2584.3 en.qxd 29-03-2007 10:48 Pagina 1 About this User Manual EN This manual contains all information you will need to initially install and operate your new TV. Also read the help texts which are being displayed at the bottom of the screen. If this instruction manual does not give an answer or if ‘Troubleshooting’ does not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied Worldwide guarantee booklet.
584.3 en.qxd 29-03-2007 10:48 Pagina 2 Safety warnings EN General Do not insert the power plug in a wall socket or hang the TV to the wall before all connections are made. • Place or hang the TV wherever you want, but make sure that air can circulate freely through the ventilation slots. • TV channel logo: present a problem if they are bright and stationary.
2584.3 en.qxd 29-03-2007 10:48 Pagina 3 Getting started EN Before you start Warning: do not insert the mains cord into the mains at the bottom of the TV and in a wall socket or hang the TV on the wall before all connections are made. Before you switch on your TV, connect all your peripheral equipment. See To make video and audio connections, p. 41. Overview of the rear connector panel There is a wide range of audio and video equipment that can be connected to your TV.
2584.3 en.qxd 29-03-2007 10:48 Pagina 4 Getting started (Continued) EN Overview of the side connector panel - To connect a camera, camcorder or game, see To make video and audio connections, p. 42. USB - To connect a headphone, see To make video and audio connections, p. 42. - To connect a USB device, see Multimedia browser, p. 35. Connect the antenna < Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. Tip: for best quality use the suppressor cable supplied.
2584.3 en.qxd 29-03-2007 10:48 Pagina 5 Use of the remote control RC4350 EN B Standby Press to switch the TV from or to standby mode. When switched to standby, a red indicator on the TV lights up. B Attention: the TV is never powered off completely unless it is physically unplugged.
2584.3 en.qxd 29-03-2007 10:48 Pagina 6 Use of the remote control RC4350 (Continued) EN b Teletext On/Off Press to switch teletext on. See Teletext, p. 38-40. Only for UK: Digital text/Interactive television. B Attention: not all channels transmit interactive television applications at all times. DVD STB TV VCR AUX i b SELECT V Volume Press + or - to adjust the volume. DEMO ¬ Mute key: interrupt the sound or restore it.
2584.3 en.qxd 29-03-2007 10:48 Pagina 7 Use of the OPTION key B DVD STB TV VCR AUX i SELECT b DEMO a OPTION ® ® OK EN The OPTION key allows you to display the Quick access menu which will give you direct access to some features and menu options. 1. Press the OPTION key. > The Quick access menu appears. 2. Press the cursor up/down to select a menu item. 3. Press the OK key to jump to the selected menu item in the TV menu. (Except for the Clock option). 4.
2584.3 en.qxd 29-03-2007 10:48 Pagina 8 Keys at the right side of the TV EN < < VOLUME MENU PROGRAM/CHANNEL B In case your remote is lost or broken, apart from channel selection and volume adjustment, you can still change some of the basic settings with the keys at the side of your TV. Press the power switch B to switch the TV on or off. The MENU key can be used to summon the TV menu without the remote control. Use the VOLUME - and + keys and the PROGRAM/CHANNEL - and + keys to select menu items.
2584.3 en.qxd 29-03-2007 10:48 Pagina 9 Switch the TV on < EN Press the power switch B at the side of the TV or the B key on the remote control. Note: the first time (and only the first time) you switch on your TV, you see a Welcome screen followed by the installation procedure. See First time installation, p. 10. First time installation The installation procedure consists of a series of screens that will guide you through the installation of your TV. Follow the instructions on screen.
2584.3 en.qxd 29-03-2007 EN 10:48 Pagina 10 First time installation (Continued) Step 1: select your on-screen language After the Welcome screen you are asked to select a language of the TV's on-screen menus.The text of the header and the info on screen continuously change language. Also the digital audio and subtitle language will be set to the selected menu language. B DVD STB TV VCR AUX i SELECT 1. Press the cursor up/down to highlight your language. 2. Press the OK key on the remote control. 3.
2584.3 en.qxd 29-03-2007 10:48 Pagina 11 First time installation (Continued) EN Step 3: Settings assistant: select your TV settings PHILIPS Installation This will help you to complete the Settings assistant.
2584.3 en.
2584.3 en.qxd 29-03-2007 10:48 Pagina 13 How to navigate through the menus (continued) TV menu TV settings Features Installation TV settings Settings assistant Reset to standard Picture Sound EN 5. Press the cursor right to enter the highlighted menu item. > The content of the right panel is moved to the left panel and the right panel now shows the content of the newly highlighted item in the left panel.
2584.3 en.qxd 29-03-2007 10:48 Pagina 14 Use of the TV menu settings (continued) EN TV menu TV settings Features Installation TV settings Settings assistant Reset to standard Picture Sound Info A. Change settings in an easy-to-use manner with the Settings assistant. Each time you've made a selection, press the green key to confirm your selection. 1. Select Settings assistant and press the cursor right.
2584.3 en.qxd 29-03-2007 10:48 Pagina 15 Adjust picture menu settings TV menu TV settings Features Installation TV settings Settings assistant Reset to standard Picture Sound EN The picture menu contains the settings that affect the quality of the picture. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV menu is moved to the left. 3. Select TV settings and press the cursor right.
2584.3 en.qxd 29-03-2007 10:48 Pagina 16 Adjust picture menu settings (Continued) EN TV menu TV settings Settings assistant Reset to standard Picture Sound Info Picture ............. Custom tint Pixel Plus Dig. Natural Motion Dynamic contrast DNR ............. Custom tint (only when Tint is set to Custom) Fine tunes the white point (WP) and black level (BL) of the picture. 1. Select Custom tint and press the cursor right. 2.
2584.3 en.qxd 29-03-2007 10:48 Pagina 17 Adjust picture menu settings (Continued) TV menu TV settings Settings assistant Reset to standard Picture Sound Picture ............. DNR MPEG artefact red. Colour enhancem.. Active control Light sensor Picture format Info EN MPEG artefact reduction MPEG artefact reduction On smoothens the transitions on digital content. < Select On or Off. Colour enhancement Automatically controls green enhancement and blue stretch. It makes the colours more vivid.
2584.3 en.qxd 29-03-2007 10:48 Pagina 18 Adjust sound menu settings EN TV menu TV settings Settings assistant Reset to standard Picture Sound Info Sound Equalizer Volume Balance Digital audio lang.. Dual I/II Mono/Stereo ............. The sound menu contains the settings that affect the quality of the sound. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3.
2584.3 en.qxd 29-03-2007 10:48 Pagina 19 Adjust sound menu settings (Continued) Dual I/II TV menu TV settings Settings assistant Reset to standard Picture Sound Info EN Sound ............. Mono/Stereo Surround mode Headphone volume AVL Delta volume Auto surround Allows you to select, per channel, Dual I or II, when dual sound transmission is available. Mono/Stereo Allows you to select, per TV channel, Mono or Stereo sound when stereo broadcasts are available.
2584.3 en.qxd 29-03-2007 10:48 Pagina 20 Adjust feature menu settings EN The Features menu allows you to control the settings of special TV functions, features and accessory equipments. TV menu TV settings Features Installation Info Features Subtitle Digital subtitle lan.. Sleeptimer Childlock Set/Change code On timer ............. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3.
2584.3 en.qxd 29-03-2007 10:48 Pagina 21 Adjust feature menu settings (Continued) TV menu TV settings Features Installation Features ............. Sleeptimer Childlock Set/Change code On timer Common interface Demo EN Sleeptimer This sets a time period after which the TV automatically switches to standby. 1. Select Sleeptimer. 2. Press the cursor right. 3. Select a value with the cursor up/down. > The list will have values from 0 to 180 minutes.When 0 is selected, the sleeptimer is switched off.
2584.3 en.qxd 29-03-2007 10:48 Pagina 22 Adjust feature menu settings (Continued) EN TV menu TV settings Features Installation Info Features ............. Sleeptimer Childlock Set/Change code On timer Common interface Demo Set code/Change code This allows you to set or change the personal 4-digit access code that is used in the different lock functions of the TV. < < Select Set or Change code. > If no PIN-code exists yet, the menu item is set to Set code. Follow the instructions on screen.
2584.3 en.qxd 29-03-2007 10:48 Pagina 23 Adjust feature menu settings (Continued) TV menu TV settings Features Installation Features EN Common interface Note: this functionality is only available in certain countries. ............. Sleeptimer Childlock Set/Change code On timer Common interface Demo This allows you to access common interface applications defined by the service provider of the Common Interface (CI) module.
2584.3 en.qxd 29-03-2007 10:48 Pagina 24 How to search for and store TV channels EN Tip: you will need this chapter only if you want to change the installation settings. Installation menu Television TV menu Channel list Programme guide Multimedia TV menu TV settings Features Installation Installation Languages Country Time zone Channels Preferences Connections .............
84.3 en.qxd 29-03-2007 10:48 Pagina 25 How to search for and store TV channels (Continued) TV menu TV settings Features Installation Installation ............. Channels Preferences Connections Decoder Factory settings Software upgrade EN Select your country This allows you to select the country where you are now located.
2584.3 en.qxd 29-03-2007 10:48 Pagina 26 How to search for and store TV channels (Continued) EN Installation update TV menu Installation Languages Country Time zone Channels Preferences Connections Decoder ............. This allows you to automatically tune to and update all available digital channels without altering the sorting of existing channels. For example, the name of the channel is not altered. Channels Autom. installation Installation update Digital: test recept.. Analogue: manual..
2584.3 en.qxd 29-03-2007 10:48 Pagina 27 How to search for and store TV channels (Continued) Analogue: manual installation TV menu Installation Languages Country Time zone Channels Preferences Connections Decoder ............. Info EN Channels Autom. installation Installation update Digital: test recept.. Analogue: manual.. Rearrange This gives you the possibility to manually install (tuning-in channel by channel) analogue channels.
2584.3 en.qxd 29-03-2007 10:48 Pagina 28 Rearrange the channel number list EN TV menu Installation Languages Country Time zone Channels Preferences Connections Decoder ............. Channels Autom. installation Installation update Digital: test recept.. Analogue: manual.. Rearrange < Reshuffle 1. 2. 3. Info This allows you to rename, to reshuffle and to uninstall or reinstall the stored channels. Press the corresponding colour keys and follow the on screen instructions. 4.
2584.3 en.qxd 29-03-2007 10:48 Pagina 29 Set your preferences TV menu Installation ............. Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Info Preferences Location Teletext 2.5 OSD Programme title EN This menu contains items that can set or adjust various special TV functions and that will typically be accessed only occasionally. Select your location This allows you to select the location of your TV.
2584.3 en.qxd 29-03-2007 10:48 Pagina 30 Select your connections EN TV menu Installation ............. Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Connections EXT1 EXT2 EXT3 HDMI 1 HDMI 2 Side DIGITAL AUDIO IN Info This allows you to select the peripheral equipment you have connected to the audio and video connectors. 1. Select Connections. 2. Press the cursor right. 3. Select the input to which the peripheral equipment is connected.
2584.3 en.qxd 29-03-2007 10:48 Pagina 31 Reset the Factory settings TV menu Installation EN This allows you to reset most of the predefined factory states. Factory settings 1. Select and press the cursor right. 2. Press the OK key to erase settings and reset them to their default values. ............. Reset Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Info How to upgrade the TV software TV menu Installation Software upgrade Current softw. info .............
® 2584.3 en.qxd 29-03-2007 10:48 Pagina 32 Create your favourite list EN This allows you to select up to four favourite channels lists with your preferred TV channels and radio stations. For example, each member of your family can create his/her own favourite list. In addition to the favourite channel lists you may also select a list with only digital TV channels or a list with only the radio channels or a list with only the analogue channels.
2584.3 en.qxd 29-03-2007 10:48 Pagina 33 Create your favourite channels list (Continued) EN To select only TV or only radio channels on the All channels list When the All channels list is displayed or selected you may filter the list and select a list with only the TV channels or a list with only the radio channels. 1. Press the FAV key. > The last selected channel list appears. 2. Press the cursor left. 3. Select the All channels list and press the cursor right. 4. Press the red colour key to filter.
2584.3 en.qxd 29-03-2007 10:48 Pagina 34 EPG (Electronic Programme Guide) (Continued) EN B DVD STB TV VCR AUX i SELECT b DEMO a OPTION ® ® OK ® a ® BROWSE b MENU + V + ¬ P 2. Press the green colour key on the remote control to watch/listen to the selected programme currently on air. 3. Press the red colour key to mark/unmark a reminder on the selected programme. You can set up to a maximum of 10 reminders.
2584.3 en.qxd 29-03-2007 10:48 Pagina 35 Multimedia Browser EN The Multimedia browser lets you display pictures or play audio files stored on a USB device.The Multimedia browser application is invoked from the main menu. B DVD STB TV VCR AUX i SELECT b -Following file formats can be reproduced: for pictures: JPEG for audio: MP3, MP3 Pro, LPCM - Only FAT/DOS-formatted memory devices are supported. - Philips can not be held responsible if your USB device is not supported.
2584.3 en.qxd 29-03-2007 10:48 Pagina 36 Multimedia Browser (Continued) EN Television Multimedia Browser menu TV menu Channel list Programme guide Multimedia USB device USBDevice 1 Picture Music London 2005 Picture The Beatles Xmas2004.alb arnold.jpg USBDevice 1 Picture London 2005 London2005 pic001.jpg The Beatles pic002.jpg Xmas2004.alb pic003.jpg arnold.jpg pic004.jpg USBDevice 1/Picture/London2005 London2005 pic001.jpg pic001.jpg pic002.jpg pic003.jpg pic004.
2584.3 en.
2584.3 en.qxd 29-03-2007 10:48 Pagina 38 Teletext EN Note:Teletext is not available via equipment connected to the HDMI connector. B Most TV channels broadcast information via teletext. This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time. After each programme change, the memory is refreshed. DVD STB TV VCR AUX i b SELECT DEMO < a OPTION Press b to switch the teletext on. > The main index page appears on the screen.
2584.3 en.qxd 29-03-2007 10:48 Pagina 39 Teletext (Continued) EN Hypertext With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page. B 1. Press the OK key to highlight the first word or a number on the page. 2. Use the cursor up/down, left/right to select any other word or number you want to search for. 3. Press the OK key to confirm.The search starts.
2584.3 en.qxd 29-03-2007 10:48 Pagina 40 Teletext (Continued) EN Digital text (only for UK) B Some digital channels offer dedicated digital text services (for instance BBCi). DVD STB TV VCR AUX i 1. Press b to switch Digital text on. b SELECT DEMO Note: UK only: digital text is displayed when programmes are carrying digital text or interactive services. a OPTION ® b OK ® ® ® BROWSE b MENU + + ¬ V P - - 1 2 3 4 5 6 7 8 9 AV 0 0 v Ò ‡ π † 2.
2584.3 en.qxd 29-03-2007 10:48 Pagina 41 To make video and audio connections EN Tip: use the inputs that are available on your equipment that provide the best video or audio performance, as below. Note: your TV comes with all types of connectors with the exception of the DVI connector but some of your equipment may be equipped with this type. In this case you'll need a DVI to HDMI adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer.
2584.3 en.qxd 29-03-2007 10:48 Pagina 42 To make video and audio connections - Side panel overview EN Camera, Camcorder, Game USB 2 3 1 1. Connect your camera, camcorder or game as shown. 2. Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3. S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEO input 1 and AUDIO inputs 3. Warning: do not connect cable 1 and 2 at the same time.
2584.3 en.
2584.3 en.qxd 29-03-2007 10:48 Pagina 44 Connect a VCR or DVD recorder EN Warning: do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5 m from the screen. EXT2 EXT 1/2 EXT1 CABLE 1 o o DIGITAL OUT AUDIO o ANTENNA L o AUDIO OUT o R DIGITAL AUDIO IN 75 3 2 With a eurocable 1. Connect the aerial cables 1 and 2 as shown. 2. Connect the eurocable 3 as shown. 3.
2584.3 en.qxd 29-03-2007 10:48 Pagina 45 Connect two VCRs or VCR and DVD recorder EN Note: you can not record signals from equipment connected to the YPbPr input. EXT2 With eurocables EXT1 EXT 1/2 CABLE o o ANTENNA 75 DIGITAL AUDIO IN L o AUDIO OUT o R 3 o DIGITAL OUT AUDIO With aerial cables only 4 1 5 2 RECORDER 1. Connect the aerial cables 1 and 2 as shown. 2. Connect your VCRs or DVD-recorder to EXT1 and 2 with the eurocables 4 and 5. 3.
2584.3 en.qxd 29-03-2007 10:48 Pagina 46 Connect a DVD player, HD receiver or game console EN Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys. With a HDMI connector HDMI 1/2 o o HDMI 1 HDMI 2 o DIGITAL OUT AUDIO o o ANTENNA DIGITAL AUDIO IN 75 L o AUDIO OUT o R HDMI is the leading new standard for Digital video and audio interconnection. 1. Connect your equipment with the HDMI connector. 2.
2584.3 en.qxd 29-03-2007 10:48 Pagina 47 Connect a DVD player, a satellite receiver or HD receiver EN Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys. With Component Video Connectors Y Pb 1. Connect the three separate component video cables 1 to the YPbPr jacks on the DVD player and to the Y, Pb and Pr jacks of EXT3 on the TV. 2. Connect the audio cable 2 to the digital out of the equipment and to the DIGITAL AUDIO IN connector of the TV. 3.
2584.3 en.
2584.3 en.qxd 29-03-2007 10:48 Pagina 49 Connect a Home Cinema amplifier Y Pb Pr Digital Home Cinema amplifier G B R AUDIO L/R V H < EXT3 EXT2 EN EXT1 Connect a digital Home Cinema amplifier to the DIGITAL AUDIO OUT connector 1 at the bottom of the TV. Tip: to avoid visible delay between picture and sound, use this DIGITAL AUDIO OUT connector to connect your Home Cinema amplifier.
2584.3 en.qxd 29-03-2007 10:48 Pagina 50 Use the Common Interface slot EN Warning: switch off your TV before any module is inserted in the Common Interface slot. Note: this functionality is only available in certain countries. COMMON INTERFACE COMMON INTERFACE COMMON INTERFACE o o o o HDMI 1 HDMI 2 TOP To receive scrambled DTV signals you will need a CA (Conditional Access) module and a Smart card provided by the service provider.
2584.3 en.qxd 29-03-2007 10:48 Pagina 51 Select connected equipment a OPTION EN Before operating your connected equipment you have to make a selection in the Installation, Select your connections menu, p. 30. ® ® OK ® ® BROWSE b MENU + V + ¬ BROWSE - P - MENU 1 2 3 4 5 6 Press the MENU/BROWSE key. Select TV menu and press the cursor right. Select Installation. Press the cursor right. Select Connections. Press the cursor right.
2584.3 en.qxd 29-03-2007 10:48 Pagina 52 Audio- and video equipment keys EN Most of the audio and video equipment from our range of products can be operated with the remote control of your TV. B DVD STB TV VCR AUX i b SELECT DEMO a OPTION ® OK ® ® ® BROWSE b MENU + + V ¬ P - - 1 2 3 4 5 6 7 8 9 AV 0 0 Press one of the keys after you pressed the SELECT key repeatedly according to the equipment you want to operate with this remote control.
2584.3 en.qxd 29-03-2007 10:48 Pagina 53 Troubleshooting Symptom Possible cause/Remedy No picture < Verify if the supplied cables are connected properly. (The aerial cable to the EN TV, the other aerial to your recorder, the power cables, ..) < Verify if you selected the correct source. < Verify if the child lock has been switched off. Poor picture < Verify in the Manual installation menu if you have selected the correct TV system.
2584.3 en.qxd 29-03-2007 EN 10:48 Pagina 54 Troubleshooting (Continued) Symptom Possible cause/Remedy The remote does not function < Verify if the remote is set correctly for the equipment your are using. < Verify if the batteries are not dead. Replace the batteries. You can still use the keys at the left side of the TV. < Select TV mode on your remote control.
2584.3 en.qxd 29-03-2007 10:48 Pagina 55 Annex 1 - Philips TV software upgrade with portable memory EN Introduction Philips continuously tries to improve its products and it wants you to profit of that even after your purchase. Therefore it allows you to upgrade your TV software using a USB memory device (not supplied). You can execute the software upgrade procedure yourself. Verifying the version of the TV software TV menu Installation .............
2584.3 en.qxd 29-03-2007 10:48 EN Pagina 56 Annex 1 (Continued) Upgrade the TV software Software Upgrade Application Upgrade busy... Software Id: TL32E-234 Loading Done Validating Done Programming 1. Switch off your TV and remove all memory devices. 2. Insert the USB portable memory that contains the downloaded software upgrade. 3. Switch on your TV with the power key B at the side of the TV. 4. The upgrade process starts automatically.
2584.3 en.qxd 29-03-2007 10:48 Pagina 57 Annex 1 (Continued) EN Local software upgrade procedure TV menu Installation Software upgrade Current softw. info ............. Local upgrades Channels Manual network i.. Announcement Preferences Connections Decoder Factory settings Software upgrade Info New software, or the currently installed software version, can also be obtained from the www.philips.com/support website. 1. Go to www.philips.com/support using the web browser of your PC. 2.
2584.3 en.qxd 29-03-2007 10:48 Pagina 58 Annex 2 - Philips TV-Slideshow Format with background music EN Notes: - the latest version of this document can be found on the Philips support website (www.philips.com/support). Use the type number of your TV to find this documentation and other related files. - Philips can’t be held responsible for any problems that may occur as a result of the content in this document.
2584.3 en.qxd 29-03-2007 10:48 Pagina 59 Annex 2 (Continued) EN Supported XML-tags The following table gives a description of the XML syntax. Tag Name Use philips-slideshow mandatory Description Philips slideshow signature including the version. title optional The title of the playlist. audio optional The audio-URL following this tag will define the music playing in the background during the slideshow. A single song or playlist (.m3u & .pls) are the only valid audio references.
2584.3 en.qxd 29-03-2007 10:48 Pagina 60 EN Annex 3 - Philips TV - Digital camera and USB issues Notes: - the latest version of this document can be found on the Philips support website (www.philips.com/support); - the software of your TV is upgradeable. If you have problems first check if you have the latest software installed on your TV. The latest software, together with instructions, can be found on the Philips support website.
2584.3 en.qxd 29-03-2007 10:48 Pagina 61 Annex 4 - Issues referring to connected peripherals with a HDMI connector Note:Teletext will not be available via equipment connected to a HDMI connector.
2584.3 en.qxd 29-03-2007 10:48 EN Pagina 62 Index active control ........................... 17 analogue: manual installation . 27 antenna......................................... 4 audio receiver .......................... 49 audio equipment keys............. 52 auto format............................... 17 automatic installation.............. 25 avl (audio volume leveller)..... 19 HDMI connector................ 46,61 headphone................................. 42 headphone volume ..................
2584.3 en.qxd 29-03-2007 10:48 Pagina 63 Recycling Recycling EN Disposal of batteries R The packaging of this product is intended to be recycled. Apply to the local authorities for correct disposal. The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations.