Specifications

Mechanical Instructions
EN 12 SDI PDP 2K64.
4.1.2 Flat Cable Connector of X-main Board
• Dis-assembly:
1. Pull out the clamp of connector.
2. Pull Flat cable out press down lightly.
3. Turn the Flat Cable reversely.
• Re-assembly: Put the Flat Cable into the connector press
down lightly until you hear a “Click“.
Figure 4-3 Dis-assembly FCC of X-main board
Figure 4-4 Re-assembly FCC of X-main board
G_16380_014.eps
190606
G_16380_015.eps
190606