 F multimedia, play files • 15 multimedia, play options • 16 favorite channels, list • 12 multimedia, supported formats • 60 G N game console, connect • 45 network settings • 55 game settings • 28 network, connect • 53 H network, TV name • 55 HbbTV •
program guide, Internet • 15 Skype, video call • 26 Skype, voice call • 26 R Skype, voicemails • 28 rear controls • 9 sleep timer • 30 record TV, one-touch • 23 Smart TV • 18 record TV, USB hard drive • 22 Smart TV, apps • 19 record, TV programs • 22 Smart TV, browse • 18 recorder, connect • 44 Smart TV, network • 53 recordings, delete • 24 Smart TV, start • 18 recordings, schedule • 23 smartphone control • 10 recordings, watch • 24 software, check version • 39 recycle • 7 software, dig
TV guide • 14 English TV guide, broadcaster • 14 TV guide, Internet • 15 TV receiver, connect • 43 TV speakers, mute • 11 U universal access, enable • 37 universal access, hearing impaired • 37 universal access, visually impaired • 38 update, source list • 50 USB, play files • 16 V video call camera • 49 video store • 19 visually impaired access • 38 volume • 11 W Wi-Fi ready, setup • 54 wireless, USB adapter • 54 Y YouTube • 18 YPbPr, component video • 41 EN 67
All registered and unregistered trademarks are the property of their respective owners. Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. 2013 © TP Vision Netherlands B.V. All rights reserved. www.philips.
